1、INTERNATIONAL TELECOMMUNICATION UNIONITU-T Q.2963.1 BTELECOMMUNICATIONSTANDARDIZATION SECTOROF ITU(12/2000)SERIES Q: SWITCHING AND SIGNALLINGBroadband ISDN B-ISDN application protocols foraccess signallingDigital subscriber signalling system No. 2 Connection modification: Peak cell ratemodification
2、by the connection owner: Protocolimplementation conformance statement (PICS)proformaITU-T Recommendation Q.2963.1 B(Formerly CCITT Recommendation)ITU-T Q-SERIES RECOMMENDATIONSSWITCHING AND SIGNALLINGSIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORK
3、ING Q.4Q.59FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4 AND No. 5 Q.120Q.249SPECIFICATIONS OF SIGNALLING SYSTEM No. 6 Q.250Q.309SPECIFICATIONS OF SIGNALLING SYSTEM R1 Q.310Q.399SPECI
4、FICATIONS OF SIGNALLING SYSTEM R2 Q.400Q.499DIGITAL EXCHANGES Q.500Q.599INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.799Q3 INTERFACE Q.800Q.849DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999PUBLIC LAND MOBILE NETWORK Q.1000Q.1099INTERWORKING WIT
5、H SATELLITE MOBILE SYSTEMS Q.1100Q.1199INTELLIGENT NETWORK Q.1200Q.1699SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799BROADBAND ISDN Q.2000Q.2999B-ISDN application protocols for access signalling Q.2900Q.2999For further details, please refer to the list of ITU-T Recommendations.ITU-T
6、 Q.2963.1 B (12/2000) iITU-T Recommendation Q.2963.1 BDigital subscriber signalling system No. 2 Connection modification:Peak cell rate modification by the connection owner:Protocol implementation conformance statement (PICS) proformaSummaryThis Recommendation specifies the Protocol Implementation C
7、onformance Statement (PICS)proforma the TBreference point or coincident SBand TBreference point (as defined in ITU-TI.413 3) of implementations conforming to the procedures for the modification of the peak cell ratetraffic parameter by the connection owner in the active phase of the call of the Digi
8、tal SubscriberSignalling System No. 2 (DSS2) protocol for the Broadband Integrated Services Digital Network(B-ISDN), ITU-T Q.2963.1 2.Other Recommendations of the Q.2963.1 family specify Test Suite Structure and Test Purposes(TSS it is based on anexternal SDOs standard published in English.SourceITU
9、-T Recommendation Q.2963.1 B was prepared by ITU-T Study Group 11 (2001-2004) andapproved under the WTSA Resolution 1 procedure on 6 December 2000.ii ITU-T Q.2963.1 B (12/2000)FOREWORDThe International Telecommunication Union (ITU) is the United Nations specialized agency in the field oftelecommunic
10、ations. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ ofITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendationson them with a view to standardizing telecommunications on a worldwide basis.The World Telecommunication
11、 Standardization Assembly (WTSA), which meets every four years,establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on thesetopics.The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1.In some areas of informati
12、on technology which fall within ITU-Ts purview, the necessary standards areprepared on a collaborative basis with ISO and IEC.NOTEIn this Recommendation, the expression “Administration“ is used for conciseness to indicate both atelecommunication administration and a recognized operating agency.INTEL
13、LECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the practice or implementation of this Recommendation mayinvolve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence,validity or applicability of claimed Intellectual Property Rights, whet
14、her asserted by ITU members or othersoutside of the Recommendation development process.As of the date of approval of this Recommendation, ITU had not received notice of intellectual property,protected by patents, which may be required to implement this Recommendation. However, implementors arecautio
15、ned that this may not represent the latest information and are therefore strongly urged to consult theTSB patent database. ITU 2001All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical, including photocopying and microfilm
16、, without permission in writing from ITU.ITU-T Q.2963.1 B (12/2000) iiiCONTENTSPage1 Scope . 12 References 13 Endorsement. 24 Coverage 25 Modifications . 25.1 General. 25.2 CONNECTION AVAILABLE message. 3Appendix I Bibliography. 3ITU-T Q.2963.1 B (12/2000) 1ITU-T Recommendation Q.2963.1 BDigital sub
17、scriber signalling system No. 2 Connection modification:Peak cell rate modification by the connection owner:Protocol implementation conformance statement (PICS) proforma1ScopeThis Recommendation specifies the Protocol Implementation Conformance Statement (PICS)proforma the TBreference point or coinc
18、ident SBand TBreference point (as defined in ITU-T I.4133) of implementations conforming to the procedures for the modification of the peak cell ratetraffic parameter by the connection owner in the active phase of the call of the Digital SubscriberSignalling System No. 2 (DSS2) protocol for the Broa
19、dband Integrated Services Digital Network(B-ISDN), ITU-T Q.2963.1 2.Other Recommendations of the Q.2963.1 family specify Test Suite Structure and Test Purposes(TSS users ofthis Recommendation are therefore encouraged to investigate the possibility of applying the mostrecent edition of the Recommenda
20、tions and other references listed below. A list of currently validITU-T Recommendations is regularly published.1 ITU-T Q.2931 (1995), Digital subscriber signalling system No. 2 (DSS2) User-networkinterface (UNI) layer 3 specification for basic call/connection control.2 ITU-T Q.2963.1 (1999), Digital
21、 subscriber signalling system No. 2 Connectionmodification: Peak cell rate modification by the connection owner.3 ITU-T I.413 (1993), B-ISDN user-network interface.4 ETSI EN 301 003-2 V1.1.3 (1999), Broadband Integrated Services Digital Network(B-ISDN); Digital Subscriber Signalling System No. two (
22、DSS2) protocol; Connectioncharacteristics; Peak cell rate modification by the connection owner; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification.2 ITU-T Q.2963.1 B (12/2000)3 EndorsementThe text of ETSI EN 301 003-2 4 was approved by ITU-T as Recommendation Q.2963.1
23、 B withagreed modifications as given below.NOTE Underlining and/or strike-out is used to highlight new or deleted text where detailed indication ofmodifications is necessary.4 CoverageThis Recommendation covers ITU-T Q.2963.1 2.5 Modifications5.1 GeneralThroughout the text of ETSI EN 301 003-2 4 rep
24、lace references and text as shown in the followingtable:Reference in ETSI EN 301 003-2 Modified referenceEN 300 443-1 ITU-T Q.2931ITU-T Q.2931 as modified by EN 300 443-1 ITU-T Q.2931EN 301 003-1 ITU-T Q.2963.1ITU-T Q.2963.1 as modified by EN 301 003-1 ITU-T Q.2963.1EN RecommendationStandard Recomme
25、ndationPage 4, Intellectual Property RightsDelete the whole section.Page 4, ForewordDelete the whole Foreword.NOTE It is replaced by the Foreword of this Recommendation.Page 5, Clause 1 ScopeReplace the whole clause with the following:“1 ScopeSee clause 1 Scope of this Recommendation above.“Page 5,
26、Clause 2 ReferencesReplace reference 1 with the following below:1 VoidPage 8, clause “Reference column“Modify the text of the clause as below:“Except where explicitly stated, the reference column refers to the appropriate text of ITU-TQ.2963.1 2 Q.2931 as modified by EN 300 443-11describing the part
27、icular item. Note, however,that a reference indicates only the location of the most essential information about an item. AllITU-T Q.2963.1 B (12/2000) 3additional requirements contained in ITU-T Q.2931 1 EN 300 443-11 have also to be taken intoaccount when making a statement about the conformance of
28、 that particular item.“Page 12, clause A.3 “Identification of the protocol to which this PICS proforma applies“Replace the whole clause by the following:“This PICS proforma applies to the following Recommendation:ITU-T Q.2963.1 (1999), Digital subscriber signalling system No. 2 Connection modificati
29、on: Peakcell rate modification by the connection owner“.Page 19, HistoryDelete the whole clause “History“.5.2 CONNECTION AVAILABLE messageOn page 17, clause A.7.3.2 “Requesting entity protocol data unit parameters transmitted“, deleteTable A.8: “Connection Available PDU parameters transmitted“.On pa
30、ge 17, clause A.8.3.1 “Responding entity protocol data unit parameters received“, delete TableA.12 “Connection Available PDU parameters received“.APPENDIX IBibliographyA ETSI EN 300 443-1 V1.3.5 (1998), Broadband Integrated Services Digital Network(B-ISDN); Digital Subscriber Signalling System No. t
31、wo (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 1: Protocolspecification.B ETSI EN 301 003-1 V1.1.3 (1999), Broadband Integrated Services Digital Network(B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connectionchara
32、cteristics; Peak cell rate modification by the connection owner; Part 1: Protocolspecification.C ETSI EN 301 003-3 V1.1.3 (1999), Broadband Integrated Services Digital Network(B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connectioncharacteristics; Peak cell rate modificatio
33、n by the connection owner; Part 3: Test SuiteStructure and Test Purposes (TSS Digital Subscriber Signalling System No. two (DSS2) protocol; Connectioncharacteristics; Peak cell rate modification by the connection owner; Part 4: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Infor
34、mation for Testing (PIXIT)proforma specification for the user.E ETSI EN 301 003-5 V1.2.1 (2000), Broadband Integrated Services Digital Network(B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connectioncharacteristics; Peak cell rate modification by the connection owner; Part 5
35、: Test SuiteStructure and Test Purposes (TSS Digital Subscriber Signalling System No. two (DSS2) protocol; Connectioncharacteristics; Peak cell rate modification by the connection owner; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proform
36、a specification for the network.Geneva, 2001SERIES OF ITU-T RECOMMENDATIONSSeries A Organization of the work of ITU-TSeries B Means of expression: definitions, symbols, classificationSeries C General telecommunication statisticsSeries D General tariff principlesSeries E Overall network operation, te
37、lephone service, service operation and human factorsSeries F Non-telephone telecommunication servicesSeries G Transmission systems and media, digital systems and networksSeries H Audiovisual and multimedia systemsSeries I Integrated services digital networkSeries J Cable networks and transmission of
38、 television, sound programme and other multimedia signalsSeries K Protection against interferenceSeries L Construction, installation and protection of cables and other elements of outside plantSeries M TMN and network maintenance: international transmission systems, telephone circuits,telegraphy, fa
39、csimile and leased circuitsSeries N Maintenance: international sound programme and television transmission circuitsSeries O Specifications of measuring equipmentSeries P Telephone transmission quality, telephone installations, local line networksSeries Q Switching and signallingSeries R Telegraph tr
40、ansmissionSeries S Telegraph services terminal equipmentSeries T Terminals for telematic servicesSeries U Telegraph switchingSeries V Data communication over the telephone networkSeries X Data networks and open system communicationsSeries Y Global information infrastructure and Internet protocol aspectsSeries Z Languages and general software aspects for telecommunication systems
