1、INTERNATIONAL TRUCK AND ENGINE CORPORATION NUMBER: Engineering Standard Parts ESP-C-21.221-NPP TITLE: Fillister Head Machine Screws and Spring Lock Washer Assemblies Non Preferred Parts (Noun Code 7450) CURRENT ISSUE DATE: May 2007 WRITTEN/REVIEWED BY: APPROVED BY: SUPERSEDES ISSUE OF: Corporate Tec
2、hnical Standards August 2006 Corporate Technical Standards PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Change Notice: Nominal size-TPI of 21563R1 corrected from 6/16-24 to 5/16-24. NON-PREFERRED PARTSPart Nominal Length Drive Finish Material Number Size-TPI 6 -32 5/16 SL ZN
3、6A CST 454161 8 -32 7/16 SL ZN6A CST 17092R91 8 -32 1/2 SL ZN6A CST 17093R91 8 -32 9/16 SL ZN6A CST 16784R91 10 -32 1 1/4 SL ZN6A CST 19652R91 12 -24 1/2 SL ZN6A CST 19562R91 12 -24 5/8 SL ZN6A CST 19563R91 12 -24 3/4 SL ZN6A CST 19542R91 1/4 -20 3/4 SL ZN6A CST 271468 1/4 -20 7/8 SL ZN6A CST 271212
4、 * 1/4 -20 7/8 SL ZN6A CST 25162R1 5/16 -24 3/4 CR PLN CST 21563R1 For Dimensions, see ESP-C-21.202-NPP. For Preferred Parts, see ESP-C-20.101-PP. For General Specifications, see ESP-C-10.101-GS. * Header Point Drive Abbreviations = SL - Slotted CR - Cross Recess This document is restricted and may
5、not be sent outside International Truck and Engine Corporation or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2007 by International Truck and Engine Corporation MAY 2007 Page 1 of 1 Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
