IRAM 534-1953 《铸铁用具》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D1974 D1974M-2010 Standard Practice for Methods of Closing Sealing and Reinforcing Fiberboard Boxes《闭合、密封和增强纤维板箱的方法的标准实施规程》.pdf

ASTM D1974 D1974M-2016 Standard Practice for Methods of Closing Sealing and Reinforcing Fiberboard Boxes《纤维板箱封口 密封和加固方法的规程》.pdf

ASTM D1974-1998(2003) Standard Practice for Methods of Closing Sealing and Reinforcing Fiberboard Boxes《纤维板箱封口、密封及加固方法的标准实施规范》.pdf

ASTM D1975-1995(2006) Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails《塑料注模开口桶抗环境应力断裂的标准试验方法》.pdf

ASTM D1975-1995(2010) Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails《塑料注模开口桶抗环境应力断裂的标准试验方法》.pdf

ASTM D1975-2016 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails《塑料注塑模制开口桶的环境应力开裂耐性标准试验方法》.pdf

ASTM D1976-2007 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy《用电感耦合氩等离子原子发射光谱法对水中元素的标准试验方法》.pdf

ASTM D1976-2012 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy《电感耦合氩等离子原子发射光谱法测定水中元素的标准试验方法》.pdf

ASTM D1976-2018 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy.pdf