ITU-R BT 1198-1995 Stereoscopic Television Based on R-and L-Eye Two Channel Signals《基于左、右眼两个信道信号的立体视觉电视》.pdf

上传人:syndromehi216 文档编号:790511 上传时间:2019-02-02 格式:PDF 页数:1 大小:50.86KB
下载 相关 举报
ITU-R BT 1198-1995 Stereoscopic Television Based on R-and L-Eye Two Channel Signals《基于左、右眼两个信道信号的立体视觉电视》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、ITU-R RECflNrBT. SERIES 95 = 4855232 0525233 809 Rw. ITU-R BT.1198 125 RECOMMENDATION ITU-R BT.1198 STEREOSCOPIC TELEVISION BASED ON R-AND L-EYE TWO CHANNEL SIGNALS (Question ITU-R 48/11) (1995) The ITU Radiocommunication Assembly, considering that the principles and problems of stereoscopic transmi

2、ssion have been known for many years; that a stereoscopic system would be very attractive for the consumer: that the development of flat panel autostereoscopic display has made significant progress in recent years; that broadcasting could be on the threshold of the development and introduction of di

3、gital television a) b) c) d) broadcasting, recommends that a stereoscopic broadcasting system based on R- and L-eye two signals should: be a system which does not cause significant problems such as eye-fatigue or “puppet theatre” effect to users keep maximally compatible with the monoscopic TV broad

4、casting systems including systems being developed provide a signal which can also be used for monoscopic display; provide a monoscopic signal which is in the same quality range as, or is higher than, current SDTV systems; allow a digital coding scheme which encodes R-eye and L-eye signals separately

5、 either of which can be used allow a digital coding system which involves one full channel plus a disparity signal of much lower bit rate*, 1 relative to monoscopic TV systems*: 2 in Radiocommunication Study Group 11 and Telecommunication Standardization Study Group 9; 3 4 5 for a monoscopic recept

6、ion; 6 providing a quality effectively indistinguishable from Q 5 above, at viewing distances appropriate to the quality target. * To be studied, see Question ITU-R 23411 1. To be studied, see Question -R 235/11. * COPYRIGHT International Telecommunications Union/ITU RadiocommunicationsLicensed by Information Handling Services

展开阅读全文
相关资源
猜你喜欢
  • ASTM D7961-2015 4062 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure《温度和压力范围广泛的U型管密度单元格的标准实施规程》.pdf ASTM D7961-2015 4062 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure《温度和压力范围广泛的U型管密度单元格的标准实施规程》.pdf
  • ASTM D7961-2017 4759 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure《在较大温度和压力范围内校正U形管密度细胞的标准实施规程》.pdf ASTM D7961-2017 4759 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure《在较大温度和压力范围内校正U形管密度细胞的标准实施规程》.pdf
  • ASTM D7962-2015 8821 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift《测定温度传感器最小浸入深度以及评估测得漂移的标准实践规程》.pdf ASTM D7962-2015 8821 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift《测定温度传感器最小浸入深度以及评估测得漂移的标准实践规程》.pdf
  • ASTM D7962-2015a red 2262 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift《测定温度传感器最小浸入深度以及评估测得漂移的标准实施规程》.pdf ASTM D7962-2015a red 2262 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift《测定温度传感器最小浸入深度以及评估测得漂移的标准实施规程》.pdf
  • ASTM D7962-2016 1698 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift《测定最小浸入深度和评估温度传感器测量漂移的标准实施规程》.pdf ASTM D7962-2016 1698 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift《测定最小浸入深度和评估温度传感器测量漂移的标准实施规程》.pdf
  • ASTM D7962-2017 red 9375 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift《测定温度传感器最小浸入深度以及评估测得漂移的标准实施规程》.pdf ASTM D7962-2017 red 9375 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift《测定温度传感器最小浸入深度以及评估测得漂移的标准实施规程》.pdf
  • ASTM D7963-2014 9617 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourie.pdf ASTM D7963-2014 9617 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourie.pdf
  • ASTM D7964 D7964M-2014 9065 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed《测定流化床中流化催化裂化 (FCC) 催化剂活性的标准试验方法》.pdf ASTM D7964 D7964M-2014 9065 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed《测定流化床中流化催化裂化 (FCC) 催化剂活性的标准试验方法》.pdf
  • ASTM D7966 D7966M-2014 7030 Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《采用压缩负荷的静剪切胶粘剂抗蠕变的标准试验方法 (木材对木材)》.pdf ASTM D7966 D7966M-2014 7030 Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《采用压缩负荷的静剪切胶粘剂抗蠕变的标准试验方法 (木材对木材)》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1