ICONTEC 952-1981 《塑料，PVC以及PVCA树脂，粘滞度的测量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AIA NAS 1667-1979 (Inactive)Backshell Electrical Connector 90 Degrees Strain Relief Superseded - August 1979 (Use MIL-C-83723 15) (Rev 2).pdf

AIA NAS 1668-1981 (Inactive)Plug Grommet Sealing Electrical Connector Superseded - December 1981 (Use MS3187) (Rev 1).pdf

AIA NAS 1669-1991 Fastener - Blind Internally Threaded External Sleeve General Purpose Protruding Head Self-Locking (Rev 5).pdf

AIA NAS 167-1955 (Inactive)Cap - Pilots Control Wheel Trigger Switch Cavity Cancelled - November 1955 (Rev 2).pdf

AIA NAS 1670-1991 Fastener - Blind Internally Threaded External Sleeve General Purpose Flush Head Self-Locking (Rev 5).pdf

AIA NAS 1671-1991 Fastener - Blind Internally Threaded External Sleeve High Temperature Protruding Head Self-Locking (Rev 8).pdf

AIA NAS 1672-1991 Fastener - Blind Internally Threaded External Sleeve High Temperature Flush Head Self-Locking (Rev 6).pdf

AIA NAS 1673-1991 Fastener - Blind Internally Threaded External Sleeve Lightweight Protruding Head Self-Locking (Rev 6).pdf

AIA NAS 1674-1991 Fastener - Blind Internally Threaded External Sleeve Lightweight Flush Head Millable & Non-Millable Self-Locking (Rev 5).pdf