1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T Q.4003.2 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (02/2016) SERIES Q: SWITCHING AND SIGNALLING Testing specifications Testing specifications for SIP-IMS Communication HOLD using IP multimedia core network subsystem;
2、Conformance testing Part 2: Network side; Test suite structure and test purposes Recommendation ITU-T Q.4003.2 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCTIONS AND INFORM
3、ATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.799
4、 Q3 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799 SPECIFICATIONS OF SIGNALLING
5、 RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR THE NGN Q.3000Q.3899 TESTING SPECIFICATIONS Q.3900Q.4099 Testing specifications for next generation networks Q.3900Q.3999 Testing specifications for SIP-IMS Q.4000Q.4
6、039 Testing specifications for Cloud computing Q.4040Q.4059 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T Q.4003.2 (02/2016) i Recommendation ITU-T Q.4003.2 Communication HOLD using IP multimedia core network subsystem; Conformance testing Part 2: Network side; T
7、est suite structure and test purposes Summary Recommendation ITU-T Q.4003.2 v.1 (2006) is part 2 of the testing specifications for HOLD service implemented on an IMS basis on the network side. The Recommendation specifies the test suite structure and test purposes (TSS Conformance testing Part 2: Ne
8、twork side; Test suite structure and test purposes 1 Scope The present Recommendation provides the test suite structure (TSS) and test purposes (TP) for the test specifications for the communication HOLD on the network side using IP multimedia (IM) core network (CN) subsystem as specified in ITU-T Q
9、.3619 v.1 and IETF RFC 3264 in compliance with the relevant requirements and in accordance with the relevant guidance given in ITU-T X.296. This Recommendation can be used for compliance testing against Recommendation ITU-T Q.3619 v.1 Communication HOLD using IP multimedia core network subsystemProt
10、ocol specification“ on the network side. The version number, v.1, indicates that this is version one of Recommendation ITU-T Q.4003.2, and that it relates to Release 10 of the relevant 3GPP/ETSI standard. 2 References The following ITU-T Recommendations and other references contain provisions which,
11、 through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of appl
12、ying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T
13、 Q.3619 v.1 Recommendation ITU-T Q.3619 v.1, Communication HOLD using IP multimedia core network subsystem. Protocol specification. ITU-T Q.4003.1 v.1 Recommendation ITU-T Q.4003.1 v.1, Communication HOLD using IP multimedia core network subsystem; Conformance Testing Part 1: Network side and user s
14、ide; Protocol implementation conformance statement. ITU-T X.290 Recommendation ITU-T X.290 (1995), OSI conformance testing methodology and framework for protocolRecommendations for ITU-T applications General concepts. ITU-T X.296 Recommendation ITU-T X.296 (1995), OSI conformance testing methodology
15、 and framework for protocol Recommendations for ITU-T applications Implementation conformance statements. IETF RFC 3264 IETF RFC 3264 (2002), An Offer/Answer Model with the Session Description Protocol (SDP). 3 Definitions For the purposes of this Recommendation, the terms and definitions given in I
16、TU-T Q.3619 v.1 and the following apply: 3.1 abstract test suite (ATS): Refer to ITU-T X.290. 2 Rec. ITU-T Q.4003.2 (02/2016) 3.2 implementation under test (IUT): Refer to ITU-T X.290. 3.3 PICS proforma: Refer to ITU-T X.290. 3.4 point of control and observation: Refer to ITU-T X.290. 3.5 protocol i
17、mplementation conformance statement (PICS): Refer to ITU-T X.290. 3.6 system under test (SUT): Refer to ITU-T X.290. 3.7 test purpose (TP): Refer to ITU-T X.290. 3.8 Gm reference point: Reference point between User Equipment and P-CSCF NOTE This may contain additional information. 4 Abbreviations an
18、d acronyms This Recommendation uses the following abbreviations and acronyms: IMS IP Multimedia Subsystem IP Internet Protocol IUT Implementation Under Test PICS Protocol Implementation Conformance Statement SDP Session Description Protocol SIP Session Initiation Protocol SUT System Under Test UE Us
19、er Equipment 5 Test suite structure (TSS) and test configuration 5.0 Introduction The following test suite structure is used in this Recommendation. Table 1 Test suite structure Network CH_N01_xxx 5.1 Configuration The scope of this Recommendation is to test the signalling and procedural aspects of
20、the stage 3 requirements as described in ITU-T Q.3619 v.1. The stage 3 description respects the requirements to several network entities and also to requirements regarding end devices. Therefore several interfaces (reference points) are addressed to satisfy the test of the different entities. Theref
21、ore to test the appropriate entities the configurations below is applicable: Testing of the network: This entity is responsible to perform the service. In case only the Gm interface is accessible this shall be used instead. In this case, be aware that the verification of several requirements is impe
22、ded, see Figure 5-1. Rec. ITU-T Q.4003.2 (02/2016) 3 Figure 5-1 Applicable interfaces to test using the (generic) NNI interface 6 Test purposes (TP) 6.1 Introduction For each test requirement a TP is defined. 6.1.1 TP naming convention Test purposes (TPs) are numbered, starting at 001, within each g
23、roup. Groups are organized according to the test suite structure (TSS). Additional references are added to identify the actual test suite and whether it applies to the network or the user (see Table 2). Table 2 TP identifier naming convention scheme Identifier: _ = supplementary service: e.g. “CH“ =
24、 type of IUT: U User N Network = group 2 digit field representing group reference according to TSS = sequential number (001-999) 6.1.2 Test strategy As the base standard ITU-T Q.3619 v.1 contains no explicit requirements for testing, the TPs were generated as a result of an analysis of the base stan
25、dard and the protocol implementation conformance statement (PICS) specification Recommendation ITU-T Q.4003.1 v.1. 6.2 Network TPs for HOLD All PICS items referred to in this clause are as specified in ITU-T Q.4003.1 v.1 unless indicated otherwise by another numbered reference. 4 Rec. ITU-T Q.4003.2
26、 (02/2016) TSS Network TP CH_N01_001 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.3/1 Test purpose: Session hold in the early dialogue. The media streams were previously set to sendrecv. Ensure that the SUT transfers the HOLD request in an early dialogue. The 200 OK
27、response contains an SDP body with an attribute line indicating a=recvonly. Precondition: An early dialogue was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to sendrecv The originating party sets the session on HOLD
28、Comments: Test Equipment (Gm) SUT Test Equipment (Gm) Establish an early dialogue UPDATE(sendonly) UPDATE(sendonly) 200 OK (recvonly) 200 OK (recvonly) Apply post test routine TSS Network TP CH_N01_002 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.3/1 Test purpose: Se
29、ssion retrieval in the early dialogue. The media streams were previously set to sendrecv. Ensure that the SUT transfers the HOLD request in an early dialogue. The 200 OK response contains an SDP body with an attribute line indicating a=sendrecv. Precondition: An early dialogue was established betwee
30、n the served user and a remote user according to the basic Call procedures The media stream was previously set to sendonly The originating party retrieves the session Comments: Test Equipment (Gm) SUT Test Equipment (Gm) Establish an early dialogue UPDATE(sendonly) UPDATE(sendonly) 200 OK (recvonly)
31、 200 OK (recvonly) UPDATE(sendrecv) UPDATE(sendrecv) 200 OK (sendrecv) 200 OK (sendrecv) Apply post test routine Rec. ITU-T Q.4003.2 (02/2016) 5 TSS Network TP CH_N01_003 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.3/1 Test purpose: Session set on HOLD in the early
32、dialogue. Retrieval in the confirmed dialogue. Ensure that the SUT transfers the HOLD request in an early dialogue and the rerival in the conformed dialogue. The 200 OK response contains an SDP body with an attribute line indicating a=sendrecv. Precondition: An early dialogue was established between
33、 the served user and a remote user according to the basic Call procedures The media stream was previously set to sendonly in the early dialogue The terminating user confirms the dialogue. The originating party retrieves the session Comments: Test Equipment (Gm) SUT Test Equipment (Gm) Establish an e
34、arly dialogue UPDATE(sendonly) UPDATE(sendonly) 200 OK (recvonly) 200 OK (recvonly) 200 OK (recvonly) 200 OK (recvonly) ACK ACK CASE A INVITE(sendrecv) CASE a 200 OK (sendrecv) INVITE(sendrecv) ACK 200 OK (sendrecv) ACK CASE b UPDATE(sendrecv) 200 OK (sendrecv) CASE B UPDATE(sendrecv) CASE a 200 OK
35、(sendrecv) UPDATE(sendrecv) 200 OK (sendrecv) CASE b INVITE(sendrecv) 200 OK (sendrecv) ACK Apply post test routine 6 Rec. ITU-T Q.4003.2 (02/2016) TSS Network TP CH_N01_004 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression Test purpose: Session hold in a confirmed dialogue. The
36、 media streams were previously set to sendrecv. Ensure that the SUT transfers the HOLD request from the originating party in a confirmed dialogue. The 200 OK response containing an SDP body with an attribute line indicating a=recvonly. Precondition: A confirmed dialogue was established between the s
37、erved user and a remote user according to the basic Call procedures The media stream was previously set to sendrecv The originating party sets the session on HOLD Comments: Test Equipment (Gm) SUT Test Equipment (Gm) Establish a confirmed dialogue CASE A INVITE(sendonly) CASE a 200 OK (recvonly) INV
38、ITE(sendonly) ACK 200 OK (recvonly) ACK CASE b UPDATE(sendonly) 200 OK (recvonly) CASE B UPDATE(sendonly) CASE a 200 OK (recvonly) UPDATE(sendonly) 200 OK (recvonly) CASE b INVITE(sendonly) 200 OK (recvonly) ACK Apply post test routine Rec. ITU-T Q.4003.2 (02/2016) 7 TSS Network TP CH_N01_005 HOLD r
39、eference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression Test purpose: Session hold in a confirmed dialogue. The media streams were previously set to sendrecv. Ensure that the SUT transfers the HOLD request from the terminating party in aconfirmed dialogue. The 200 OK response containing an
40、SDP body with an attribute line indicating a=recvonly. Precondition: A confirmed dialogue was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to sendrecv The terminating party sets the session on HOLD Comments: Test Equ
41、ipment (Gm) SUT Test Equipment (Gm) Establish a confirmed dialogue CASE A CASE a INVITE(sendonly) INVITE(sendonly) 200 OK (recvonly) 200 OK (recvonly) ACK ACK CASE b UPDATE(sendonly) 200 OK (recvonly) CASE B CASE a UPDATE(sendonly) UPDATE(sendonly) 200 OK (recvonly) 200 OK (recvonly) CASE b INVITE(s
42、endonly) 200 OK (recvonly) ACK Apply post test routine 8 Rec. ITU-T Q.4003.2 (02/2016) TSS Network TP CH_N01_006 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression Test purpose: Retrieve the session in a confirmed dialogue. The media streams were previously set to sendonly. Ensur
43、e that the SUT is able to support the retrieval of a hold session. The session was previous set on HOLD by the originating party. The originating party sends an INVITE or UPDATE request. The a attribute in the SDP is set to sendrecv or this attribute is absent. Precondition: A confirmed dialogue was
44、 established between the served user and a remote user according to the basic Call procedures The media stream was previously set to sendonly HOLD requested by the originating party The originating party retrieves the held session Comments: Test Equipment (Gm) SUT Test Equipment (Gm) Establish a con
45、firmed dialogue Session on HOLD by the originating party CASE A INVITE(sendrecv) CASE a 200 OK (sendrecv) INVITE(sendrecv) ACK 200 OK (sendrecv) ACK CASE b UPDATE(sendrecv) 200 OK (sendrecv) CASE B UPDATE(sendrecv) CASE a 200 OK (sendrecv) UPDATE(sendrecv) 200 OK (sendrecv) CASE b INVITE(sendrecv) 2
46、00 OK (sendrecv) ACK Apply post test routine Rec. ITU-T Q.4003.2 (02/2016) 9 TSS Network TP CH_N01_007 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression Test purpose: Retrieve the session in a confirmed dialogue. The media streams were previously set to sendonly. Ensure that the
47、 SUT is able support the retrieval of a hold session. The session was previous set on HOLD by the terminating party. The terminating party sends an INVITE or UPDATE request. The a attribute in the SDP is set to sendrecv or this attribute is absent. Precondition: A confirmed dialogue was established
48、between the served user and a remote user according to the basic Call procedures The media stream was previously set to sendonly HOLD requested by the terminating party The terminating party retrieves the held session Comments: Test Equipment (Gm) SUT Test Equipment (Gm) Establish a confirmed dialogue Session on HOLD by the terminating party CASE A CASE a INVITE(sendrecv) INVITE(sendrecv) 200 OK (sendrecv) 200 OK (sendrecv) ACK ACK CASE b UPDATE(sendrecv) 200 OK (sendrecv) CASE B C
