IS 3009-1993 Brushs shoe polishing Specification (Second Revision).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 60749-3-2002 en Semiconductor Devices Mechanical and Climatic Test Methods Part 3 External Visual Examination《半导体器件 机械和气候试验方法 第3部分 外观检查 IEC 60749-3-2002 部分替代 EN 60749 1999+A1-20.pdf

EN 60749-3-2017 en Semiconductor devices - Mechanical and climatic test methods - Part 3 External visual examination.pdf

EN 60749-30-2005 en Semiconductor devices - Mechanical and climatic test methods Part 30 Preconditioning of non-hermetic surface mount devices prior to reliability testing (Incorpo.pdf

EN 60749-31-2003 en Semiconductor devices - Mechanical and climatic test methods Part 31 Flammability of plastic-encapsulated devices (internally induced)《半导体器件 机械和气候试验方法 第31部分 塑料密.pdf

EN 60749-32-2003 en Semiconductor devices - Mechanical and climatic test methods Part 32 Flammability of plastic-encapsulated devices (externally induced) (Incorporates Amendment A.pdf

EN 60749-33-2004 en Semiconductor devices Mechanical and climatic test methods Part 33 Accelerated moisture resistance Unbiased autoclave《半导体器件 机械和气候试验方法 第33部分 加速抗湿 无偏压热器 IEC 60749.pdf

EN 60749-34-2010 en Semiconductor devices - Mechanical and climatic test methods - Part 34 Power cycling《半导体器件 机械和气候试验方法 第34部分 动力循环》.pdf

EN 60749-35-2006 en Semiconductor devices Mechanical and climatic test methods Part 35 Acoustic microscopy for plastic encapsulated electronic components《半导体器件 机械和气候试验方法 第35部分 塑封电子.pdf

EN 60749-36-2003 en Semiconductor devices Mechanical and climatic test methods Part 36 Acceleration steady state《半导体器件 机械和气候试验方法 第36部分 稳态加速 IEC 60749-36-2003》.pdf