ITU-R BR 1216-1-2001 Recording of Television or Sound Programmes on Magnetic Tape in the Case When Several Programmes are Intended for Broadcasting in the Same Digital Multiplex《在几.pdf

上传人:registerpick115 文档编号:790150 上传时间:2019-02-02 格式:PDF 页数:2 大小:69.18KB
下载 相关 举报
ITU-R BR 1216-1-2001 Recording of Television or Sound Programmes on Magnetic Tape in the Case When Several Programmes are Intended for Broadcasting in the Same Digital Multiplex《在几.pdf_第1页
第1页 / 共2页
ITU-R BR 1216-1-2001 Recording of Television or Sound Programmes on Magnetic Tape in the Case When Several Programmes are Intended for Broadcasting in the Same Digital Multiplex《在几.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 Rec. ITU-R BR.1216-1 1 RECOMMENDATION ITU-R BR.1216-1*Recording of television or sound programmes on magnetic tape in the case when several programmes are intended for broadcasting in the same digital multiplex (Questions ITU-R 239/11, and ITU-R 215/10) (1995-2001) The ITU Radiocommunication Assemb

2、ly, considering a) that bit-rate reduction techniques applied to digital video and digital audio can lead to substantial reduction in the bit rate required for the delivery of digital television or sound programmes and of their ancillary components; b) that this might allow the multiplexing of two o

3、r more digital television and sound programmes on a bit stream commensurate with the delivery capabilities of the digital emission channel; c) that such a multiplexed bit stream might carry programme components whose contents are related to each other, or are independent and unrelated; d) that there

4、 will be a need to record those programme components at the origination studio or at the continuity studio, and to also record them upon reception in the home; e) that the technical specifications for television and sound programme home recording are the responsibility of the International Electrote

5、chnical Commission (IEC), to which the ITU-R provides relevant user requirements from the viewpoint of the broadcasters; f) that 7.4 of Recommendation ITU-R BR.469 specifies that “separate programmes should always be on separate spools”, and a similar requirement is also specified in other Recommen-

6、dations on good operating practices for television and sound programme recording; g) that there are operating advantages in recording on the same tape a television or sound programme complete with all the components that are related to its content (e.g. multichannel audio). On the contrary, the reco

7、rding of possible multiplex components that are not related to the programme content might place a penalty on the maximum programme duration that can be recorded on a tape or cassette, _ *This Recommendation replaces Recommendation ITU-R BR.1214, which is hereby deleted. 2 Rec. ITU-R BR.1216-1 recom

8、mends 1 that, when several television programmes are multiplexed on the same emission channel, each programme should be placed on a separate tape or cassette when it is recorded at the origination studio or at the continuity studio; 2 that such television or sound programme recordings should as far

9、as possible contain all the components that are related to the content of the programme (e.g. multichannel audio); 3 that those possible multiplex components that are not related to the content of the programme (e.g. conditional access) should preferably be recorded separately, if they need to be recorded at all.

展开阅读全文
相关资源
猜你喜欢
  • FORD ESA-M2D50-B-2009 TUBE UNREINFORCED RUBBER-FUEL LINE  TO BE USED WITH FORD WSS-M99P1111-A  《燃料管用不增强橡胶软管  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD ESA-M2D50-B-2009 TUBE UNREINFORCED RUBBER-FUEL LINE TO BE USED WITH FORD WSS-M99P1111-A 《燃料管用不增强橡胶软管 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD ESA-M2D52-A-2004 HOSE HIGH TEMPERATURE - LOW PRESSURE - OIL RESISTANT  TO BE USED WITH FORD WSS-M99P1111-A  《耐高温、低压、抗油软管  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD ESA-M2D52-A-2004 HOSE HIGH TEMPERATURE - LOW PRESSURE - OIL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐高温、低压、抗油软管 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD ESA-M2D69-A-2009 RUBBER NEOPRENE LATEX - COATING - OIL RESISTANT  TO BE USED WITH FORD WSS-M99P1111-A  《有涂层的抗油氯丁胶乳橡胶  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD ESA-M2D69-A-2009 RUBBER NEOPRENE LATEX - COATING - OIL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《有涂层的抗油氯丁胶乳橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD ESA-M2E78-B-2003 FIBERBOARD (HOMOGENOUS) - HIGH DENSITY  TO BE USED WITH FORD WSS-M99P1111-A  《高密度纤维板(均质)  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD ESA-M2E78-B-2003 FIBERBOARD (HOMOGENOUS) - HIGH DENSITY TO BE USED WITH FORD WSS-M99P1111-A 《高密度纤维板(均质) 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD ESA-M2G146-A-2014 ADHESIVE THERMOSETTING - FOR FRICTION MATERIALS  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD ESA-M2G146-A-2014 ADHESIVE THERMOSETTING - FOR FRICTION MATERIALS TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD ESA-M2G146-B-2014 ADHESIVE THERMOSETTING - FOR FRICTION MATERIALS  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD ESA-M2G146-B-2014 ADHESIVE THERMOSETTING - FOR FRICTION MATERIALS TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD ESA-M2G200-A-2003 ADHESIVE EPOXY - MICROENCAPSULATED  TO BE USED WITH FORD WSS-M99P1111-A  《把环氧基树脂胶粘剂装入微型胶囊  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD ESA-M2G200-A-2003 ADHESIVE EPOXY - MICROENCAPSULATED TO BE USED WITH FORD WSS-M99P1111-A 《把环氧基树脂胶粘剂装入微型胶囊 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD ESA-M2G221-A-2014 ADHESIVE - POLYESTER EPOXY MODIFIED  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD ESA-M2G221-A-2014 ADHESIVE - POLYESTER EPOXY MODIFIED TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD ESA-M2P109-A-2006 PAINT QUALITY COLOR AND CLEAR COATING - EXTERIOR PARTS  TO BE USED WITH FORD WSS-M99P1111-A  《汽车外部部件用彩色和透明涂层油漆质量  与标准FORD WSS-M99P1111-A一起使用  使用WSS-M2P109-B》.pdf FORD ESA-M2P109-A-2006 PAINT QUALITY COLOR AND CLEAR COATING - EXTERIOR PARTS TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部部件用彩色和透明涂层油漆质量 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M2P109-B》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1