1、INTERNATIONAL TRUCK AND ENGINE CORPORATION Engineering Standard Parts NUMBER: ESP-D-40.221-NPP TITLE: Self-Drilling Tapping Screws- Non Preferred Parts (Noun Code 7450)CURRENT ISSUE DATE: February 2007 WRITTEN/REVIEWED BY: Corporate Technical Standards APPROVED BY: Corporate Technical Standards SUPE
2、RSEDES ISSUE OF: August 2006 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Change Notice: Part number 27904RI corrected to 27904R1. Added 40326R1 (10-16x1, BSD, ZN6A, PL-HEX). NON-PREFERRED PARTSNominal Size-TPI Length Type Finish Recess Head Panel Thickness Part Number STYLE
3、 2 POINT 6 -32 3/8 CSD ZN6A CR-PAN .035-.090 328404C1 8 -18 7/16 BSD ZN6A CR-PAN .035-.100 388973C1 8 -18 7/16 BSD ZN6A CR-OVAL .035-.100 328386C1 8 -18 1/2 BSD ZN6A PL-HEX .035-.100 161421C1 8 -18 5/8 BSD ZN6A CR-FLAT .035-.100 393164C1 8 -18 3/4 BSD CRB CR-OVAL .035-.100 28440R1 10 -16 7/16 BSD CR
4、B CR-PAN .035-.110 27835R1 10 -16 1/2 BSD CRB CR-PAN .035-.110 27904R1 10 -16 9/16 BSD ZN6A CR-PAN .035-.110 379232C1 10 -16 5/8 BSD ZN6A CR-FLAT .035-.110 328393C1 10 -16 3/4 BSD PHC CR-PAN .035-.110 27649R1 10 -32 1/2 CSD ZN6A CR-PAN .035-.110 307072C1 10 -32 1/2 CSD ZN6A CR-OVAL .035-.110 328403C
5、2 10 -32 1/2 CSD PHC PL-HEX .035-.110 27559R1 1/4 -14 7/8 BSD ZN6A CR-PAN .035-.175 453869C1 1/4 -14 1 1/4 CSD ZN6A CR-PAN .035-.175 381654C1 1/4 -14 1 3/4 CSD ZN6A CR-PAN .035-.175 381655C1 STYLE 3 POINT 6 -20 1/2 BSD ZN6A CR-PAN .090-.110 433003C1 10 -16 5/8 BSD ZN6A CR-OVAL .110-.175 27888R1 10 -
6、16 9/16 BSD ZN6A CR-PAN .110-.175 328396C1 10 -16 1 BSD ZN6A CR-PAN .110-.175 409978C1 10 -16 1 BSD ZN6A CR-OVAL .110-.175 27492R1 10 -16 1 BSD ZN6A PL-HEX .110-.175 40326R1 10 -16 1 1/4 BSD ZN6A CR-OVAL .110-.175 27493R1 1/4 -14 1 BSD ZN6A PL-HEX .110-.210 27705R1 CR Cross Recess PL Plain, No Reces
7、s - Do not use for new design. When possible, eliminate from current design. FOR PREFERRED PARTS, SEE ESP-D-40.121-PP. For General Specifications, see ESP-D-40.101-GS. This document is restricted and may not be sent outside International Truck and Engine Corporation or reproduced without permission
8、from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2007 by International Truck and Engine Corporation FEBRUARY 2007 Page 1 of 1 Copyright International Truck and Engine Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
