IS 9825-1993 Chlorine tablets Specification (First Revision).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2958-2014 Standard Test Methods for Kinetic Parameters by Factor Jump Modulated Thermogravimetry《采用因子跳跃 调制热重法测定动力参数的标准试验方法》.pdf

ASTM E2962-2014 Standard Guide for Fleet Management《车队管理的标准指南》.pdf

ASTM E2963-2014 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine B.pdf

ASTM E2963-2015 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine B.pdf

ASTM E2963-2016 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine B.pdf

ASTM E2964-2014 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors《测定门的归一化插入损耗的标准试验方法》.pdf

ASTM E2964-2014e1 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors《测量门的标准化插入损耗的标准试验方法》.pdf

ASTM E2965-2015 Standard Test Method for Determination of Low Levels Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter《采用耗氧热量计测定材料与产品的低水平热释放率的标准试.pdf

ASTM E2965-2016 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter《采用耗氧热量计测定材料与产品的低水平热释放率的.pdf