ITU-R INFORME BT 1209 SPANISH-1990 Measures for the avoidance of possible interference generated by digital television studio equipment《避免数字电话可能产生的干扰的措施》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M2G299-B8-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 60 - 70 DEGREE C HEAT CURING LONG TERM FLEXIBLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M2G29.pdf

FORD WSS-M2G299-B8-2016 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 60 - 70 HEAT CURING LONG TERM FLEXIBLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M2G299-B1).pdf

FORD WSS-M2G300-A2-2003 ADHESIVE EPOXY ONE COMPONENT INDUCTION HEAT RESPONSIVE STRUCTURAL BONDLINE SPACERS TO BE USED WITH FORD WSS-M99P1111-A 《粘结层隔离块用感应热相应的结构用单组分环氧树脂胶粘剂 与标准FOR.pdf

FORD WSS-M2G314-B2-2013 PRIMER GLASS MOISTURE CURE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2G316-B2-2007 ADHESIVE MOISTURE CURING URETHANE ONE COMPONENT PRIMERLESS TO SILANE BASED CLEARCOAT PAINT DIRECT FIRED OVENS ONLY TO BE USED WITH FORD WSS-M99P1111-A 《用于.pdf

FORD WSS-M2G316-B4-2008 ADHESIVE MOISTURE CURING URETHANE ONE COMPONENT PRIMERLESS CLEARCOAT INCREASED UV-STABILITY TO BE USED WITH FORD WSS-M99P1111-A 《高紫外线稳定性的无底漆透明涂层用单组分湿固化氨基甲.pdf

FORD WSS-M2G316-B5-2011 ADHESIVE MOISTURE CURING URETHANE ONE COMPONENT PRIMERLESS CLEARCOAT PAINT STANDARD FIX PUMPABLE AMBIENT APPLIED TO BE USED WITH FORD WSS-M99P1111-A 《单组分无.pdf

FORD WSS-M2G316-B5-2017 ADHESIVE MOISTURE CURING URETHANE ONE COMPONENT PRIMERLESS CLEARCOAT PAINT STANDARD FIX PUMPABLE AMBIENT APPLIED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2G316-B6-2013 ADHESIVE POLYURETHANE ONE COMPONENT HIGH SHEAR MODULUS FAST FIX LOW-CONDUCTIVE AMBIENT PUMPABLE WARM APPLIED TO BE USED WITH FORD WSS-M99P1111-A .pdf