ITU-R F 1242-1997 Radio-Frequency Channel Arrangements for Digital Radio Systems Operating in the Range 1 350 MHz to 1 530 MHz《运行于1350-1530MHz频段内数字无线系统的无线频率信道配置》.pdf

上传人:deputyduring120 文档编号:790972 上传时间:2019-02-02 格式:PDF 页数:4 大小:20.44KB
下载 相关 举报
ITU-R F 1242-1997 Radio-Frequency Channel Arrangements for Digital Radio Systems Operating in the Range 1 350 MHz to 1 530 MHz《运行于1350-1530MHz频段内数字无线系统的无线频率信道配置》.pdf_第1页
第1页 / 共4页
ITU-R F 1242-1997 Radio-Frequency Channel Arrangements for Digital Radio Systems Operating in the Range 1 350 MHz to 1 530 MHz《运行于1350-1530MHz频段内数字无线系统的无线频率信道配置》.pdf_第2页
第2页 / 共4页
ITU-R F 1242-1997 Radio-Frequency Channel Arrangements for Digital Radio Systems Operating in the Range 1 350 MHz to 1 530 MHz《运行于1350-1530MHz频段内数字无线系统的无线频率信道配置》.pdf_第3页
第3页 / 共4页
ITU-R F 1242-1997 Radio-Frequency Channel Arrangements for Digital Radio Systems Operating in the Range 1 350 MHz to 1 530 MHz《运行于1350-1530MHz频段内数字无线系统的无线频率信道配置》.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Rec. ITU-R F.1242 1RECOMMENDATION ITU-R F.1242RADIO-FREQUENCY CHANNEL ARRANGEMENTS FOR DIGITAL RADIOSYSTEMS OPERATING IN THE RANGE 1 350 MHz TO 1 530 MHz(Question ITU-R 136/9)(1997)Rec. ITU-R F.1242The ITU Radiocommunication Assembly,consideringa) that as a result of the World Administrative Radio C

2、onference for Dealing with Frequency Allocations inCertain Parts of the Spectrum (Malaga-Torremolinos, 1992) (WARC-92) many administrations may wish to plan fixedservice systems around the bands designated for new mobile, mobile-satellite and broadcast-satellite services;b) that it is sometimes desi

3、rable to be able to interconnect low and medium capacity digital radio systems oninternational circuits using radio frequencies in the 1.5 GHz band;c) that many interfering effects can be substantially reduced by a carefully planned arrangement of the radiofrequencies in radio systems employing seve

4、ral radio-frequency channels;d) that sharing between the fixed service (FS) and mobile service (MS), mobile-satellite service (MSS) orbroadcasting-satellite service (BSS) may be possible by using adequate geographical and/or frequency separation;e) that administrations may have different requirement

5、s for sharing spectrum with the FS, and they may notrequire all the spectrum allocated to MS, MSS or BSS;f) that in Region 1, the band 1 350-1 400 MHz is allocated to the FS,recommends1 that where the introduction of new MS, MSS and/or BSS limits the FS to the band 1 350 to 1 375 MHz pairedwith 1 49

6、2 to 1 517 MHz, a radio-frequency channel arrangement with up to twelve go and return channels is used(carrier spacing of 2 MHz), which is derived as follows:Let f0be the band centre frequency of 1 433.5 MHz,fnbe the centre frequency of a radio-frequency channel in the lower half of the band,fnbe th

7、e centre frequency of a radio-frequency channel in the upper half of the band,DS (Tx/Rx duplex spacing) = 142 MHz,then the frequencies of individual channels with a carrier spacing of 2 MHz are expressed by the following relationships:lower half of band: fn= f0 84 + 2 n MHzupper half of band: fn= f0

8、 58 + 2 n MHzwhere n = 1, 2, 3, . 12.For lower spacings, the frequencies of individual channels are expressed by the following relationships:Carrier spacing of 1 MHz:lower half of band: fn= f0 83.5 + 1 n MHzupper half of band: fn= f0+ 58.5 + 1 n MHz2 Rec. ITU-R F.1242where n = 1, 2, 3, . 24.Carrier

9、 spacing of 0.5 MHz:lower half of band: fn= f0 83.25 + 0.5 n MHzupper half of band: fn= f0+ 58.75 + 0.5 n MHzwhere n = 1, 2, 3, . 48.Carrier spacing of 0.25 MHz:lower half of band: fn= f0 83.125 + 0.25 n MHzupper half of band: fn= f0+ 58.875 + 0.25 n MHzwhere n = 1, 2, 3, . 96.Channel arrangements w

10、ith lower carrier spacings are possible by means of further channel subdivision.Channel arrangements with carrier spacing of 3.5 MHz are possible by means of concatenation of the 0.5 MHz plan. Thefrequencies of individual channels are expressed by the following relationship:lower half of band: fn= f

11、0 83.25 + 3.5 n MHzupper half of band: fn= f0+ 58.75 + 3.5 n MHzwhere n = 1, 2, 3 . 6;2 that where the introduction of new MS, MSS and/or BSS limits the FS to the band 1 375 to 1 400 MHz paired with1 427 to 1 452 MHz, a radio-frequency channel arrangement with up to twelve go and return channels is

12、used(carrier spacing of 2 MHz), which is derived as follows:Let f0be the band centre frequency of 1 413.5 MHz,fnbe the centre frequency of a radio-frequency channel in the lower half of the band,fnbe the centre frequency of a radio-frequency channel in the upper half of the band,DS (Tx/Rx duplex spa

13、cing) = 52 MHz,then the frequencies of individual channels with a carrier spacing of 2 MHz are expressed by the following relationships:lower half of band: fn= f0 39 + 2 n MHzupper half of band: fn= f0+ 13 + 2 n MHzwhere n = 1, 2, 3, . 12.For lower carrier spacings, the frequencies of individual cha

14、nnels are expressed by the following relationships:Carrier spacing of 1 MHz:lower half of band: fn= f0 38.5 + 1 n MHzupper half of band: fn= f0+ 13.5 + 1 n MHzwhere n = 1, 2, 3, . 24.Carrier spacing of 0.5 MHz:lower half of band: fn= f0 38.25 + 0.5 n MHzupper half of band: fn= f0+ 13.75 + 0.5 n MHzw

15、here n = 1, 2, 3, . 48.Rec. ITU-R F.1242 3Carrier spacing of 0.25 MHz:lower half of band: fn= f0 38.125 + 0.25 n MHzupper half of band: fn= f0+ 13.875 + 0.25 n MHzwhere n = 1, 2, 3, . 96.Channel arrangements with lower carrier spacings are possible by means of further channel subdivision.Channel arr

16、angements with carrier spacing of 3.5 MHz are possible by means of concatenation of the 0.5 MHz plan. Thefrequencies of individual channels are expressed by the following relationship:lower half of band: fn= f0 38.25 + 3.5 n MHzupper half of band: fn= f0+ 13.75 + 3.5 n MHzwhere n = 1, 2, 3, . 6;3 th

17、at where the band 1 350-1 400 MHz is not available for the FS and where the introduction of new MS, MSSand/or BSS limits the FS to the band 1 427-1 452 MHz paired with the band 1 492-1 517 MHz(Note 1), a radio-frequency channel arrangement with up to twelve go and return channels is used (carrier sp

18、acing of 2 MHz), which isderived as follows:Let f0be the band centre frequency of 1 472 MHz,fnbe the centre frequency of a radio-frequency channel in the lower half of the band,fnbe the centre frequency of a radio-frequency channel in the upper half of the band,DS (Tx/Rx duplex spacing) = 65 MHz,the

19、n the frequencies of individual channels with a carrier spacing of 2 MHz are expressed by the following relationships:lower half of band: fn= f0 45.5 + 2 n MHzupper half of band: fn= f0+ 19.5 + 2 n MHzwhere n = 1, 2, 3, . 12.For lower carrier spacings, the frequencies of individual channels are expr

20、essed by the following relationships:Carrier spacing of 1 MHz:lower half of band: fn= f0 45 + 1 n MHzupper half of band: fn= f0+ 20 + 1 n MHzwhere n = 1, 2, 3, . 24.Carrier spacing of 0.5 MHz:lower half of band: fn= f0 44.75 + 0.5 n MHzupper half of band: fn= f0+ 20.25 + 0.5 n MHzwhere n = 1, 2, 3,

21、 48.Carrier spacing of 0.25 MHz:lower half of band: fn= f0 44.625 + 0.25 n MHzupper half of band: fn= f0+ 20.375 + 0.25 n MHzwhere n = 1, 2, 3, . 96.4 Rec. ITU-R F.1242Channel arrangements with lower carrier spacings are possible by means of further channel subdivision.A radio-frequency channel arr

22、angement with carrier spacing of 3.5 MHz can be accommodated with up to seven go andreturn channels, the frequencies of individual channels being expressed by the following relationships:lower half of band: fn= f0 46.5 + 3.5 n MHzupper half of band: fn= f0+ 18.5 + 3.5 n MHzwhere n = 1, 2, 3, . 7.NOT

23、E 1 Prior to WARC-92, the band 1 427 to 1 530 MHz has been reported to be used for small capacity analogueand digital systems with a radio-frequency channel arrangement based on a carrier spacing of 0.5 MHz. The frequenciesof individual channels are expressed by the following relationships:lower half of band: fn= f0 51.5 + 0.5 n MHzupper half of band: fn= f0+ 14 + 0.5 n MHzwhere:f0= 1 478.5 MHzn = 1, 2, 3, 74._

展开阅读全文
相关资源
猜你喜欢
  • GOST IEC 61188-5-3-2013 Printed boards and printed board assemblies Design and use Part 5-3 Attachment (land joint) considerations Components with gull-wing leads on two sides《印制板和.pdf GOST IEC 61188-5-3-2013 Printed boards and printed board assemblies Design and use Part 5-3 Attachment (land joint) considerations Components with gull-wing leads on two sides《印制板和.pdf
  • GOST IEC 61188-5-4-2013 Printed boards and printed board assemblies Design and use Part 5-4 Attachment (land joint) considerations Components with J leads on two sides《印制板和印制板组件 设计.pdf GOST IEC 61188-5-4-2013 Printed boards and printed board assemblies Design and use Part 5-4 Attachment (land joint) considerations Components with J leads on two sides《印制板和印制板组件 设计.pdf
  • GOST IEC 61188-5-5-2013 Printed boards and printed board assemblies Design and use Part 5-5 Attachment (land joint) considerations Components with gull-wing leads on four sides《印制板.pdf GOST IEC 61188-5-5-2013 Printed boards and printed board assemblies Design and use Part 5-5 Attachment (land joint) considerations Components with gull-wing leads on four sides《印制板.pdf
  • GOST IEC 61188-5-6-2013 Printed boards and printed board assemblies Design and use Part 5-6 Attachment (land joint) considerations Chip carriers with J-leads on four sides《印制板和印制板组.pdf GOST IEC 61188-5-6-2013 Printed boards and printed board assemblies Design and use Part 5-6 Attachment (land joint) considerations Chip carriers with J-leads on four sides《印制板和印制板组.pdf
  • GOST IEC 61188-5-8-2013 Printed boards and printed board assemblies Design and use Part 5-8 Attachment (land joint) considerations Area array components (BGA FBGA CGA LGA)《印制板和印制板组.pdf GOST IEC 61188-5-8-2013 Printed boards and printed board assemblies Design and use Part 5-8 Attachment (land joint) considerations Area array components (BGA FBGA CGA LGA)《印制板和印制板组.pdf
  • GOST IEC 61189-3-2013 Test methods for electrical materials printed boards and other interconnection structures and assemblies Part 3 Test methods for interconnection structures (p.pdf GOST IEC 61189-3-2013 Test methods for electrical materials printed boards and other interconnection structures and assemblies Part 3 Test methods for interconnection structures (p.pdf
  • GOST IEC 61195-2012 Double-capped fluorescent lamps Safety specifications《双管座的荧光灯 安全性规范》.pdf GOST IEC 61195-2012 Double-capped fluorescent lamps Safety specifications《双管座的荧光灯 安全性规范》.pdf
  • GOST IEC 61199-2011 Single-capped fluorescent lamps Safety specifications《单头荧光灯 安全性规范》.pdf GOST IEC 61199-2011 Single-capped fluorescent lamps Safety specifications《单头荧光灯 安全性规范》.pdf
  • GOST IEC 61210-2011 Connecting devices Flat quick-connect terminations for electrical copper conductors Safety requirements《连接装置 铜导线用快接扁端子 安全性要求》.pdf GOST IEC 61210-2011 Connecting devices Flat quick-connect terminations for electrical copper conductors Safety requirements《连接装置 铜导线用快接扁端子 安全性要求》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1