ITU-R SA 510-2-1997 Feasibility of Frequency Sharing Between the Space Research Service and Other Services in Bands Near 14 and 15 GHz Potential Interference from Data Relay Satell.pdf

上传人:orderah291 文档编号:793870 上传时间:2019-02-02 格式:PDF 页数:1 大小:62.77KB
下载 相关 举报
ITU-R SA 510-2-1997 Feasibility of Frequency Sharing Between the Space Research Service and Other Services in Bands Near 14 and 15 GHz Potential Interference from Data Relay Satell.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Rec ITU-R SA.510-2 131 RECOMMENDATION ITU-R SAS 10-2* FEASIBILITY OF FREQUENCY SHARING BETWEEN THE SPACE RESEARCH SERVICE AND OTHER SERVICES IN BANDS NEAR 14 AND 15 GHz Potential interference from data relay satellite systems (Question ITU-R 1 18n) (1978-1982-1997) The IT Radiocommunication Assembly

2、 considering a) that frequency sharing within the range 13 to 16 GHz between near-Earth space research applications (transmitters of the data relay satellite (DRS) system) and other services, namely the fixed and mobile services and radiolocation service is feasible; b) that, following the provisio

3、ns of the Radio Regulations, the space research service may operate on a secondary basis in some of the bands where the above services are primary; c) that the DRS transmitters can meet the power flux-density (pfd) limits given in Recommendation IT-R SF.358 for sharing between the fixed-satellite se

4、rvice and the fixed and mobile services, recommends 1 that frequency sharing, on a non-interference basis, between transmitters in the space research service and receivers of the fixed and mobile services or the radiolocation service is feasible near 14 and 15 GHz provided that appropriate pfd limit

5、s are specified for the space research service; 2 that, in frequency bands near 14 and 15 GHz shared between the space research service (DRS systems), and the fixed and mobile services or the radiolocation service, the space research satellites can operate with the following pfd limits produced at t

6、he surface of the Earth in any 4 kHz band for all conditions and methods of modulation not exceeding: -148 dB(W/m2) for O“ 6 5 5“ -148 + (6 - 5)/2 dB(W/m2) for 5“ 6 5 25“ -138 dB(W/m2) for 25“ 6 590“ where 6 is the angle of arrival of the radio-frequency wave (degrees above the horizontal); and that these limits relate to the pfd and angles of arrival which would be obtained under free-space propagation conditions. * This Recommendation should be brought to the attention of Radiocommunication Study Groups 8 and 9.

展开阅读全文
相关资源
猜你喜欢
  • ASTM E1781-2008 Standard Practice for Secondary Calibration of Acoustic Emission Sensors《声发射传感器的二次校准标准实施规程》.pdf ASTM E1781-2008 Standard Practice for Secondary Calibration of Acoustic Emission Sensors《声发射传感器的二次校准标准实施规程》.pdf
  • ASTM E1782-2003 Standard Test Method for Determining Vapor Pressure by Thermal Analysis《用热分析法测定蒸气压力的标准试验方法》.pdf ASTM E1782-2003 Standard Test Method for Determining Vapor Pressure by Thermal Analysis《用热分析法测定蒸气压力的标准试验方法》.pdf
  • ASTM E1782-2008 Standard Test Method for Determining Vapor Pressure by Thermal Analysis《用热分析法测定蒸气压力的标准试验方法》.pdf ASTM E1782-2008 Standard Test Method for Determining Vapor Pressure by Thermal Analysis《用热分析法测定蒸气压力的标准试验方法》.pdf
  • ASTM E1782-2014 Standard Test Method for Determining Vapor Pressure by Thermal Analysis《用热分析法测定蒸气压力的标准试验方法》.pdf ASTM E1782-2014 Standard Test Method for Determining Vapor Pressure by Thermal Analysis《用热分析法测定蒸气压力的标准试验方法》.pdf
  • ASTM E1783 E1783M-1996(2013)e1 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures《建筑物和停车场结构用预成形建筑带状密封件的标准规范》.pdf ASTM E1783 E1783M-1996(2013)e1 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures《建筑物和停车场结构用预成形建筑带状密封件的标准规范》.pdf
  • ASTM E1783 E1783M-1996(2017) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures《建筑物和停车场结构用预成形建筑带状密封件的标准规格》.pdf ASTM E1783 E1783M-1996(2017) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures《建筑物和停车场结构用预成形建筑带状密封件的标准规格》.pdf
  • ASTM E1783-1996(2005) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures《建筑物和停车场建筑的预制结构密封带的技术规范》.pdf ASTM E1783-1996(2005) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures《建筑物和停车场建筑的预制结构密封带的技术规范》.pdf
  • ASTM E1783-1996(2009) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures《建筑物和停车场建筑的预制结构密封带的标准规范》.pdf ASTM E1783-1996(2009) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures《建筑物和停车场建筑的预制结构密封带的标准规范》.pdf
  • ASTM E1784-1997(2002) Standard Test Method for Total Peroxides in Acrylonitrile《丙烯腈中过氧化物总含量的标准试验方法》.pdf ASTM E1784-1997(2002) Standard Test Method for Total Peroxides in Acrylonitrile《丙烯腈中过氧化物总含量的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1