ITU-R BO 1773-2006 Criterion to assess the impact of interference to the broadcasting-satellite service from emissions of devices without a corresponding frequency allocation in themi.pdf

上传人:hopesteam270 文档编号:790087 上传时间:2019-02-02 格式:PDF 页数:2 大小:87KB
下载 相关 举报
ITU-R BO 1773-2006 Criterion to assess the impact of interference to the broadcasting-satellite service from emissions of devices without a corresponding frequency allocation in themi.pdf_第1页
第1页 / 共2页
ITU-R BO 1773-2006 Criterion to assess the impact of interference to the broadcasting-satellite service from emissions of devices without a corresponding frequency allocation in themi.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 Rec. ITU-R BO.1773 1 RECOMMENDATION ITU-R BO.1773*Criterion to assess the impact of interference to the broadcasting-satellite service from emissions of devices without a corresponding frequency allocation in the Radio Regulations, that produce fundamental emissions in the frequency bands allocated

2、 to the broadcasting satellite service (2006) Scope There are well-established criteria in the Radio Regulations that address the amount of interference allowed between the broadcasting-satellite service and other services with an allocation in the Radio Regulations. However, there exist no criteria

3、 to assess the impact of interference from fundamental emissions of devices that have no corresponding frequency allocation in the Radio Regulations but operate in frequency bands allocated to the broadcasting-satellite service. This Recommendation presents the necessary criterion for assessing the

4、impact on the BSS from devices without a corresponding frequency allocation. The ITU Radiocommunication Assembly, considering a) that well-established criteria exist in the Radio Regulations (RR) with regard to the amount of interference allowed between the broadcasting-satellite service (BSS) and o

5、ther services with an allocation in the RR; b) that radio devices exist and are also being developed that are intended to be operated with no corresponding frequency allocation in the RR; c) that the fundamental emissions of such devices may occur in frequency bands allocated to the BSS; d) that the

6、re is no established criterion to assess the impact on BSS from emissions of these devices; e) that several applications are envisioned for these devices, for example short-range communications, surveillance systems, imaging systems, vehicle radar collision avoidance systems and others, many of whic

7、h are intended for mass-marketing deployments; f) that high-density clusters of these devices are expected in certain environments such as homes, office buildings, highways and business cores, where BSS receivers are also deployed or expected to be deployed; g) that there are many broadcasting-satel

8、lite systems in service or under development, with tens of millions of subscribers, characterized by high-density ubiquitous deployments; h) that it is necessary to define a criterion to assess impact on BSS receivers from these device emissions in order to design satellite links to take into accoun

9、t the interference, *This Recommendation should be brought to the attention of Radiocommunication Study Group 1. 2 Rec. ITU-R BO.1773 recommends 1 that the total interference to systems operating in the BSS, from devices with no corresponding frequency allocation in the RR, should at no time exceed 1% of the total receiving system noise under clear sky conditions (i.e. T/T 1%).

展开阅读全文
相关资源
猜你喜欢
  • ASTM F959-2007 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners《与结构紧固件一起使用的可压缩垫圈型直接拉力指示器的标准规格》.pdf ASTM F959-2007 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners《与结构紧固件一起使用的可压缩垫圈型直接拉力指示器的标准规格》.pdf
  • ASTM F959-2009 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners《与结构紧固件一起使用的可压缩垫圈直接拉力指示器的标准规范》.pdf ASTM F959-2009 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners《与结构紧固件一起使用的可压缩垫圈直接拉力指示器的标准规范》.pdf
  • ASTM F959-2013 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners《与结构紧固件一起使用的可压缩垫圈型直接张力指示器的标准规范》.pdf ASTM F959-2013 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners《与结构紧固件一起使用的可压缩垫圈型直接张力指示器的标准规范》.pdf
  • ASTM F959-2015 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners《使用结构紧固件的可压缩洗衣机类型直接张力指示器的标准规格》.pdf ASTM F959-2015 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners《使用结构紧固件的可压缩洗衣机类型直接张力指示器的标准规格》.pdf
  • ASTM F959M-2006 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]《与结构紧固件一起使用的可压缩垫圈型直接张力指示器的标准规范(米制)》.pdf ASTM F959M-2006 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]《与结构紧固件一起使用的可压缩垫圈型直接张力指示器的标准规范(米制)》.pdf
  • ASTM F959M-2007 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]《与结构紧固件一起使用的可压缩垫圈型直接张力指示器的标准规范(米制)》.pdf ASTM F959M-2007 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]《与结构紧固件一起使用的可压缩垫圈型直接张力指示器的标准规范(米制)》.pdf
  • ASTM F961-2003 Standard Specification for Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Forgings for Surgical Implants [UNS R30035]《外科植入物用钴镍铬钼合金锻件标准规范》.pdf ASTM F961-2003 Standard Specification for Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Forgings for Surgical Implants [UNS R30035]《外科植入物用钴镍铬钼合金锻件标准规范》.pdf
  • ASTM F961-2008 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)《外科植入用锻制35钴-35镍-20铬-10钼合金锻件的标准规范(UNS R30035)》.pdf ASTM F961-2008 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)《外科植入用锻制35钴-35镍-20铬-10钼合金锻件的标准规范(UNS R30035)》.pdf
  • ASTM F961-2014 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)《外壳植入物用35钴-35镍-20铬-10钼合金锻件的标准规格 (UNS R30035)》.pdf ASTM F961-2014 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)《外壳植入物用35钴-35镍-20铬-10钼合金锻件的标准规格 (UNS R30035)》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1