ITU-R QUESTION 516-2000 Sky-wave reception in LF MF and HF broadcasting《低频 中频和短波广播中的天波接收》.pdf

上传人:explodesoak291 文档编号:792546 上传时间:2019-02-02 格式:PDF 页数:1 大小:13.27KB
下载 相关 举报
ITU-R QUESTION 516-2000 Sky-wave reception in LF MF and HF broadcasting《低频 中频和短波广播中的天波接收》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、C:DOCUMENTS AND SETTINGSQGV33745MY DOCUMENTSDOWNLOADSR-QUE-SG06.51-2000-MSW-E.DOC 22.10.03 15.07.10 QUESTION ITU-R 51/6*Sky-wave reception in LF, MF and HF broadcasting (1990-1997-2000) The ITU Radiocommunication Assembly, considering a) that broadcasting services at LF, MF and HF are also provided

2、by sky-wave propagation; b) that to plan a satisfactory service via sky-wave propagation, fading allowances are required to be taken into account, decides that the following Question should be studied 1 What is the nature of the distortion due to the effects of the ionosphere at distances beyond the

3、 ground-wave coverage area? 2 What is the degradation of the subjective quality of the sky-wave signal when received beyond the limit of the ground-wave coverage area, according to the system envisaged and as a function of distance and other possible factors, such as the geographical location of the

4、 transmitter, the frequency, the season of the year and the characteristics of the transmitting antenna? 3 What is the degree of distortion for a given percentage of time that would, after demodulation at the receiver, provide satisfactory sky-wave reception? 4 What is the reduction in distortion, d

5、ue to the effects of the ionosphere, that can be secured by improvements in methods of reception, for example, replacing envelope detectors by other detection devices? 5 What performance improvement in terms of the parameters included in decides 1 to 4 above can be expected by the implementation of

6、digital modulation techniques? further decides 1 that the results of the above studies should be addressed to: update existing Recommendation(s); prepare (a) new Recommendation(s); 2 that the above studies should be completed by the year 2005. _ *This Question should be brought to the attention of Radiocommunication Study Group 3.

展开阅读全文
相关资源
猜你喜欢
  • EN ISO 14064-2-2012 en Greenhouse gases - Part 2 Specification with guidance at the project level for quantification monitoring and reporting of greenhouse gas emission reductions .pdf EN ISO 14064-2-2012 en Greenhouse gases - Part 2 Specification with guidance at the project level for quantification monitoring and reporting of greenhouse gas emission reductions .pdf
  • EN ISO 14064-3-2012 en Greenhouse gases - Part 3 Specification with guidance for the validation and verification of greenhouse gas assertions《温室气体 温室气体认定用验证和确认的规范与指南》.pdf EN ISO 14064-3-2012 en Greenhouse gases - Part 3 Specification with guidance for the validation and verification of greenhouse gas assertions《温室气体 温室气体认定用验证和确认的规范与指南》.pdf
  • EN ISO 14065-2013 en Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition《温室气体 温室气体确认与验证机构的认.pdf EN ISO 14065-2013 en Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition《温室气体 温室气体确认与验证机构的认.pdf
  • EN ISO 14087-2011 en Leather - Physical and mechanical tests - Determination of bending force《皮革 物理和机械试验 弯曲力的测定》.pdf EN ISO 14087-2011 en Leather - Physical and mechanical tests - Determination of bending force《皮革 物理和机械试验 弯曲力的测定》.pdf
  • EN ISO 14088-2012 en Leather - Chemical tests - Quantitative analysis of tanning agents by filter method《皮革 化学试验 通过过滤法进行制革剂的量化分析》.pdf EN ISO 14088-2012 en Leather - Chemical tests - Quantitative analysis of tanning agents by filter method《皮革 化学试验 通过过滤法进行制革剂的量化分析》.pdf
  • EN ISO 14111-1999 en Natural Gas - Guidelines to Traceability in Analysis《天然气 分析溯源性准则》.pdf EN ISO 14111-1999 en Natural Gas - Guidelines to Traceability in Analysis《天然气 分析溯源性准则》.pdf
  • EN ISO 14113-2013 en Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)《气焊设备 450 bar(45 MPa)以下工业气体传输用橡胶和塑料软管及.pdf EN ISO 14113-2013 en Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)《气焊设备 450 bar(45 MPa)以下工业气体传输用橡胶和塑料软管及.pdf
  • EN ISO 14114-2014 en Gas welding equipment - Acetylene manifold systems for welding cutting and allied processes - General requirements《气焊设备 焊接 切割和类似工艺的乙炔汇流系统 一般要求(ISO 14114 2014)》.pdf EN ISO 14114-2014 en Gas welding equipment - Acetylene manifold systems for welding cutting and allied processes - General requirements《气焊设备 焊接 切割和类似工艺的乙炔汇流系统 一般要求(ISO 14114 2014)》.pdf
  • EN ISO 14114-2018 en Gas welding equipment - Acetylene manifold systems for welding cutting and allied processes - General requirements.pdf EN ISO 14114-2018 en Gas welding equipment - Acetylene manifold systems for welding cutting and allied processes - General requirements.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1