1、 INTERNATIONAL TELECOMMUNICATION UNION ITU-T Q.2931 B TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (12/2000) SERIES Q: SWITCHING AND SIGNALLING Broadband ISDN B-ISDN application protocols for access signalling Broadband integrated services digital network (B-ISDN) Digital subscriber signalling sy
2、stem No. 2 (DSS2) User-network interface (UNI) layer 3 specification for basic call/connection control: Protocol implementation conformance statement (PICS) proforma ITU-T Recommendation Q.2931 B (Formerly CCITT Recommendation) ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN TH
3、E INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4 AND No. 5 Q.120Q.249 SPECIFICATIONS OF
4、 SIGNALLING SYSTEM No. 6 Q.250Q.309 SPECIFICATIONS OF SIGNALLING SYSTEM R1 Q.310Q.399 SPECIFICATIONS OF SIGNALLING SYSTEM R2 Q.400Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.799 Q3 INTERFACE Q.800Q.849 DIGITAL SUBS
5、CRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799 BROADBAND ISDN Q.2000Q.2999 General aspects Q.2000Q.2099 Signalli
6、ng ATM adaptation layer (SAAL) Q.2100Q.2199 Signalling network protocols Q.2200Q.2299 Common aspects of B-ISDN application protocols for access signalling and network signalling and interworking Q.2600Q.2699 B-ISDN application protocols for the network signalling Q.2700Q.2899 B-ISDN application prot
7、ocols for access signalling Q.2900Q.2999 For further details, please refer to the list of ITU-T Recommendations. ITU-T Q.2931 B (12/2000) i ITU-T Recommendation Q.2931 B Broadband integrated services digital network (B-ISDN) Digital subscriber signalling system No. 2 (DSS2) User-network interface (U
8、NI) layer 3 specification for basic call/connection control: Protocol implementation conformance statement (PICS) proforma Summary This Recommendation specifies the Protocol Implementation Conformance Statement (PICS) proforma for the TBreference point or coincident SBand TBreference point (as defin
9、ed in ITU-T I.413 2) of implementations conforming to the procedures for the support of point-to-point release 1 switched virtual channel connections between the calling party and the called party of the Digital Subscriber Signalling System No. 2 (DSS2) protocol for the Broadband Integrated Services
10、 Digital Network (B-ISDN), ITU-T Q.2931 1. Other Recommendations of the Q.2931 family specify Test Suite Structure and Test Purposes (TSS it is based on an external SDOs standard published in English. Source ITU-T Recommendation Q.2931 B was prepared by ITU-T Study Group 11 (2001-2004) and approved
11、under the WTSA Resolution 1 procedure on 6 December 2000. ii ITU-T Q.2931 B (12/2000) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of
12、 ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topic
13、s for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepa
14、red on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. INTELLECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the prac
15、tice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation develo
16、pment process. As of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefo
17、re strongly urged to consult the TSB patent database. ITU 2001 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from ITU. ITU-T Q.2931 B (12/2000)
18、iii CONTENTS Page 1 Scope. 1 2 References. 1 3 Endorsement . 2 4 Coverage . 2 5 Modifications 2 5.1 General 2 5.2 Additional major capabilities 3 5.3 ATM adaptation layer parameters IE 3 5.4 ATM traffic descriptor IE. 8 5.5 Broadband report type IE 9 5.6 Broadband high layer information IE . 13 5.7
19、Broadband low layer information IE 14 5.8 Broadband sending complete IE . 17 5.9 Called party number IE. 18 5.10 Called party subaddress 19 5.11 Calling party number IE . 19 5.12 Calling party subaddress IE 21 5.13 CONNECTION AVAILABLE. 22 5.14 End-to-end transit delay 24 5.15 Quality of service par
20、ameter IE 24 5.16 Symmetric call operation 25 5.17 New timers 25 Appendix I Bibliography 25 ITU-T Q.2931 B (12/2000) 1 ITU-T Recommendation Q.2931 B Broadband integrated services digital network (B-ISDN) Digital subscriber signalling system No. 2 (DSS2) User-network interface (UNI) layer 3 specifica
21、tion for basic call/connection control: Protocol implementation conformance statement (PICS) proforma 1 Scope This Recommendation specifies the Protocol Implementation Conformance Statement (PICS) proforma for the TBreference point or coincident SBand TBreference point (as defined in ITU-T I.413 2)
22、of implementations conforming to the procedures for the support of point-to-point release 1 switched virtual channel connections between the calling party and the called party of the Digital Subscriber Signalling System No. 2 (DSS2) protocol for the Broadband Integrated Services Digital Network (B-I
23、SDN), ITU-T Q.2931 1. Other Recommendations of the Q.2931 family specify Test Suite Structure and Test Purposes (TSS users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A li
24、st of the currently valid ITU-T Recommendations is regularly published. 1 ITU-T Q.2931 (1995), Digital subscriber signalling system No. 2 (DSS2) User-network interface (UNI) layer 3 specification for basic call/connection control. 2 ITU-T I.413 (1993), B-ISDN user-network interface. 3 ETSI EN 300 44
25、3-2 V1.2.3 (1999), Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specificat
26、ion. 4 ITU-T Q.2961 B (2000), Digital subscriber signalling system No. 2 (DSS2) Additional traffic parameters: Protocol implementation conformance statement (PICS) proforma. 2 ITU-T Q.2931 B (12/2000) 5 ITU-T Q.2965.1 B (2000), Digital subscriber signalling system No. 2 Support of Quality of Service
27、 classes: Protocol implementation conformance statement (PICS) proforma. 6 ITU-T Q.2965.2 B (2000), Digital subscriber signalling system No. 2 Signalling of individual Quality of Service parameters: Protocol implementation conformance statement (PICS) proforma. 3 Endorsement The text of ETSI EN 300
28、443-2 3 was approved by ITU-T as Recommendation Q.2931 B with agreed modifications as given below. NOTE Underlining and/or strike-out is used to highlight new or deleted text where detailed indication of modifications is necessary. 4 Coverage This Recommendation covers ITU-T Q.2931 1 as modified by
29、Amendment 1 (06/97), Amendment 2 (03/99) and Corrigendum 1 to Amendment 2, Amendment 3 (03/99) and Amendment 4 (12/99). 5 Modifications 5.1 General Throughout the text of ETSI EN 300 443-2 3 replace references and text and expressions as shown in the following table: Reference in ETSI EN 300 443-2 M
30、odified reference EN 300 443 Q.2931-series Recommendations EN 300 443-1 ITU-T Q.2931 ITU-T Q.2931 as modified by EN 300 443-1 ITU-T Q.2931 EN 301 068-2 ITU-T Recommendation Q.2961 B EN Recommendation Standard Recommendation Page 6, Intellectual Property Rights Delete the whole section. Page 6, Forew
31、ord Delete the whole Foreword. NOTE 1 It is replaced by the Foreword of this Recommendation. Page 6, Introduction Delete the whole Introduction. NOTE 2 The technical content of this section is reproduced in the Scope of this Recommendation. ITU-T Q.2931 B (12/2000) 3 Page 8, Clause 1 Scope Replace t
32、he whole clause with the following: “1 Scope See clause 1 Scope of this Recommendation above.“ Page 15, subclause A.3 Identification of the protocol to which this PICS proforma applies Replace the content of this subclause by the following: “This PICS proforma applies to the following Recommendation
33、: ITU-T Q.2931 (1995), Digital subscriber signalling system No. 2 (DSS2) User-network interface (UNI) layer 3 specification for basic call/connection control.“ Page 85, History Delete the whole clause “History“. 5.2 Additional major capabilities On page 17, in A.7.1 “Major capabilities“ add the foll
34、owing new items to the group “Others“ in Table A.2 “Major capabilities of the user role“: Item Major capability: Does the implementation support. Conditions for status Status Reference Support MCu 15 indication of using recovered clock for transmission O Annex M Yes No MCu 16 support of end-to-end c
35、ompletion indication O Annex N Yes No On page 52, in A.8.1 “Major capabilities“, add the following new items to the group “Others“ in Table A.72 “Major capabilities of the network role“: Item Major capability: Does the implementation support. Conditions for status Status Reference Support MCn 14 han
36、dling of the End-to-end transit delay information element O Annex K Yes No MCn 15 support the indication of using recovered clock for transmission O Annex M Yes No MCn 16 support of end-to-end completion indication O Annex N Yes No 5.3 ATM adaptation layer parameters IE On page 35, in A.7.6.3 “ATM a
37、daptation layer parameters“, modify item IERu 11.11 and add new items and a note before the “Comments“ row of the Table A.39 “ATM adaptation layer parameters information element contents“: 4 ITU-T Q.2931 B (12/2000) Item Does the implementation support the information element field: Status Value Sup
38、port IERu 11.11 SSCS type O Yes No 1. Null2. Data SSCS based on SSCOP (assured) 3. Data SSCS based on SSCOP (non-assured) 4. Frame relay SSCS 5. SSCF to provide CONS 6. SSCF to provide COTS 7. Segmentation and re-assembly SSCS for AAL 1 8. SSCS for trunking O O O O O O O O 0 1 2 4 8 9 16 17 Yes No Y
39、es No Yes No Yes No Yes No Yes No Yes No Yes No IERu 11.13 Multiplier O Yes No IERu 11.14 Maximum CPS-SDU size O 45 64 Yes No IERu 11.15 Maximum number of multiplexed channels O 1 255 Yes No IERu 11.16 Assured data O Yes No 1. Assured data transfer mechanism not used 2. Assured data transfer mechani
40、sm is used O O 0 1 Yes No Yes No IERu 11.17 Error detect O Yes No 1. Error detection mechanism not selected 2. Error detection mechanism is selected O O 0 1 Yes No Yes No IERu 11.18 Forward maximum SSSAR-SDU length O Yes No IERu 11.19 Backward maximum SSSAR-SDU length O Yes No IERu 11.20 Service cat
41、egory O Yes No 1. Audio service 2. Multirate service O O 0 1 Yes No Yes No IERu 11.21 Circuit mode data O Yes No 1. Disabled 2. Enabled O O 0 1 Yes No Yes No IERu 11.22 Frame mode data O Yes No 1. Disabled 2. Enabled O O 0 1 Yes No Yes No IERu 11.23 Demodulated facsimile data O Yes No 1. Disabled 2.
42、 Enabled O O 0 1 Yes No Yes No IERu 11.24 Channel associated signalling O Yes No 1. Disabled 2. Enabled O O 0 1 Yes No Yes No IERu 11.25 DTMF dialled digits O Yes No 1. Disabled 2. Enabled O O 0 1 Yes No Yes No IERu 11.26 R1 dialled digits O Yes No 1. Disabled 2. Enabled O O 0 1 Yes No Yes No IERu 1
43、1.27 R2 dialled digits O Yes No 1. Disabled 2. Enabled O O 0 1 Yes No Yes No IERu 11.28 PCM encoding O Yes No 1. A-law 2. -law O O 0 1 Yes No Yes No IERu 11.29 Maximum length of a frame mode data unit O Yes No IERu 11.30 Profile source O Yes No 1. ITU-T2. Other O O 0 1 Yes No Yes No NOTE Items relev
44、ant to AAL type 1: from IERu 11.1 to IERu 11.7 Items relevant to AAL type 2: IERu 11.11, IERu 11.14 and IERu 11.15; from IERu 11.16 to IERu 11.19 (if SSCS type = SAR), IERu 11.13 and from IERu 11.20 to IERu 11 (if SSCS type = trunking) Items relevant to AAL type 3/4: from IERu 11.8 to IERu 11.11 Ite
45、ms relevant to AAL type 5: IERu 11.8, IERu 11.9 and IERu 11.11 Items relevant to User defined AAL type: IERu 11.12 ITU-T Q.2931 B (12/2000) 5 On page 44, in A.7.7.3 “ATM adaptation layer parameters“, modify item IETu 11.11 and add new items and a note before the “Comments“ row in Table A.56 “ATM ada
46、ptation layer parameters information element contents“: Item Does the implementation support the information element field: Status Value Support IETu 11.11 SSCS type O Yes No 1. Null2. Data SSCS based on SSCOP (assured) 3. Data SSCS based on SSCOP (non-assured) 4. Frame relay SSCS 5. SSCF to provide
47、 CONS 6. SSCF to provide COTS 7. Segmentation and re-assembly SSCS for AAL 1 8. SSCS for trunking O O O O O O O O 0 1 2 4 8 9 16 17 Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No IETu 11.13 Multiplier O Yes No IETu 11.14 Maximum CPS-SDU size O 45 64 Yes No IETu 11.15 Maximum number of multi
48、plexed channels O 1 255 Yes No IETu 11.16 Assured data O Yes No 1. Assured data transfer mechanism not used 2. Assured data transfer mechanism is used O O 0 1 Yes No Yes No IETu 11.17 Error detect O Yes No 1. Error detection mechanism not selected 2. Error detection mechanism is selected O O 0 1 Yes No Yes No IETu 11.18 Forward maximum SSSAR-SDU length O Y
