ITU-R SM 1135-1995 SINPO and SINPFEMO Codes《SINPO和SINPFEMO代码》.pdf

上传人:bonesoil321 文档编号:793976 上传时间:2019-02-02 格式:PDF 页数:3 大小:115.92KB
下载 相关 举报
ITU-R SM 1135-1995 SINPO and SINPFEMO Codes《SINPO和SINPFEMO代码》.pdf_第1页
第1页 / 共3页
ITU-R SM 1135-1995 SINPO and SINPFEMO Codes《SINPO和SINPFEMO代码》.pdf_第2页
第2页 / 共3页
ITU-R SM 1135-1995 SINPO and SINPFEMO Codes《SINPO和SINPFEMO代码》.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、RX ITU-R SM.1135 47 SECTION 1D: RECOMMENDATIONS “INCORPORATED BY REFERENCE INTO THE RADIO REGULATIONS AS REVISED BY THE WORLD RADIOCOMMUNICATION CONFERENm 1995 RECOMMENDATION ITU-R SM.l135* SWO AND SINFFEMO CODES (1995) The Radiocommunication Assembly, considering a) the Final Report and recommendat

2、ions of the Voluntary Group of Experts (VGE) to study allocation and improved use of the radio-frequency spectrum and simplification of the Radio Regulations (RR) which was established in accordance with Resolution No. 8 of the Plenipotentiary Conference (Nice, 1989) and continued its work in accord

3、ance with Resolution No. 8 of the Additional Plenipotentiary Conference (Geneva, 1992); b) that the 1995 World Radiocommunication Conference (WRC-95) will consider and adopt, as appropriate, proposals for the Simplified RR; c) that it would be advisable for all administrations to use the same signal

4、 reporting codes, and that the number of officially recognized codes must consequently be as restricted as possible; 4 that the abbreviations in the Q code are in general inadequate for obtaining a clear idea of the quality of a transmission; e) that the SINPO code has been used for several years by

5、 some administrations; f) that the SINPO code gives a more accurate description of the transmission quality and is easy to use; g) that the SINPFEMO code is derived from the SINPO code by adding three letters relating to special features of telephone transmissions and is easy to use; h) that the inf

6、ormation which is not included in the Si“0 or SINPFEMO code may be transmitted satisfactorily by service message, recommends that the SINPO and SINPFEMO codes given in Annex 1 shall be used by administrations. 1 Reference has been made to this Recommendation in the Radio Regulations (RR) as revised

7、by the World Radiocommunication Conference 1995 (WRC-95). This will come into force on 1 June 1998. 48 S Signal strength Excellent Good Fair Poor 1 Barely audible Rating scale I N P O Overall rating Degrading effect of Propagation disturbance Interference Noise Nil Nil Ni 1 Excellent Slight Slight S

8、light Good Moderate Moderate Moderate Fair Severe Severe Severe Poor Extreme Extreme Extreme Unusable - - ITU-R RECMN*SM* SERIES 75 4855212 0526773 997 Rec. ITU-R SM.1135 Rating scale ANNEX 1 Signal strength SINPO and SINPFEMO codes Nil Slight Moderate Severe Extreme SINPO signal reporting code Nii

9、Slow Moderate Fast Very fast Overall rating Mechanized Operations I 5. Excellent 4. Good 3. Fair 2. Poor 1. Unusable 4 3 2 4-channel time-division multiplex 2-channel time-division multiplex Marginal single start-stop printer BKs, XQs and call signs readable Unreadable SINPFEMO signai reporting code

10、 Interference Nil Slight Moderate Severe Extreme Noise Frequency of fading Degrading effect of disturbance Nil Slight Moderate Severe Extreme Quality Overall rating Depth Excellent Good Fair Poor Very poor Maximum Good Fair Poor or Nil Continuously over- modulated Excellent Good Fair Poor Unusable S

11、pecial remarks: a) b) c) d) A signal report shall consist of the code word SINPO or SINPFEMO followed by a group of five or eight numerais, rating, respectively, the five or eight characteristics of the particular signai code. The letter X shall be used instead of a numeral for characteristics not r

12、ated. Although the code word SINPFEMO is intended for radiotelephony, it may be used for radiotelegraphy. The overall rating for radiotelegraphy shall be as indicated in Tables 1 and 2. TABLE 1 ITU-R RECMN*SM* SERIES 95 4855232 0.526774 823 Rec. ITU-R SM.1135 Overall rating TABLE 2 Morse Operation O

13、verall rating 5. Excellent 4. Good _ _ 5. Excellent 4. Good 3. Fair 2. Poor 1. Unusable Operating Condition Quality Signai quality unaffected Commercial Signal quality slightly affected High speed 100 wpm 50 wpm BKs, XQs and call signs readable Unreadable 3. Fair 2. Poor 1. Unusable e) The overall rating for telephony shall be as indicated in Table 3. Signal quality seriously affected; channel usable by operators or by experienced subscribers Channel just usable by operators Channel unusable by operators Marginally commercial Not commercial TABLE 3 I I I I 49

展开阅读全文
相关资源
猜你喜欢
  • ASTM F2465 F2465M-2005(2011)e1 Standard Guide for Oil Spill Dispersant Application Equipment Single-point Spray Systems《溢油分散剂应用设备的标准指南 单点喷洒系统》.pdf ASTM F2465 F2465M-2005(2011)e1 Standard Guide for Oil Spill Dispersant Application Equipment Single-point Spray Systems《溢油分散剂应用设备的标准指南 单点喷洒系统》.pdf
  • ASTM F2465 F2465M-2005(2016) Standard Guide for Oil Spill Dispersant Application Equipment Single-point Spray Systems《溢油分散剂应用设备的标准指南 单点喷射系统》.pdf ASTM F2465 F2465M-2005(2016) Standard Guide for Oil Spill Dispersant Application Equipment Single-point Spray Systems《溢油分散剂应用设备的标准指南 单点喷射系统》.pdf
  • ASTM F2465-2005 Standard Guide for Oil Spill Dispersant Application Equipment Single-point Spray Systems《漏油分散剂应用设备标准指南 单点喷射系统》.pdf ASTM F2465-2005 Standard Guide for Oil Spill Dispersant Application Equipment Single-point Spray Systems《漏油分散剂应用设备标准指南 单点喷射系统》.pdf
  • ASTM F2466-2005 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications《运输用硅酮橡胶中硅酮挥发物测定的标准实施规程》.pdf ASTM F2466-2005 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications《运输用硅酮橡胶中硅酮挥发物测定的标准实施规程》.pdf
  • ASTM F2466-2010 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications《运输行业用硅酮橡胶中的硅酮挥发物测定的标准实施规程》.pdf ASTM F2466-2010 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications《运输行业用硅酮橡胶中的硅酮挥发物测定的标准实施规程》.pdf
  • ASTM F2466-2010(2018) Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications.pdf ASTM F2466-2010(2018) Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications.pdf
  • ASTM F2467-2006 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications《运输用途中用压力指片(PIF)测量静态密封压力的标准实施规程》.pdf ASTM F2467-2006 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications《运输用途中用压力指片(PIF)测量静态密封压力的标准实施规程》.pdf
  • ASTM F2467-2006(2013) Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications《运输用途中用压力指片 (PIF) 测量静态密封压力的标准实施规程》.pdf ASTM F2467-2006(2013) Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications《运输用途中用压力指片 (PIF) 测量静态密封压力的标准实施规程》.pdf
  • ASTM F2468-2005 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications《运输用硅胶粘剂和密封剂规定的标准分类》.pdf ASTM F2468-2005 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications《运输用硅胶粘剂和密封剂规定的标准分类》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1