IS 4290 Pt 1-1992 Roughness comparison specimens Part 1 Turned ground bored milled shaped and planed (First Revision).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2578-2007 Standard Practice for Calculation of Mean Sizes Diameters and Standard Deviations of Particle Size Distributions《平均尺寸 直径的计算和粒径分布的标准偏差的标准实施规程》.pdf

ASTM E2578-2007(2012) Standard Practice for Calculation of Mean Sizes Diameters and Standard Deviations of Particle Size Distributions《计算平均尺寸 直径的计算和粒径分布的标准偏差的标准实施规程》.pdf

ASTM E2578-2007(2018) Standard Practice for Calculation of Mean Sizes Diameters and Standard Deviations of Particle Size Distributions《粒度分布的平均尺寸 直径和标准偏差计算的标准实施规程》.pdf

ASTM E2579-2007 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics《评估表面燃烧特性的样品制备和木制品安装用标准实施规程》.pdf

ASTM E2579-2011 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics《制备并架设表面燃烧特性评估所用木材产品样本的标准操作规程》.pdf

ASTM E2579-2012 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics《表面燃烧特性评估用木材制品的样品制备和安装的标准实施规程》.pdf

ASTM E2579-2013 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics《表面燃烧特性评估用木材制品的样品制备和安装的标准实施规程》.pdf

ASTM E2579-2015 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics《为评估木材制品表面燃烧特性而进行试样制备和安装的标准实践规程》.pdf

ASTM E2580-2007 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications《航空航天用平板复合材料和夹层芯材的超声波测试用标准实施规程》.pdf