ITU-R SA 1344-1-2009 Preferred frequency bands and bandwidths for the transmission of space VLBI data within existing space research service (SRS) allocations《空间VLBI数据传输的首选频率波段和带宽》.pdf

上传人:testyield361 文档编号:793809 上传时间:2019-02-02 格式:PDF 页数:2 大小:12.87KB
下载 相关 举报
ITU-R SA 1344-1-2009 Preferred frequency bands and bandwidths for the transmission of space VLBI data within existing space research service (SRS) allocations《空间VLBI数据传输的首选频率波段和带宽》.pdf_第1页
第1页 / 共2页
ITU-R SA 1344-1-2009 Preferred frequency bands and bandwidths for the transmission of space VLBI data within existing space research service (SRS) allocations《空间VLBI数据传输的首选频率波段和带宽》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 Rec. ITU-R SA.1344-1 1 RECOMMENDATION ITU-R SA.1344-1 Preferred frequency bands and bandwidths for the transmission of space VLBI data within existing space research service (SRS) allocations (Question ITU-R 203/7) (1998-2009) Scope This Recommendation provides the preferred frequency bands and ban

2、dwidths for the transmission of science data and time/phase reference signals. The ITU Radiocommunication Assembly, considering a) that the angular resolution of measurements made by very long baseline interferometry (VLBI) techniques improves as the distance between two observing stations increases

3、 b) that, compared to the largest possible distance between two observing stations on Earth, this baseline distance may be substantially increased by locating one or more of the observing stations in space; c) that by conducting VLBI measurements which utilize spacecraft, it is possible to substant

4、ially reduce the errors of ground-based observations caused by the absorption, path length fluctuations and noise contributions by the atmosphere, or eliminate these errors if both VLBI stations are in space; d) that space VLBI can provide data for accurate determination of: radio source structure a

5、nd positions; geodynamic parameters; and deep-space spacecraft navigation; e) that the transmission of wideband space VLBI data from space-to-Earth is required; f) that contemporary space VLBI systems require the transmission of highly accurate time/phase reference signals from Earth-to-space and sp

6、ace-to-Earth; g) that space VLBI systems are an application of the space research service (SRS), 2 Rec. ITU-R SA.1344-1 recommends 1 that preferred frequency bands for transmission of telemetry data and time/phase reference signals in the space-to-Earth direction should be as follows: Frequency band

7、 (GHz) RF bandwidth (MHz) SRS allocation status Direction of transmission in SRS allocation 8.45-8.5(1), (2)0.1 Primary Space-to-Earth 14-14.3 300 Secondary All directions 14.5-15.35 300-500 Secondary All directions 25.5-27 1 000 Primary Space-to-Earth 37-38 1 000 Primary Space-to-Earth74-84 10 000

8、Secondary Space-to-Earth (1)Radioastron will continue to use the frequency 8 400 MHz for phase transfer under existing ITU-R publication API/A/3957. (2)Use for phase transfer only. 2 that preferred frequency bands for the transmission of telecommand data and time/phase reference signals in the Earth-to-space direction should be as follows: Frequency band (GHz) RF bandwidth (MHz) SRS allocation status Direction of transmission in SRS allocation 7.190-7.235 0.1-2 Primary Earth-to-space 15.20-15.35 0.1-2 Secondary All directions 40-40.5 0.1-2 Primary Earth-to-space

展开阅读全文
相关资源
猜你喜欢
  • FORD WSD-M2C904-A-2009 OIL - ENGINE SAE 10W-30 API SG CD INITIAL FILL  TO BE USED WITH FORD WSS-M99P1111-A  《初始注入的SAE 10W-30 API SG CD发动机油  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSD-M2C904-A-2009 OIL - ENGINE SAE 10W-30 API SG CD INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的SAE 10W-30 API SG CD发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSD-M2C904-B-2009 OIL - ENGINE SAE 10W-30 API SG CD CONTROLLED VISCOSITY INITIAL FILL  TO BE USED WITH FORD WSS-M99P1111-A  《初始注入的、粘度控制的SAE 10W-30 API SG CD发动机油  与标准FORD WSS-M.pdf FORD WSD-M2C904-B-2009 OIL - ENGINE SAE 10W-30 API SG CD CONTROLLED VISCOSITY INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的、粘度控制的SAE 10W-30 API SG CD发动机油 与标准FORD WSS-M.pdf
  • FORD WSD-M2D243-A2-2014 POLYURETHANE (PUR) FOAM FLAME BONDABLE  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSD-M2D243-A2-2014 POLYURETHANE (PUR) FOAM FLAME BONDABLE TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WSD-M2D243-A4-2010 POLYURETHANE (PUR) FOAM FLAME BONDABLE  TO BE USED WITH FORD WSS-M99P1111-A  《可火烧粘合的聚氨酯(PUR)泡沫  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSD-M2D243-A4-2010 POLYURETHANE (PUR) FOAM FLAME BONDABLE TO BE USED WITH FORD WSS-M99P1111-A 《可火烧粘合的聚氨酯(PUR)泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSD-M2D243-A5-2010 POLYURETHANE (PUR) FOAM FLAME BONDABLE  TO BE USED WITH FORD WSS-M99P1111-A  《可火烧粘合的聚氨酯(PUR)泡沫  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSD-M2D243-A4上》.pdf FORD WSD-M2D243-A5-2010 POLYURETHANE (PUR) FOAM FLAME BONDABLE TO BE USED WITH FORD WSS-M99P1111-A 《可火烧粘合的聚氨酯(PUR)泡沫 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSD-M2D243-A4上》.pdf
  • FORD WSD-M2D249-A3-2010 TUBING SILICONE RUBBER HIGH TEMPERATURE 70 HARDNESS  TO BE USED WITH FORD WSS-M99P1111-A  《硬度为70的耐高温硅橡胶管件  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSD-M2D249-A3-2010 TUBING SILICONE RUBBER HIGH TEMPERATURE 70 HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度为70的耐高温硅橡胶管件 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSD-M2D363-A2-2004 FLUOROELASTOMER (FKM) HIGH HEAT AND COMPRESSION STRESS RELAXATION RESISTANT  TO BE USED WITH FORD WSS-M99P1111-A  《耐高温和耐压缩应力松弛的氟橡胶(FKM)  与标准FORD WSS-M99P111.pdf FORD WSD-M2D363-A2-2004 FLUOROELASTOMER (FKM) HIGH HEAT AND COMPRESSION STRESS RELAXATION RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐高温和耐压缩应力松弛的氟橡胶(FKM) 与标准FORD WSS-M99P111.pdf
  • FORD WSD-M2D363-A2-2016 FLUOROELASTOMER (FKM) HIGH HEAT AND COMPRESSION STRESS RELAXATION RESISTANT  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSD-M2D363-A2-2016 FLUOROELASTOMER (FKM) HIGH HEAT AND COMPRESSION STRESS RELAXATION RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WSD-M2D369-A-2004 POLYACRYLIC (ACM) RUBBER ENGINE OIL AND HIGH HEAT RESISTANT - LOW COMPRESSION SET STATIC SEAL  TO BE USED WITH FORD WSS-M99P1111-A  《静密封用低压缩永久变形的耐发动机油和高温的聚丙烯.pdf FORD WSD-M2D369-A-2004 POLYACRYLIC (ACM) RUBBER ENGINE OIL AND HIGH HEAT RESISTANT - LOW COMPRESSION SET STATIC SEAL TO BE USED WITH FORD WSS-M99P1111-A 《静密封用低压缩永久变形的耐发动机油和高温的聚丙烯.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1