INDITECNOR 23-46ch-1956 《油脂物体：皂化值的测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

ASTM F24-2004 Standard Method for Measuring and Counting Particulate Contamination on Surfaces《表面粒状杂质的测量和计数标准方法》.pdf

ASTM F24-2009 Standard Method for Measuring and Counting Particulate Contamination on Surfaces《表面颗粒状污染物的计数和测量标准方法》.pdf

ASTM F24-2009(2015) Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces《表面粒状杂质的测量和计数的标准试验方法》.pdf

ASTM F25 F25M-2009 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas《电子及类似用途用的清洁室及其它防尘区域空气中粒状杂质的筛分和计算的标准.pdf

ASTM F25 F25M-2009(2015) Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas《洁净室和其他粉尘控制地区中气载颗粒污染的大小和计数的标准试.pdf

ASTM F25-2004 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas《洁净室及其它防尘区域空气中粒状杂质的测量和计数的标准试验方法》.pdf

ASTM F256-2005(2010) Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium《含有18%或26%铬的铬铁密封合金的标准规范》.pdf

ASTM F256-2005(2015) Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium《铬含量为18%或者28%的铬-铁密封合金的标准规格》.pdf

ASTM F256-2005e1 Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium《含有18%或26%铬的铬铁焊接用合金的标准规范》.pdf