ITU-R INFORME BS 944 SPANISH-1982 THEORETICAL NETWORK PLANNING《理论网络规划》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 27299-1987 Semiconductor optoelectronic devices Terms definitions and letter symbols of parameters《半导体光电子器体 术语、定义和参数的字母代号》.pdf

GOST 27300-1987 Information measuring systems General requirements complete set and rules of operation documentation composition《信息-测量系统 编写使用文件的一般要求、成套性及规则》.pdf

GOST 27301-1987 Carbide indexablle cutting inserts with rounded corner with one-sided toroidal fixing hole Design and dimensions《可转位的顶端带圆角一边有孔的多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 27302-1987 Carbide indexable cutting inserts with chamfered corner without fixing hole Design and dimensions《可转位的顶端倒棱无孔的多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 27303-1987 Steam and hot water boilers Regulations of acceptance after the mounting《蒸汽和热水锅炉 定装验收规则》.pdf

GOST 27304-1987 Machines with numerical control Adjustable arbours for face-and-side millind cutters Basic dimensions and techical requirements《数控金属切削机床 盘铣刀用可换刀杆 基本尺寸和技术要求》.pdf

GOST 27306-1987 Programmators for household electrical washing machines and dishwashers General specification《家用电动洗衣机和器皿洗涤机用程序 一般技术条件》.pdf

GOST 27307-2013 Explosion-proof mine low-voltage complete control devices to 1140 V Technical requirements and test methods《达到1140 V的防爆矿用低压成套控制设备 技术要求和试验方法》.pdf

GOST 27308-1987 Manganese ores concentrates and agglomerates Method for determination of lead《锰矿、精矿和烧结矿 铅含量测定法》.pdf