IRAM 1150-1956 《油漆 在氧化锌和二氧化钛作用下呈浅色，内部明亮》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 7602 3-1979 HARD METAL DRAWING DIES FOR STEEL BARS AND TUBES Dimensions《这种黄色行跳过不翻译 》.pdf

STAS 7602 4-1979 HARD METAL DRA WING DIES FOR NON-FERROUS METAL BARS AND TUBES Dimensions《有色金属棒材和管材的硬质金属拉延模具 尺寸 》.pdf

STAS 7602 5-1980 HARD METAL DRAWING DIES FOR BARS Dimensions《制造条棒的硬质金属拉丝模具尺寸 》.pdf

STAS 7603-1966 《牵引拉丝模 合成金属碳化物制圆形金属线 大小 尺寸》.pdf

STAS 7604-1966 《牵引拉丝模 合成金属碳化物制铁心棒大小 尺寸》.pdf

STAS 7605-1982 RAPID STEEL SHANK MILLING CUTTERS General technical requirements for quality《高速钎尾MII鳕鱼切割机 一般质量技术要求 》.pdf

STAS 7606-1966 《农用机械 名称和符号》.pdf

STAS 7607 1-1990 Electrolytic refined aluminium and Primary technical aluminium Grades《电解精炼铝和主要铝品级 》.pdf

STAS 7608-1988 DEKORMING ALUMINIUM ALLOYS Grades《测定铝合金等级 》.pdf