IS 13701-1993 Dentistry Dental rotary instruments Test methods.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24987-1981 Instrument boards for two pilot cockpits Requirements for configuration and instrallation of flight engineer instrumentation board《两个飞行员的飞机座舱仪表 随航工程师对仪表盘的布置及安装要求》.pdf

GOST 24990-1981 Pipeline valves with protective coating Main parameters《有保护层的管道附件 基本参数》.pdf

GOST 24991-1981 Ferrochromium ferrosilicochromium ferrosilicon ferrosilicomanganese ferromanganese Methods of sampling and sample preparation for chemical and physical-chemical ana.pdf

GOST 24992-2014 Masonry structures Method of estimating bonding strength in masonry《砌体结构 砌体粘结强度的评估方法》.pdf

GOST 24996-1981 Turning tools with mechanical clamped changeable polyhedral plates fixed by swing pin Types and basic dimensions《用摆动销钉固定的可拆刀片车刀 型式及基本尺寸》.pdf

GOST 24997-2004 Gauges for metric thread Tolerances《公制螺纹用量规 公差》.pdf

GOST 24998-1981 Gauges for tapes thread of valves and gas-bags Tolerances《气瓶及阀门上圆锥螺纹用量规 公差》.pdf

GOST 24999-1981 Flight vehicle hydromechanics Terms definitions and symbols《飞行器流体力学 术语、定义和符号》.pdf

GOST 25001-1981 Rolled-welded aluminium sheet billets for heat-exchangers Specifications《铝热交换器构件 技术条件》.pdf