INDITECNOR 21-10ch-1956 《肥料：氧化钙（CaO）和碳酸钙（CaC03）的测量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears《用于检测齿轮中的磨削损伤的巴克豪森(Barkhausen)噪声检验法》.pdf

AGMA 99FTM10-1999 Design and Testing of a Low Noise Marine Gear《低噪声船用齿轮的设计和试验》.pdf

AGMA 99FTM11-1999 Performance of Nitrided Gears in High Speed Epicyclic Gearbox Used in Gas Turbogenerators - a Case Study《燃气轮机发电机组用高速行星齿轮箱中的氮化齿轮的性能.一项案例分析》.pdf

AGMA 99FTM12-1999 Gearbox Field Performance from a Rebuilder's Perspective《从维修者的角度看到的变速箱的野外性能》.pdf

AGMA 99FTM13-1999 Failures of Bevel-Helical Gear Units on Traveling Bridge Cranes《桥式起重机上的伞形-螺旋齿轮装置的故障》.pdf

AGMA 99FTM14-1999 Effect of Material Defects on Gear Performance - a Case Study《材料缺陷对于齿轮性能的影响.一项案例分析》.pdf

AGMA 99FTM15-1999 Theoretical Model for Load Distribution on Cylindric Gears Application to Contact Stress Analysis《圆柱形齿轮上的负荷分布的理论模型.接触应力分析的应用》.pdf

AGMA 99FTM16-1999 Multi-Objective Optimization of Nonstandard Gears Including Robustness《非标准齿轮的多目标优化(包括稳健性)》.pdf

AGMA 99FTM17-1999 Synthetic Oils for Worm Gear Lubrication《螺旋齿轮润滑用合成油》.pdf