IRAM 11 006-1958 《单节机动轨道车的活塞》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 15876-5-2003 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5 Fitness for purpose of the system《冷热水装置用塑料管道设备 聚丁烯(PB) 第5部分 耐磨性的测定ISO .pdf

EN ISO 15876-5-2017 en Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 Fitness for purpose of the system《冷热水用塑料管道系统(PB)Polybutene -第5部分 系统的适.pdf

EN ISO 15877-1-2009 en Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 General (Incorporates Amendment A1 2010)《冷热水.pdf

EN ISO 15877-2-2009 en Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 Pipes (Incorporates Amendment A1 2010)《冷热水装置.pdf

EN ISO 15877-3-2009 en Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 Fittings (Incorporates Amendment A1 2010)《冷热.pdf

EN ISO 15877-5-2009 en Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5 Fitness for purpose of the system (Incorpora.pdf

EN ISO 15880-2004 en Paints varnishes and binders - Determination of MEQ value of water-based coating materials and binders《色漆 清漆和粘合剂 水基涂料和粘合剂的MEQ值的测定 ISO 15880-2000》.pdf

EN ISO 15882-2008 en Sterilization of health care products - Chemical indicators - Guidance for selection use and interpretation of results《医疗保健产品的灭菌化学指示剂选择 使用和检验结果的解释指南》.pdf

EN ISO 15883-1-2009 en Washer-disinfectors - Part 1 General requirements terms and definitions and tests (Incorporates Amendment A1 2014)《洗涤器消毒器 第1部分 一般要求 术语 定义和测试》.pdf