ITU-R M 1173-1-2012 Technical characteristics of single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606 5 kHz (1 605 kHz Regd 27.pdf

上传人:priceawful190 文档编号:791610 上传时间:2019-02-02 格式:PDF 页数:4 大小:1.27MB
下载 相关 举报
ITU-R M 1173-1-2012 Technical characteristics of single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606 5 kHz (1 605 kHz Regd 27.pdf_第1页
第1页 / 共4页
ITU-R M 1173-1-2012 Technical characteristics of single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606 5 kHz (1 605 kHz Regd 27.pdf_第2页
第2页 / 共4页
ITU-R M 1173-1-2012 Technical characteristics of single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606 5 kHz (1 605 kHz Regd 27.pdf_第3页
第3页 / 共4页
ITU-R M 1173-1-2012 Technical characteristics of single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606 5 kHz (1 605 kHz Regd 27.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 Recommendation ITU-R M.1173-1(03/2012)Technical characteristics of single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606.5 kHz (1 605 kHz Region 2) and 4 000 kHz and between 4 000 kHz and 27 500 kHzM SeriesMobile, radiodetermination, amateura

2、nd related satellite servicesii Rec. ITU-R M.1173-1 Foreword The role of the Radiocommunication Sector is to ensure the rational, equitable, efficient and economical use of the radio-frequency spectrum by all radiocommunication services, including satellite services, and carry out studies without li

3、mit of frequency range on the basis of which Recommendations are adopted. The regulatory and policy functions of the Radiocommunication Sector are performed by World and Regional Radiocommunication Conferences and Radiocommunication Assemblies supported by Study Groups. Policy on Intellectual Proper

4、ty Right (IPR) ITU-R policy on IPR is described in the Common Patent Policy for ITU-T/ITU-R/ISO/IEC referenced in Annex 1 of Resolution ITU-R 1. Forms to be used for the submission of patent statements and licensing declarations by patent holders are available from http:/www.itu.int/ITU-R/go/patents

5、/en where the Guidelines for Implementation of the Common Patent Policy for ITU-T/ITU-R/ISO/IEC and the ITU-R patent information database can also be found. Series of ITU-R Recommendations (Also available online at http:/www.itu.int/publ/R-REC/en) Series Title BO Satellite delivery BR Recording for

6、production, archival and play-out; film for television BS Broadcasting service (sound) BT Broadcasting service (television) F Fixed service M Mobile, radiodetermination, amateur and related satellite services P Radiowave propagation RA Radio astronomy RS Remote sensing systems S Fixed-satellite serv

7、ice SA Space applications and meteorology SF Frequency sharing and coordination between fixed-satellite and fixed service systems SM Spectrum management SNG Satellite news gathering TF Time signals and frequency standards emissions V Vocabulary and related subjects Note: This ITU-R Recommendation wa

8、s approved in English under the procedure detailed in Resolution ITU-R 1. Electronic Publication Geneva, 2012 ITU 2012 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without written permission of ITU. Rec. ITU-R M.1173-1 1 RECOMMENDATION ITU-R M.1173-1*T

9、echnical characteristics of single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606.5 kHz (1 605 kHz Region 2) and 4 000 kHz and between 4 000 kHz and 27 500 kHz (1995-2012) Scope This Recommendation provides the technical characteristics for si

10、ngle sideband transmitters used in the MF/HF maritime mobile service bands. The ITU Radiocommunication Assembly, considering a) that there is a need to describe the technical characteristics of single-sideband transmitters for the bands 1 606.5 kHz (1 605 kHz Region 2) to 4 000 kHz and 4 000 kHz to

11、27 500 kHz, recommends 1 that single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606.5 kHz (1 605 kHz Region 2) and 4 000 kHz and between 4 000 kHz and 27 500 kHz should be designed to meet the technical characteristics shown in Annex 1. Annex

12、1 Technical characteristics of single-sideband transmitters used in the maritime mobile service for radiotelephony in the bands between 1 606.5 kHz (1 605 kHz Region 2) and 4 000 kHz and between 4 000 kHz and 27 500 kHz 1 Power of the carrier: For class J3E emissions the power of the carrier shall b

13、e at least 40 dB below the peak envelope power. 2 Coast and ship stations shall use only the upper sideband. 3 The transmitter audio-frequency band shall be 350 Hz to 2 700 Hz with a permitted amplitude variation of 6 dB. 4 The carrier frequencies shall be maintained within the tolerances specified

14、in Appendix 2 to the Radio Regulations. *This Recommendation should be brought to the attention of the International Maritime Organization (IMO), the International Electrotechnical Commission (IEC) and the Comit International Radio Maritime (CIRM). 2 Rec. ITU-R M.1173-1 5 The unwanted frequency modu

15、lation of the carrier shall be sufficiently low to prevent harmful distortion. 6 When class H3E or J3E emissions are used, the power of any unwanted emission supplied to the antenna transmission line on any discrete frequency shall, when the transmitter is driven to full peak envelope power, be in a

16、ccordance with the following table: Separation between the frequency of the unwanted emission and the assigned frequency (kHz) Minimum attenuation below peak envelope power 1.5 4.5 31 dB 4.5 7.5 38 dB 7.5 43 dB without the unwanted emission power exceeding the power of 50 mW Transmitters using suppr

17、essed carrier emission may, as far as concerns out-of-band emissions and those spurious emissions which are a result of the modulation process but do not fall in the spectrum of out-of-band emissions, be tested for compliance with this regulation by means of a two-tone-audio input signal with a frequency separation between the tones such that all intermodulation products occur at frequencies at least 1.5 kHz removed from the assigned frequency.

展开阅读全文
相关资源
猜你喜欢
  • GOST 31412-2010 Seaweeds sea grasses and products of their processing Methods of identification of sensory and physical characteristics《海藻 海草及其加工产品 物理和感官特性的鉴定方法》.pdf GOST 31412-2010 Seaweeds sea grasses and products of their processing Methods of identification of sensory and physical characteristics《海藻 海草及其加工产品 物理和感官特性的鉴定方法》.pdf
  • GOST 31413-2010 Seaweeds sea grasses and products of their processing Acceptance rules and sampling methods《海藻 海草及其加工产品 验收法则和取样方法》.pdf GOST 31413-2010 Seaweeds sea grasses and products of their processing Acceptance rules and sampling methods《海藻 海草及其加工产品 验收法则和取样方法》.pdf
  • GOST 31416-2009 Chrysotile cement pipes and couplings Specifications《温石棉水泥管道及联轴器 规范》.pdf GOST 31416-2009 Chrysotile cement pipes and couplings Specifications《温石棉水泥管道及联轴器 规范》.pdf
  • GOST 31418-2010 Environmental dynamic test methods for machines instrument and other technical articles Shock tests with shock response spectrum synthesis《机械 仪器仪表及其他技术文献的环境动态测试 使用冲.pdf GOST 31418-2010 Environmental dynamic test methods for machines instrument and other technical articles Shock tests with shock response spectrum synthesis《机械 仪器仪表及其他技术文献的环境动态测试 使用冲.pdf
  • GOST 31419-2010 Environmental dynamic test methods for machines instruments and other technical articles Mixed mode vibration tests《机械 仪器及其他物品的环境动态试验方法 混合式振动试验》.pdf GOST 31419-2010 Environmental dynamic test methods for machines instruments and other technical articles Mixed mode vibration tests《机械 仪器及其他物品的环境动态试验方法 混合式振动试验》.pdf
  • GOST 31420-2010 Noise of machines Reciprocating internal combustion engine driven alternating current generating sets Measurement of airborne noise by the enveloping surface method.pdf GOST 31420-2010 Noise of machines Reciprocating internal combustion engine driven alternating current generating sets Measurement of airborne noise by the enveloping surface method.pdf
  • GOST 31421-2010 Vibration Testing of mobile machinery in order to determine the vibration emission value Industrial trucks《机械振动 为确定振动辐射值的移动式机械测试 工业卡车》.pdf GOST 31421-2010 Vibration Testing of mobile machinery in order to determine the vibration emission value Industrial trucks《机械振动 为确定振动辐射值的移动式机械测试 工业卡车》.pdf
  • GOST 31422-2010 Knitted outerwear for children Norms of physicohygienic indices《儿童针织外衣 物理卫生指标规范》.pdf GOST 31422-2010 Knitted outerwear for children Norms of physicohygienic indices《儿童针织外衣 物理卫生指标规范》.pdf
  • GOST 31423-2010 Knitted garments Method of determining the change in linear dimensions after wet treatment《针织服装 湿处理后线性尺寸的变化确定方法》.pdf GOST 31423-2010 Knitted garments Method of determining the change in linear dimensions after wet treatment《针织服装 湿处理后线性尺寸的变化确定方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1