IRAM 17 716-1960 《摄影用亚铁氰化钾》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 12FTM12-2012 Manufacturing Method of Pinion Member of Large-Sized Skew Bevel Gears Using Multi-Axis Control and Multi-Tasking Machine Tool.pdf

AGMA 12FTM13-2012 Gear Material Selection and Construction for Large Gears.pdf

AGMA 12FTM14-2012 Large Pinions for Open Gears The Increase of Single Mesh Load - A New Challenge for Manufacturing and Quality Inspection.pdf

AGMA 12FTM15-2012 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears.pdf

AGMA 12FTM16-2012 Gear Design Optimization for Low Contact Temperature of a High-Speed Non-lubricated Spur Gear Pair.pdf

AGMA 12FTM17-2012 Dynamic Analysis of a Cycloidal Gearbox Using Finite Element Method.pdf

AGMA 12FTM18-2012 Analysis of Ripple on Noisy Gears.pdf

AGMA 12FTM19-2012 A Field Case Study of Whining Gear Noise in Diesel Engines.pdf

AGMA 12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting.pdf