ITU-R REPORT BS 1071-1986 Sampling frequency conversion and synchronization of digital sound signals《数字声音信号的采样频率转换和同步》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

IS 13630 Pt 6-1993 Ceramic tiles Methods of test Part 6 Determination of modulus of rupture.pdf

IS 13630 Pt 7-1993 Ceramic tiles Methods of test Part 7 Determination of chemical resistance Unglazed tiles.pdf

IS 13630 Pt 8-1993 Ceramic tiles Methods of test Part 8 Determination of chemical resistance Glazed tiles.pdf

IS 13630 Pt 9-1993 Ceramic tiles Methods of test Part 8 Determination of crazing resistance Glazed tiles.pdf

IS 13631-1993 Method of test for detection and determination of antioxidant additives in insulating oils.pdf

IS 13632-1993 Shipbuilding Marine gyro compasses Specification.pdf

IS 13633-1993 Shipbuilding Measurement and reporting of local vibration data of ship structures and equipment Code of practice.pdf

IS 13634-1993 General introduction for milling machines with table of variable height with horizontal or vertical spindle.pdf

IS 13635-1993 Numerical control of machines Symbols.pdf