ITU-R M 1639-1-2005 Protection criterion for the aeronautical radionavigation service with respect to aggregate emissions from space stations in the radionavigation-satellite servi .pdf

上传人:outsidejudge265 文档编号:791830 上传时间:2019-02-02 格式:PDF 页数:6 大小:170.16KB
下载 相关 举报
ITU-R M 1639-1-2005 Protection criterion for the aeronautical radionavigation service with respect to aggregate emissions from space stations in the radionavigation-satellite servi .pdf_第1页
第1页 / 共6页
ITU-R M 1639-1-2005 Protection criterion for the aeronautical radionavigation service with respect to aggregate emissions from space stations in the radionavigation-satellite servi .pdf_第2页
第2页 / 共6页
ITU-R M 1639-1-2005 Protection criterion for the aeronautical radionavigation service with respect to aggregate emissions from space stations in the radionavigation-satellite servi .pdf_第3页
第3页 / 共6页
ITU-R M 1639-1-2005 Protection criterion for the aeronautical radionavigation service with respect to aggregate emissions from space stations in the radionavigation-satellite servi .pdf_第4页
第4页 / 共6页
ITU-R M 1639-1-2005 Protection criterion for the aeronautical radionavigation service with respect to aggregate emissions from space stations in the radionavigation-satellite servi .pdf_第5页
第5页 / 共6页
点击查看更多>>
资源描述

1、 Rec. ITU-R M.1639-1 1 RECOMMENDATION ITU-R M.1639-1*Protection criterion for the aeronautical radionavigation service with respect to aggregate emissions from space stations in the radionavigation-satellite service in the band 1 164-1 215 MHz (2003-2005) Scope This Recommendation gives the equivale

2、nt power flux-density (epfd) level which protects stations of the aeronautical radionavigation service (ARNS) from emissions of radionavigation satellites of all radionavigation-satellite service (RNSS) systems operating in the 1 164-1 215 MHz band. The ITU Radiocommunication Assembly, considering a

3、) that in accordance with the Radio Regulations (RR), the band 960-1 215 MHz is allocated on a primary basis to the aeronautical radionavigation service (ARNS) in all the ITU Regions; b) that analyses show that radionavigation-satellite service (RNSS) signals in the 1 164-1 215 MHz band can be desig

4、ned to not cause interference to the distance measuring equipment (DME)/tactical air navigation (TACAN) ARNS receivers operating in this band; c) that the equivalent power flux-density (epfd) method assesses interference from multiple RNSS space stations into ARNS receivers more accurately than the

5、aggregate pfd method; d) that the signal paths of the planned RNSS (space-to-space and space-to-Earth) signals in the 1 164-1 215 MHz band will originate from the same transmission from the RNSS satellites, and thus RNSS (space-to-space) service on such systems will not increase the epfd level above

6、 that of RNSS (space-to-Earth) service; e) that there are no known plans for any RNSS systems providing exclusively RNSS (space-to-space) service in the 1 164-1 215 MHz band, and the likelihood of such systems being developed in the future is considered to be very low; f) that Recommendation ITU-R M

7、.1642 contains the methodology and the reference ARNS station characteristics to be used to calculate the aggregate epfd produced by emissions from all the space stations of all radionavigation-satellite systems at any aeronautical radionavigation station, recognizing a) that WRC-2000 introduced a c

8、o-primary allocation for the RNSS in the frequency band 1 164-1 215 MHz, subject to conditions that require the RNSS to protect the ARNS from harmful interference; b) that WRC-03 determined that protection of the ARNS from RNSS can be achieved if the value of the epfd produced by all the space stati

9、ons of all RNSS (space-to-Earth) systems in the band 1 164-1 215 MHz does not exceed the level of 121.5 dB (W/m2) in any 1 MHz band, and adopted Resolution 609 (WRC-03) in order to ensure that this level is not exceeded; *This Recommendation should be brought to the attention of the International Ci

10、vil Aviation Organization (ICAO). 2 Rec. ITU-R M.1639-1 c) that the ARNS is a safety service in accordance with RR No. 1.59 and special measures need to be taken by administrations to protect these services from harmful interference in accordance with RR No. 4.10. recommends 1 that the maximum allow

11、able epfd level from all space stations of all RNSS systems should not exceed 121.5 dB(W/(m2 MHz) as derived in Annex 1, in order to protect the ARNS in the band 1 164-1 215 MHz. Annex 1 Aggregate protection criterion determination This Annex addresses epfd level for all space-based RNSS emissions i

12、n the band 1 164-1 215 MHz, whether space-to-Earth or space-to-space RNSS, which protects the ARNS. 1 Definition of epfd The definition is based upon RR No. 22.5C.1 as adopted at WRC-2000. When an antenna receives power, within its reference bandwidth, simultaneously from transmitters at various dis

13、tances, in various directions and at various levels of incident pfd, the epfd is that pfd which, if received from a single transmitter in the far field of the antenna in the direction of maximum gain, would produce the same power at the input of the receiver as is actually received from the aggregat

14、e of the various transmitters. The instantaneous epfd is calculated using the following formula: =a iPNimaxririitGGdGepfd1,)(4)(10log1021010where: Na: number of space stations that are visible from the receiver i : index of the space station considered Pi:RF power at the input of the antenna (or RF

15、radiated power in the case of an active antenna) of the transmitting space station (dB(W/MHz) i:off-axis angle between the boresight of the transmitting space station and the direction of the receiver Gt(i) : transmit antenna gain (as a ratio) of the space station in the direction of the receiver di

16、: distance (m) between the transmitting station and the receiver i: off-axis angle between the pointing direction of the receiver and the direction of the transmitting space station Gr(i) : receive antenna gain (as a ratio) of the receiver, in the direction of the transmitting space station (see Rec

17、ommendation ITU-R M.1642) Gr,max: maximum gain (as a ratio) of the receiver Rec. ITU-R M.1639-1 3 epfd : instantaneous epfd (dB(W/(m2 MHz) at the receiver. NOTE 1 It is assumed that each transmitter is located in the far field of the receiver (that is, at a distance greater than 2D2/, where D is the

18、 effective diameter of the receiver antenna and is the observing wavelength). In the case under consideration this will always be satisfied. 2 Maximum aggregate epfd (all RNSS systems) to protect the ARNS The parameters in Table 1 identify the epfd level at which ARNS equipment will be protected fro

19、m RNSS emissions in the 1 164-1 215 MHz band. TABLE 1 Maximum allowable aggregate epfd level to protect ARNS from RNSS Parameter Value Reference 1 DME RNSS interference threshold (at antenna port) 129 dB(W/MHz) (See Note 1) 2 Maximum DME/TACAN antenna gain including polarization mismatch 3.4 dBi (5.

20、4 dBi antenna gain 2 dB polarization mismatch) 3 Effective area of 0 dBi antenna at 1 176 MHz 22.9 dB(m2) 4 RNSS (all systems) aggregate epfd in 1 MHz 109.5 dB(W/(m2 MHz) Combine 1, 2 and 3 (1 minus 2 minus 3) 5 Safety margin 6 dB Recommendation ITU-R M.1477 6 Apportionment of RNSS interference to a

21、ll the interference sources 6 dB Apportion 25% of total permissible interference to RNSS 7 Maximum RNSS aggregate epfd 121.5 dB(W/(m2 MHz) Combine 4, 5 and 6 (4 minus 5 minus 6) NOTE 1 This value is based on a 129 dBW CW interference threshold specified for international DME systems used by civil av

22、iation. Measurement has demonstrated that an RNSS signal spread over 1 MHz would have the same effect as a CW signal on DME performance (see 2.1). 2.1 Comparison between the impact of CW interference type of signal and RNSS type of interference signal on DME/TACAN on-board receivers 2.1.1 Susceptibi

23、lity of DME receivers from interference by RNSS signals (spread spectrum signals) Ground DME transponder signals of peak value 83 dBm were set as the wanted signal at the different DME interrogator/receivers. The total power of the narrow (see Fig. 1) or wideband (see Fig. 2) interference source was

24、 measured within a bandwidth of 650 kHz, and the variation in performance of a DME between CW signals and the RNSS signals was determined for a number of different DME designs and a number of DMEs of the same type. These DMEs were of the type designed for large commercial aircraft and smaller commer

25、cial aviation aircraft. 4 Rec. ITU-R M.1639-1 The shape of the interference signals used in the tests is given in Figs. 1 and 2. For Fig. 1, the interference source was generated from an RNSS signal simulator that produced the exact signal structure and frequency signal of an existing RNSS system. T

26、his 1.023 Mchip/s pseudo-random code division multiple access (CDMA) transmission was translated in frequency to the relevant DME receive frequency under test. The range of interfering RNSS narrow-band signals (measured in 650 kHz) applied to DMEs was 83 to 94 dBm. 1639-01102030405060708090100110FIG

27、URE 1Example of RNSS narrow-band signal translated to 1 176.45 MHzResolution BW = 100 kHzVideo BW = 100 kHzSweep = 0.05 sAttenuation = 0 dBAverages = 10Power (dBm)Rec. ITU-R M.1639-1 5 For Fig. 2, the interference source was generated from a digital signal generator, that produced a 10.23 Mchip/s ps

28、eudo-random CDMA emission similar to that proposed by the RNSS in the band 1 164-1 215 MHz. The signal was applied directly to the relevant receive DME under test. The range of interfering RNSS wideband signals (measured in 650 kHz) applied to DMEs was 81 to 93 dBm. 1639-02102030405060708090100110FI

29、GURE 2Example of RNSS wideband signalPower (dBm)Resolution BW = 100 kHzVideo BW = 100 kHzSweep = 0.05 sAttenuation = 0 dBAverages = 12.1.2 CW RNSS measurement results Measurement has demonstrated that an RNSS signal spread over 1 MHz would have the same effect as a CW signal on DME performance. Meas

30、urement variation of about 1 dB was noted, as was a performance variation of about 3 dB between the different DMEs. 2.2 Circular polarization isolation achieved by the DME antenna A linear vertically polarized DME antenna should receive 3 dB of the total circularly polarized RNSS signal. However, RN

31、SS emissions are observed in the side lobes, not the main beam of a DME antenna, where polarization mismatch is less certain. Some recent measurements on aircraft DME antennas have indicated a value of 2.5 dB, while other experience of aircraft polarization mismatch has observed factors of 0 dB. It

32、was therefore considered practical to assume a polarization mismatch of 2 dB for RNSS circularly polarized signals to a DME antenna. This value should therefore be added to the effective maximum antenna gain to determine the ARNS receiver maximum antenna gain including polarization mismatch. 6 Rec.

33、ITU-R M.1639-1 2.3 Apportionment of the DME maximum allowable aggregate interference level to RNSS The chosen factor of 6 dB for the apportionment of the maximum allowable aggregate interference level, from all other interference sources to the RNSS maximum allowable aggregate interference level, re

34、cognizes that there exists the possibility of interference from other DME in the same frequency band, from the spurious and out-of-band emissions of other airborne ARNS and aeronautical mobile-satellite service (AMSS) systems and also from the bands adjacent to the ARNS. The on-board ARNS systems in

35、clude multiple secondary surveillance radar transponders, multiple airborne collision avoidance systems and other DME interrogators; on-board satellite terminals in the AMSS also operate. Adjacent band sources of interference are high-powered radiolocation service radar operating just above 1 215 MHz and broadcast service transmitters operating below 960 MHz.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1