IRAM 2087-1948 《活节连轴器插座（工业装置用简化双极型）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 20365-1974 Broaches round of variable cutting of diameters from 14 to 90 mm Design and dimensions《直径由14mm～90mm交替切削圆拉刀 结构及尺寸》.pdf

GOST 20370-1974 Methyl methacrylate Specifications《乙基丙烯酸酯 技术条件》.pdf

GOST 20373-1994 Reducers and gear-motors Assembly variations《减速器及马达减速器 装配形式》.pdf

GOST 20376-1974 Heat-insulating packing board Specifications《衬垫用隔热纸板 技术条件》.pdf

GOST 20377-1974 Bottom boards of aluminium alloys for moulding bohes having inside dimensions length from 400 to 500 mm width from 300 to 400 mm Construction and dimensions《净尺寸 长40.pdf

GOST 20378-1974 Bottom boards of aluminium alloys for moulding boxes naving inside dimensions length from 600 mm width 500 mm Construction and dimensions《净尺寸 长600mm，宽500mm铸型箱用铝合金制砂.pdf

GOST 20379-1974 Bottom boards of aluminium alloys for moulding boxes having inside dimensions length 800 mm width 700 mm Construction and dimensions《净尺寸 长800mm，宽700mm铸型箱用铝合金制砂箱垫板 结.pdf

GOST 20380-1974 Cast iron bottom boards for moulding boxes having inside dimensions length from 400 to 500 mm width from 300 to 400 mm Construction and dimensions《净尺寸 长400~500mm,宽3.pdf

GOST 20381-1974 Cast iron bottom boards from moulding boxes having inside dimensions length 600 and 800 width 500 and 700 mm Construction and dimensions《净尺寸 长600及800mm，宽500及700mm铸型.pdf