ICONTEC 2042-1985 《汽车，用于空气制动系统中的水罐》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1826-2012 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded《铝合金粘结用低挥发性有机化合物 (VOC.pdf

ASTM E1827-1996(2007) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door《用风孔门测定建筑物空气密封性的标准试验方法》.pdf

ASTM E1827-2011 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door《以气口鼓风门测定建筑物气密性的标准试验方法》.pdf

ASTM E1827-2011(2017) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door《利用气口鼓风门测定建筑物气密性的标准试验方法》.pdf

ASTM E1829-2002 Standard Guide for Handling Specimens Prior to Surface Analysis《先于表面分析的样品处置标准指南》.pdf

ASTM E1829-2009 Standard Guide for Handling Specimens Prior to Surface Analysis《先于表面分析的样品处置标准指南》.pdf

ASTM E1829-2014 Standard Guide for Handling Specimens Prior to Surface Analysis《先于表面分析的样品处置的标准指南》.pdf

ASTM E1830-2004 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules《测定光电压模数的机械一体性的标准试验方法》.pdf

ASTM E1830-2009 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules《测定光电压模数的机械一体性的标准试验方法》.pdf