INTA 15 03 04 《挥发性液体的碱度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25073-1981 Ceramik base outdoor insulators for voltage over 1000 B Types main parameters and dimensions《室外用电压（10～220）V铠装棒形支承绝缘子 型式 基本参数和尺寸》.pdf

GOST 25075-1981 Manually operated valves for marine piping Nominal pressures and diameters《船舶系统用管路 手控配件 规定压力及通径》.pdf

GOST 25076-1981 Nonmetallic materials for interior trim of motor vehicles Method of flammability determination《汽车运输工具内部装饰用非金属材料 易燃性测定法》.pdf

GOST 25084-1989 Universal dies with changeable built-up tool sets General specifications《带可换组件的通用冲压模具 一般技术要求》.pdf

GOST 25085-1981 Refractories Method of determination for strength under bending at elevated temperatures《耐火材料和制品 高温抗弯强度测定方法》.pdf

GOST 25088-1998 Ship-s doors Specifications《船门 技术条件》.pdf

GOST 25089-1981 Printing paper for voluminous editions Specifications《多卷本书籍印刷用纸 技术条件》.pdf

GOST 25095-1982 Sintered hardmetals Method of determination of elastic modulus (of Young-s modulus)《烧结硬质合金 弹性模数测定法(杨氏模量)》.pdf

GOST 25096-1982 Basic norms of interchangeability Butters thread Tolerances《互换性基本规范 米制锥螺纹》.pdf