1、For General Specifications, see ESP-B-10.101-GS. For Dimensions, see ESP-B-12.101-GS. This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2008 by Navistar, I
2、nc. DECEMBER 2008 Page 1 of 1 NAVISTAR, INC. Engineering Standard Parts NUMBER: ESP-B-12.121-PP TITLE: Square Neck Carriage Bolts Preferred Parts (Noun Code 0810) CURRENT ISSUE DATE: December 2008 WRITTEN/REVIEWED BY: Corporate Technical Standards APPROVED BY: Corporate Technical Standards SUPERSEDE
3、S ISSUE OF: August 2006 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Change Notice: Added part number 414790000 (1/2-13 X 2, 5, ZN6A). Changed finish specification ZN8F to ZN6A. International Truck and Engine Corporation replaced by Navistar, Inc. per corporate directive. No
4、minal Size-TPI Length Finish Material Part Number 1/4 -20 1 3/4 ZN6A 5 598799R1 1/4 -20 2 ZN6A 5 598800R1 1/4 -20 2 1/4 PHC 5 26144R1 5/16 -18 2 ZN6A 5 598807R1 5/16 -18 2 1/4 ZN6A 5 27443R1 3/8 -16 1 3/4 ZN6A 5 598811R1 3/8 -16 2 ZN6A 5 598812R1 3/8 -16 2 1/2 ZN6A 5 441549R1 3/8 16 3 ZN6A 5 40085R1
5、 3/8 -16 3 1/4 PHC 5 28659R1 3/8 -16 4 1/2 ZN6A 5 27350R1 1/2 -13 2 ZN6A 5 414790000 1/2 -13 2 3/4 ZN6A 5 591514R1 1/2 -13 3 3/4 ZN6A 5 27463R1 1/2 -13 5 1/2 PHC 5 26882R1 5/8 -11 3 ZN6A 5 608337R1 PREFERRED PARTS Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
