IRAM 6563-1954 《型号120的航空用润滑油》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 28136-11-1989 Agitator vessels position and sizes of cover nozzles for glass lined steel agitator vessels type CE with a nominal volume of 4000 litres for replacement purposes《.pdf

DIN 28136-14-1999 Agitator vessels - Part 14 Position and sizes of cover nozzles for glass lined steel agitator vessels position H for vessels form BE with d = 2400 mm to 3600 mm a.pdf

DIN 28136-2-2005 Agitator vessels - Part 2 Positions and sizes of cover nozzles in non-alloy and stainless steel vessels《搅拌容器 第2部分 非合金和不锈钢容器顶盖喷嘴的位置和尺寸》.pdf

DIN 28136-3-2005 Agitator vessels - Part 3 Position and sizes of cover nozzles for glass lined steel agitator vessels《搅拌容器 第3部分 搪玻璃钢件搅拌容器顶盖喷嘴的位置和尺寸》.pdf

DIN 28137-1-2015 Mounting flanges for agitation units - Part 1 For vessels of steel《搅拌器用安装凸缘 第1部分 钢制容器用》.pdf

DIN 28137-2-2005 Mounting flanges for agitation units - Part 2 Typ E for glass lined vessels《搅拌器用安装凸缘 第2部分 玻璃内衬容器用E型安装凸缘》.pdf

DIN 28138-1-2006 Rotating mechanical seals for agitator shafts - Part 1 Carbon or stainless steel - Operating data assembly dimensions《搅拌器轴的滚动机构密封 第1部分 碳钢或不锈钢 使用数据、组装尺寸》.pdf

DIN 28138-2-2006 Rotating mechanical seals for agitator shafts - Part 2 Steel glass-lined - Operating data assembly dimensions《搅拌器轴的滚动机构密封 第2部分 线纹玻璃钢 使用数据、组装尺寸》.pdf

DIN 28138-3-2006 Rotating mechanical seals for agitator shafts - Part 3 Connections for barries fluids cooling control and mounting and designation system for rotating mechanical s.pdf