1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T H.840 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (01/2015) SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS E-health multimedia services and applications Interoperability compliance testing of personal health systems (HRN,
2、 PAN, LAN, TAN and WAN) Conformance of ITU-T H.810 personal health devices: PAN/LAN/TAN: USB host Recommendation ITU-T H.840 ITU-T H-SERIES RECOMMENDATIONS AUDIOVISUAL AND MULTIMEDIA SYSTEMS CHARACTERISTICS OF VISUAL TELEPHONE SYSTEMS H.100H.199 INFRASTRUCTURE OF AUDIOVISUAL SERVICES General H.200H.
3、219 Transmission multiplexing and synchronization H.220H.229 Systems aspects H.230H.239 Communication procedures H.240H.259 Coding of moving video H.260H.279 Related systems aspects H.280H.299 Systems and terminal equipment for audiovisual services H.300H.349 Directory services architecture for audi
4、ovisual and multimedia services H.350H.359 Quality of service architecture for audiovisual and multimedia services H.360H.369 Telepresence H.420H.429 Supplementary services for multimedia H.450H.499 MOBILITY AND COLLABORATION PROCEDURES Overview of Mobility and Collaboration, definitions, protocols
5、and procedures H.500H.509 Mobility for H-Series multimedia systems and services H.510H.519 Mobile multimedia collaboration applications and services H.520H.529 Security for mobile multimedia systems and services H.530H.539 Security for mobile multimedia collaboration applications and services H.540H
6、.549 Mobility interworking procedures H.550H.559 Mobile multimedia collaboration inter-working procedures H.560H.569 BROADBAND, TRIPLE-PLAY AND ADVANCED MULTIMEDIA SERVICES Broadband multimedia services over VDSL H.610H.619 Advanced multimedia services and applications H.620H.629 Ubiquitous sensor n
7、etwork applications and Internet of Things H.640H.649 IPTV MULTIMEDIA SERVICES AND APPLICATIONS FOR IPTV General aspects H.700H.719 IPTV terminal devices H.720H.729 IPTV middleware H.730H.739 IPTV application event handling H.740H.749 IPTV metadata H.750H.759 IPTV multimedia application frameworks H
8、.760H.769 IPTV service discovery up to consumption H.770H.779 Digital Signage H.780H.789 E-HEALTH MULTIMEDIA SERVICES AND APPLICATIONS Interoperability compliance testing of personal health systems (HRN, PAN, LAN and WAN) H.820H.859 Multimedia e-health data exchange services H.860H.869 For further d
9、etails, please refer to the list of ITU-T Recommendations. Rec. ITU-T H.840 (01/2015) i Recommendation ITU-T H.840 Conformance of ITU-T H.810 personal health devices: PAN/LAN/TAN: USB host Summary Recommendation ITU-T H.840 is a transposition of Continua Test Tool DG2013, Test Suite Structure users
10、of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendat
11、ion does not give it, as a stand-alone document, the status of a Recommendation. ITU-T H.810 Recommendation ITU-T H.810 (2013), Interoperability design guidelines for personal health systems. IEEE 11073-20601A IEEE 11073-20601A-2010, IEEE Health informatics Personal health device communication Part
12、20601: Application profile Optimized Exchange Protocol Amendment 1. USB DevClass USB Implementers Forum (2007-11), Universal Serial Bus Device Class Definition for Personal Healthcare Devices, Release 1.0, plus Errata (15 February 2008), Personal Healthcare section. USB_2.0 USB Implementers Forum (2
13、000), Universal Serial Bus Specification 2.0. 3 Definitions 3.1 Terms defined elsewhere 3.1.1 agent IEEE 11073-20601A: A node that collects and transmits personal health data to an associated manager. 3.1.2 manager IEEE 11073-20601A: A node receiving data from one or more agent systems. Some example
14、s of managers include a cellular phone, health appliance, set top box, or a computer system. 3.2 Terms defined in this Recommendation None. _ 1 This Recommendation includes an electronic attachment with the protocol implementation extra information for testing (PIXIT) required for the implementation
15、 of Annex A. 2 Rec. ITU-T H.840 (01/2015) 4 Abbreviations and acronyms This Recommendation uses the following abbreviations and acronyms: ATS Abstract Test Suite DUT Device Under Test CDG Continua Design Guidelines GUI Graphical User Interface IUT Implementation Under Test MDS Medical Device System
16、PAN Personal Area Network PCT Protocol Conformance Testing PCO Point of Control and Observation PHD Personal Healthcare Device PHDC Personal Healthcare Device Class PHM Personal Health Manager PICS Protocol Implementation Conformance Statement PIXIT Protocol Implementation extra Information for Test
17、ing SDP Service Discovery Protocol SOAP Simple Object Access Protocol SUT System Under Test TCRL Test Case Reference List TCWG Test and Certification Working Group TP Test Purpose TSS Test Suite Structure USB Universal Serial Bus WDM Windows Driver Model 5 Conventions The key words “SHALL“, “SHALL N
18、OT“, “SHOULD“, “SHOULD NOT“, “MAY“, “MAY NOT“ in this document are to be interpreted as in b-ETSI SR 001 262. SHALL is equivalent to must or it is required to. SHALL NOT is equivalent to must not or it is not allowed. SHOULD is equivalent to it is recommended to. SHOULD NOT is equivalent to it is no
19、t recommended to. MAY is equivalent to is permitted. MAY NOT is equivalent to it is not required that. NOTE The above-mentioned key words are capitalized for illustrative purposes only and they do not appear capitalized within this Recommendation. Rec. ITU-T H.840 (01/2015) 3 Reference is made in th
20、e ITU-T H.800-series of Recommendations to different versions of the Continua Design Guidelines (CDG) by a specific designation. The list of terms that may be used in this Recommendation is provided in Table 1. Table 1 List of designations associated to the various versions of the CDG CDG name Trans
21、posed as Version Description Designation 2013 plus errata ITU-T H.810 4.1 CDG 2013 plus errata noting all ratified bugs. - 2013 4.0 Release 2013 of the CDG including maintenance updates of CDG 2012 and additional guidelines that cover new functionalities. Endorphin 2012 plus errata 3.1 CDG 2012 plus
22、 errata noting all ratified bugs b-CDG 2012. - 2012 3.0 Release 2012 of the CDG including maintenance updates of CDG 2011 and additional guidelines that cover new functionalities. Catalyst 2011 plus errata 2.1 CDG 2011 integrated with identified errata. - 2011 2.0 Release 2011 of the CDG including m
23、aintenance updates of CDG 2010 and additional guidelines that cover new functionalities b-CDG 2011. Adrenaline 2010 plus errata 1.6 CDG 2010 integrated with identified errata. - 2010 1.5 Release 2010 of the CDG with maintenance updates of CDG Version 1 and additional guidelines that cover new functi
24、onalities b-CDG 2010. 1.5 1.0 1.0 First released version of the CDG b-CDG 1.0. - 6 Test suite structure (TSS) The test purposes (TP) of this Recommendation are found in Annex A and have been divided into two main groups: Group 1: Descriptors (DESC) Group 2: Metadata message preamble (MDMP) Subgroup
25、2.1: Metadata message preamble feature (FEAT) Subgroup 2.2: Get data status before setting/clearing metadata message preamble feature (GDS) Subgroup 2.3: Set/Clear Metadata message preamble feature (SC) Subgroup 2.4: Metadata message preamble transfer (TRANS) Subgroup 2.5: Metadata message preamble
26、feature error conditions (ERR) 4 Rec. ITU-T H.840 (01/2015) 7 Electronic attachment The protocol implementation conformance statements (PICS) and the protocol implementation extra information for testing (PIXIT) required for the implementation of Annex A can be downloaded from http:/handle.itu.int/1
27、1.1002/2000/12067. In the electronic attachment, letters “C“ and “I“ in the column labelled “Mandatory“ are used to distinguish between “PICS“ and “PIXIT“ respectively during testing. If the cell is empty, the corresponding PICS is “independent“. If the field contains a “C“, the corresponding PICS i
28、s dependent on other PICS, and the logical expression is detailed in the “SCR_Expression“ field. The static conformance review (SCR) is used in the test tool to assert whether the PICS selection is consistent. Rec. ITU-T H.840 (01/2015) 5 Annex A Test purposes (TP) (This annex forms an integral part
29、 of this Recommendation.) A.1 TP definition conventions The test purposes (TP) are defined according to the following rules: TP Id: This is a unique identifier (TP/ ). It is specified according to the naming convention defined below: Each test purpose identifier is introduced by the prefix “TP“. : T
30、his is the test tool that will be used in the test case. PHDC: USB host personal health device class : This is the device under test. HOS: PHDC host DEV: PHDC device (not used because it is out of the scope of the developed test tool) : This identifies a group of test cases. : This identifies a subg
31、roup of test cases. : This identifies the type of testing. BV: valid behaviour test BI: invalid behaviour test : This is a sequential number that identifies the test purpose. TP label: This is the TPs title. Coverage: This contains the specification reference and clause to be checked by the TP. Spec
32、: This indicates the earliest version of the specification from which the testable items to be checked by the TP were included. Testable Item: This contains testable items to be checked by the TP. Test purpose: This is a description of the requirements to be tested. Applicability: This contains the
33、PICS items that define if the test case is applicable or not for a specific device. When a TP contains an “ALL“ in this field it means that it applies to the device under test within that scope of the test (specialization, transport used, etc.). Initial condition: This indicates the state to which t
34、he DUT needs to be moved at the beginning of TC execution. Test procedure: This describes the steps to be followed in order to execute the test case. Pass/Fail criteria: This provides criteria to decide whether the DUT passes or fails the test case. 6 Rec. ITU-T H.840 (01/2015) A.2 Group 1: Descript
35、ors (DESC) TP Id TP/PHDC/HOS/DESC/BV-000_A TP label Device class in interface descriptor Coverage Spec USB DevClass Testable items DeviceDesc 1; M Applicability C_MAN_OXP_038 AND C_MAN_OXP_000 Initial condition The simulated device is plugged into the host under test. Test procedure 1. Connect the h
36、ost under test and simulated device, then the enumeration process shall start automatically. During this process the host will issue a GetDescriptor() request to the test tool device. On the test tool device the bDeviceClass field of the device descriptor is set to 00h and bInterfaceClass of the int
37、erface descriptor is set to 0Fh. 2. The simulated device issues an “Association Request“ message to the host under test. 3. The host under test shall reply with an “Association Response“ (accepted, accepted-unknown-config or rejected) or an “Association Abort“ message. Pass/Fail criteria In step 3,
38、the host under test replies with an “Association Response“(accepted, accepted-unknown-config or rejected) or an “Association Abort“ message. Notes TP Id TP/PHDC/HOS/DESC/BV-000_B TP label Device class in device descriptor Coverage Spec USB DevClass Testable items DeviceDesc 1; M Applicability C_MAN_
39、OXP_038 AND C_MAN_OXP_000 Initial condition The simulated device is plugged into the host under test. Test procedure 1. Connect the host under test and simulated device, then the enumeration process shall start automatically. During this process the host will issue a GetDescriptor() request to the t
40、est tool device. On the test tool device the bDeviceClass field of the device descriptor is set to 0Fh and bInterfaceClass of the interface descriptor is set to 00h. 2. The simulated device issues an “Association Request“ message to the host under test. 3. The host under test shall reply with an “As
41、sociation Response“ (accepted, accepted-unknown-config or rejected) or an “Association Abort“ message. Pass/Fail criteria In step 3, the host under test replies with an “Association Response“ (accepted, accepted-unknown-config or rejected) or an “Association Abort“ message. Notes Rec. ITU-T H.840 (0
42、1/2015) 7 TP Id TP/PHDC/HOS/DESC/BV-001_A TP label Verify class-defined USB descriptors (no PHDC metadata descriptor, data format code defined by vendor) Coverage Spec USB DevClass Testable items ClassFunDesc 1; M ClassFunDesc 2; M ClassFunDesc 3; M ClassFunDesc 4; M ClassFunDesc 6; M ClassFunExtDes
43、c 1; M ClassFunExtDesc 3; M ClassFunExtDesc 4; M ClassFunExtDesc 5; M ClassFunExtDesc 7; M ClassFunExtDesc 8; M ClassFunExtDesc 9; M MetaDataDesc 1; M MetaDataDesc 2; M MetaDataDesc 3; M MetaDataDesc 4; M Applicability C_MAN_OXP_038 AND C_MAN_OXP_000 Initial condition The simulated device is plugged
44、 into the host under test. Test procedure 1. Connect the host under test and simulated device, then the enumeration process shall start automatically. During this process the host will issue a GetDescriptor() request to the test tool device. On the test tool device the PHDC Metadata descriptor will
45、not be included because it is optional and the bPHDCDataCode field of the PHDC class function descriptor will be set to 01h (PHDC_VENDOR). 2. The test tool shows a pop-up message asking the test operator to verify that the host continues to function normally (i.e., keyboard and mouse still function,
46、 system still up and running). Pass/Fail criteria In step 2, the host does not shut down or stop accepting input from other USB devices (keyboard, mouse). Notes TP Id TP/PHDC/HOS/DESC/BV-001_B TP label Verify class-defined USB descriptors (PHDC Metadata descriptor, data format code following ISO/IEE
47、E 11073-20601) Coverage Spec USB DevClass Testable items ClassFunDesc 1; M ClassFunDesc 2; M ClassFunDesc 3; M ClassFunDesc 4; M ClassFunDesc 6; M ClassFunExtDesc 1; M ClassFunExtDesc 3; M ClassFunExtDesc 4; M ClassFunExtDesc 5; M ClassFunExtDesc 7; M ClassFunExtDesc 8; M ClassFunExtDesc 9; M MetaDa
48、taDesc 1; M MetaDataDesc 2; M MetaDataDesc 3; M MetaDataDesc 4; M Applicability C_MAN_OXP_038 AND C_MAN_OXP_000 Initial condition The simulated device is plugged into the host under test. 8 Rec. ITU-T H.840 (01/2015) Test procedure 1. Connect the host under test and simulated device, then the enumer
49、ation process shall start automatically. During this process the host will issue a GetDescriptor() request to the test tool device. On the test tool device the PHDC Metadata descriptor will be included because it is optional and the bPHDCDataCode field of the PHDC class function descriptor will be set to 02h (PHDC_11073_20601). 2. The simulated device issues an “Association Request“ message
