IS 10479-1993 Automotive vehicles Operator controls and displays on scooters and motorcycles Recommendations (First Revision).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25472-1982 Iron ores Method for the determination of coefficient of potentiality of grind《铁矿石 磨碎系数测定法》.pdf

GOST 25473-1982 Iron ores and concentrates Method for the determination of mineralogical type《铁矿石及精矿 矿物类型测定法》.pdf

GOST 25476-1982 Hudraulic fluid power and lubricating systems Filters Acceptance and methods of tests《液压驱动的容积和润滑系统过滤器 验收规则及试验方法》.pdf

GOST 25479-1982 Packets of three-cassets press moulds for manufacturing the rubber-fabric chevron cuffs Design and dimensions《制造人字形橡胶衬布皮碗用压模三盒组件 结构及尺寸》.pdf

GOST 25480-1982 Packets of three-cassets press moulds for manufacturing the rubber-fabric locking rings Design and dimensions《制造橡胶衬布压环用压模三盒组件 结构及尺寸》.pdf

GOST 25481-1982 Packets of three-cassets press moulds for manufacturing the rubber-fabric carrier rings Design and dimensions《制造橡胶衬布支撑环用压模三盒组件 结构及尺寸》.pdf

GOST 25483-1995 Garden watering-pots Specifications《花园菜园用喷壶 技术条件》.pdf

GOST 25485-1989 Cellular concretes Specifications《气泡混凝土 技术条件》.pdf

GOST 25491-1982 Collision avoidance systems Terms and definitions《飞船防碰撞系统 术语和定义》.pdf