ITU-T H 248 30 NOTE-2007 Gateway control protocol RTCP extended performance metrics packages (Study Group 16)《网关控制协议 RTCP扩展性能度量单位包 研究组16》.pdf

上传人:deputyduring120 文档编号:797525 上传时间:2019-02-02 格式:PDF 页数:1 大小:80.88KB
下载 相关 举报
ITU-T H 248 30 NOTE-2007 Gateway control protocol RTCP extended performance metrics packages (Study Group 16)《网关控制协议 RTCP扩展性能度量单位包 研究组16》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 Union internationale des tlcommunications Place des Nations 1211 GENEVE 20 Suisse Switzerland Suiza 瑞士 COVERING NOTE GENERAL SECRETARIAT OF THE INTERNATIONAL TELECOMMUNICATION UNION Geneva, 14 June 2007 ITU TELECOMMUNICATION STANDARDIZATION SECTOR Subject: Erratum 1 (06/2007) to ITU-T Recommendatio

2、n H.248.30 (01/2007), Gateway control protocol: RTCP extended performance metrics packages 1) In clauses 6.1.1 and 8.1.1, indicate the error code value as follows: 6.1.1 Minimum Gap Threshold Description: Attempts to do so should result in the MG returning error xxx449 “Unknown or unsupported value“

3、 8.1.1 Minimum Gap Threshold Description: Attempts to do so should result in the MG returning error xxx449 “Unknown or unsupported value“. 2) At the end of clauses 6.5 and 8, add the following notes: 6.5 Procedures c) the period of time between two bursts. NOTE See section 4.7.2 of IETF RFC 3611 for more detailed explanation. 8.5 Procedures c) the period of time between two bursts. NOTE See section 4.7.2 of IETF RFC 3611 for more detailed explanation.

展开阅读全文
相关资源
猜你喜欢
  • GOST 13110-1983 Sheet stamping dies Lower plates-blanks for dies with diagonally positioned guide assemblies Construction and dimensions《带对角导柱和衬套的板材冲模用下料板 结构及尺寸》.pdf GOST 13110-1983 Sheet stamping dies Lower plates-blanks for dies with diagonally positioned guide assemblies Construction and dimensions《带对角导柱和衬套的板材冲模用下料板 结构及尺寸》.pdf
  • GOST 13111-1983 Sheet stamping dies Upper plastic-blanks for dies with diagonally positioned guide assemdlies Design and dimensions《带对角导柱和衬套的板材冲模用上料板 结构及尺寸》.pdf GOST 13111-1983 Sheet stamping dies Upper plastic-blanks for dies with diagonally positioned guide assemdlies Design and dimensions《带对角导柱和衬套的板材冲模用上料板 结构及尺寸》.pdf
  • GOST 13112-1983 Die bases for cold plastic working dies with guide posts rear located Construction and dimensions《带后导柱和衬套的板材冲模用料板 结构及尺寸》.pdf GOST 13112-1983 Die bases for cold plastic working dies with guide posts rear located Construction and dimensions《带后导柱和衬套的板材冲模用料板 结构及尺寸》.pdf
  • GOST 13113-1983 Die bases for cold plastic working dies with guide posts located on central line Construction and dimensions《带中间导柱和衬套的板材冲模用料板 结构及尺寸》.pdf GOST 13113-1983 Die bases for cold plastic working dies with guide posts located on central line Construction and dimensions《带中间导柱和衬套的板材冲模用料板 结构及尺寸》.pdf
  • GOST 13114-1975 Die plate without shelves for cold plastic working dies Construction and dimensions《板材冲模用无托架料板 结构及尺寸》.pdf GOST 13114-1975 Die plate without shelves for cold plastic working dies Construction and dimensions《板材冲模用无托架料板 结构及尺寸》.pdf
  • GOST 13115-1975 Die plates with shelves located along the width of cold plastic working dies Construction and dimensions《板材冲模用宽向带托架料的板 结构及尺寸》.pdf GOST 13115-1975 Die plates with shelves located along the width of cold plastic working dies Construction and dimensions《板材冲模用宽向带托架料的板 结构及尺寸》.pdf
  • GOST 13116-1975 Die plates with shelves located along the length of the die plate for cold plastic working dies Construction and dimensions《板材冲模用长向带托架的料板 结构及尺寸》.pdf GOST 13116-1975 Die plates with shelves located along the length of the die plate for cold plastic working dies Construction and dimensions《板材冲模用长向带托架的料板 结构及尺寸》.pdf
  • GOST 13118-1983 Guide posts smooth for cold plastic working dies Construction and dimensions《低温塑料加工模用导柱 结构和尺寸规格》.pdf GOST 13118-1983 Guide posts smooth for cold plastic working dies Construction and dimensions《低温塑料加工模用导柱 结构和尺寸规格》.pdf
  • GOST 13119-1981 Die posta with flute for cold plastic working dies Construction and dimensions《低温塑料加工模用带槽导柱 结构和尺寸规格》.pdf GOST 13119-1981 Die posta with flute for cold plastic working dies Construction and dimensions《低温塑料加工模用带槽导柱 结构和尺寸规格》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1