IS 13829-1993 Pesticide Method for determination of residues in agricultural and food commodities soil and water Atrazine and simazine.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 95FTM3-1995 Effect of Manufacturing Errors on the Predicted Dynamic Factors of Spur Gears《制造误差对直齿轮预计动力因数的影响》.pdf

AGMA 95FTM4-1995 Experimental Test Stand to Measure Loaded Transmission Error in Fine-Pitch Plastic Gears《测量小节距塑料齿轮的负荷传动误差的实验室试验台》.pdf

AGMA 95FTM5-1995 Surface Fatigue Life of Contour Induction Hardened AISI 1552 Gears《沿齿廓感应淬火硬化AISI1552齿轮的表面疲劳寿命》.pdf

AGMA 95FTM6-1995 Development of an Epicyclic Gearbox for Reduced Sub-Synchronous Vibrations in Gas Turbo-Generator Sets《要发展成为一个行星齿轮箱 为降低次同步振动的天然气涡轮发电机组》.pdf

AGMA 95FTM7-1995 Experimental and Analytical Assessment of the Thermal Behavior of Spiral Bevel Gears《螺旋伞齿轮的热行为的实验和分析评估》.pdf

AGMA 95FTM8-1995 Miner's Rule - A More Definitive Approach《密纳(Miner)法则.一种更加精确的方法》.pdf

AGMA 95FTM9-1995 Bending and Compressive Stress Analysis of External Helical Gearsets of Varying Contact Ratios《不同重合度的外部螺旋齿轮组的弯曲和抗压应力分析》.pdf

AGMA 95FTMS1-1995 Determination of the Dynamic Gear Meshing Stiffness of an Acetal Copolymer《共聚甲醛的动力齿轮啮合刚度测定》.pdf

AGMA 96FTM1-1996 Computer Based Approach Aimed at Reproducing Master Spiral Bevel and Hypoid Pinions and Gears《针对制造主螺旋伞齿轮和准双曲面齿轮和齿轮的基于计算机的方法》.pdf