1、ITU-T RECMN*X.248 95 m 4862593 Ob13302 770 INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU DATA NETWORKS AND OPEN SYSTEM COMMUNICATIONS PICS PROFORMAS OPEN SYSTEMS INTERCONNECTION - X.248 (1 1/95) INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - REL
2、IABLE TRANSFER: PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT (PICS) PROFORMA ITU-T Recommendation X.248 (Previously “CCITT Recommendation”) ITU-T RECHN*Xm24B 95 4862591 Ob13103 607 = FOREWORD I (Intemational Telecommunication Union) is the United Nations Specialized Agency in the field of telecommu
3、nications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. Some 179 member countries, 84 telecom operating entities, 145 scientific and industrial organizations and 38 international organizations participate in ITU-T which is the body which sets world teleco
4、mmunications standards (Recommendations). The approval of Recommendations by the Members of ITU-T is covered by the procedure laid down in WTSC Resolution No. 1 (Helsinki, 1993). In addition, the World Telecommunication Standardization Conference (WTSC), which meets every four years, approves Recomm
5、endations submitted to it and establishes the study programme for the following period. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with IS0 and IEC. The text of IT-T Recommendation X.248 was approved on 21st
6、 of November 1995. The identical text is also published as ISOIIEC International Standard 9066-3. NOTE In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. O ITU 1996 All rights reserved
7、. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU, except as noted in footnote I) in Annex A. ITU-T RECMN*Xm24B 95 4862591 Ob13104 543 Services and Facili
8、ties X.1-X.19 Interfaces X.20-X.49 ITU-T X-SERIES RECOMMENDATIONS DATA NETWORKS AND OPEN SYSTEM COMMUNICATIONS Transmission, Signalling and Switching Network Asuects (February 1994) X.50-X.89 X.90-X.149 ORGANIZATION OF X-SERIES RECOMMENDATIONS Administrative Arrangements OPEN SYSTEMS INTERCONNECTION
9、 I Subiect area I Recommendation Series i X. 180-X. 199 I PUBLIC DATA NETWORKS I I Model and Notation Service Definitions x.200-x.209 X.210-X.219 Connection-mode Protocol Specifications Connectionless-mode Protocol Specifications I Maintenance I X.150-X.179 I X.220-X.229 X.230-X.239 PICS Proformas P
10、rotocol Identification Security Protocols X.240-X.259 X.260-X.269 X.270-X.279 Layer Managed Objects Conformance Testing X.280-X.289 X.290-X.299 General Mobile Data Transmission Systems I INTERWORKING BETWEEN NETWORKS I I X.300-X.349 X.350-X.369 Management MESSAGE HANDLING SYSTEMS X.370-X.399 X.400-X
11、.499 X.500-X.599 DIRECTORY OS1 NETWORKING AND SYSTEM ASPECTS Networking Naming, Addressing and Registration Abstract Syntax Notation One (ASN.l) OS1 MANAGEMENT SECURITY X. 600-X. 649 X.650-X.679 X.680-X.699 x.700-x.799 X.800-X.849 OS1 APPLICATIONS Commitment, Concurrency and Recovery Transaction Pro
12、cessing X.850-X.859 X.860-X.879 Remote Operations OPEN DISTRIBUTED PROCESSING X.880-X. 899 x.900-x.999 CONTENTS Summary . Introduction . 1 Scope 2 Normative references . 2.1 Identical Recommendations I International Standards 2.2 Paired Recommendations I International Standards equivalent in technic
13、al content 2.3 Additional references 3 Definitions 4 Abbreviations . 5 Conformance Annex A - PICS proforma for the reliable transfer protocol A . 1 A.2 A.3 A.4 AS A.6 Identification of PICS proforma corrigenda . Purpose and structure of the proforma Symbols. terms and abbreviations A.2.2.1 Introduct
14、ion . A.2.2.2 Prerequisite notation . A.2.2.3 Item numbering . A.2.2.4 Status column A.2.2.5 Support column . A.2.2.6 Definition of support . A.2.2.7 Constraints for supported values . A.2.2.8 Mode or Note column . A.2.2.9 Clause reference column . A.2.2.10 Abbreviations Instnictions A.2.1 A.2.2 A.2
15、.3 Instructions for completion . Identification of the implementation . A.3.1 Date of statement A.3.2 Identification of the implementation andlor system A.3.3 Identification of the system supplier andlor test laboratory client Protocol identification . A.4.1 CCIT Rec . X.228 I ISOLEC 9066-2 protocol
16、 specification and amendments implemented A.4.2 CCJT Rec . X.228 I ISO/IEC 9066-2 technical corrigenda implemented Global statement of conformance . Capabilities and options A.6.2 Major capabilities Supported Modes of Operation . Timers and protocol parameters A.6.4 Supported RSTE PDUs . A.6.1 Initi
17、atorResponder capability . A.6.2.1 A.6.2.2 Supported Dialogue Mode A.6.2.3 Elements of procedure A.6.3.1 Timers . A.6.3.2 Protocol parameters Supported RTSE PDU parameters A.6.5.1 RTORQapdu parameters . A.6.5.2 RTOACapdu parameters . A.6.5.3 RTORJapdu parameters A.6.3 A.6.5 A.6.5.4 RTTPapdu paramete
18、rs . A.6.5.5 R“Rapdu parameters A.6.5.6 RTTBapdu parameters ITU-T Rec . X.248 (1995 E) Page . 111 iii 1 1 1 1 2 2 2 2 3 3 3 3 3 3 4 4 4 5 5 5 5 5 6 6 6 6 6 7 7 7 7 8 8 8 8 8 8 9 9 9 9 10 10 10 11 11 12 12 12 1 11 . . . ITU-T RECMN*X=248 95 D 4862593 ObL3LOb 31ib = A.6.6 Negotiation capabilities . A.
19、6.8 Other information A.7 Multi-layer dependencies A.7.1 Upper layers A.7.2 Lower layers A.7.2.1 ACSE A.1.2.2 Presentation . A.7.2.3 Session A.6.7 Protocol error handling . ITU-T Rec . X.248 (1995 E) Page 12 13 13 13 13 14 14 14 14 ITU-T RECMN*X=248 95 m 4862591 OhL3LO7 252 Summary This Recommendati
20、on I International Standard provides the Protocol Implementation Conformance Statement (PICS) proforma for the Reliable Transger protocol specified in Recommendation X.228 (1988). The PICS proforma presents in tabular form the mandatory and optional elements of the Reliable Transfer protocol. Introd
21、uction This Recommendation 1 International Standard is one of a set of Recommendations I International Standards produced to facilitate the interconnection of information processing systems. It is related to other Recommendations and International Standards in the set as defined by the Reference Mod
22、el for Open Systems Interconnection (see IT-T Rec. X.200 I ISO/IEC 7498-1). The Reference Model subdivides the area of standardization for interconnection into a series of layers of specification, each of manageable size. The goal of Open Systems Interconnection is to allow, with a minimum of techni
23、cal agreement outside the interconnection standards, the interconnection of information processing systems: - from different manufacturers; - under different managements; - - of different technologies. of different levels of complexity; and The Reliable Transfer Service Element (RTSE) is an applicat
24、ion-service-element commonly used by a number of applications. RTSE provides for the reliable transfer of Application Protocol Data Units (APDUs) between open systems. It provides an application-independent mechanism to recover from communication and end-system failure minimizing the amount of retra
25、nsmission. To evaluate the conformance of a particular implementation, it is necessary to have a description of the capabilities and options which have been implemented. Such a description is called a Protocol Implementation Conformance Statement (PICS). This Recommendation I International Standard
26、includes the PICS proforma for the reliable transfer protocol as defined in CCITT Rec. X.228 (1988) I ISO/IEC 9066-2:1989. . ITU-T Rec. X.248 (1995 E) 111 ITU-T RECMN*X=248 95 W 4862591 Ob13108 277 W - ITU-T RECMN*X.248 95 48b2591 ObL3L09 025 ISO/IEC 9066-3 : 1996 (E) INTERNATIONAL STANDARD ITU-T RE
27、COMMENDATION INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - RELIABLE TRANSFER: PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT (PICS) PROFORMA 1 Scope This Recommendation I Internationai Standard provides the Protocol Implementation Conformance Statement (PICS) proforma for the Reliable Trans
28、fer protocol specified in CCITT Rec. X.228 (1988) I ISOEC 9066-2:1989. This PICS proforma is in compliance with the relevant requirements, and in accordance with the relevant guidance given in IT-T Rec. X.296 I ISO/IEC 9646-7. Detail of the use of this proforma is provided in this Recommendation I I
29、nternational Standard. The supplier of an implementation which is claimed to conform to CCIIT Rec. X.228 I ISOAEC 9066-2 is required to complete a copy of the PICS proforma provided in Annex A, and is required to provide the information necessary to identi both the supplier and the implementation. 2
30、 Normative references The following Recommendations and International Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation I International Standard. At the time of publication, the editions indicated were valid. All Recommendations and Stan
31、dards are subject to revision, and the parties to agreements based on this Recommendation I International Standard are encouraged to investigate the possibility of applying the most recent edition of the Recommendations and Standards listed below. Members of IEC and IS0 maintain registers of current
32、ly valid International Standards. The Telecommunication Standardization Bureau of the ITLJ maintains a list of currently valid IT-T Recommendations. 2.1 Identical Recommendations I International Standards - ITU-T Recommendation X.200 (1994) I ISO/IEC 7498- 1 : 1994, Information technology - Open Sys
33、tems Interconnection - Basic Reference Model: The Basic Model. 2.2 Paired Recommendations I International Standards equivalent in technical content - ITU-T Recommendation X.2 18 (1993), Reliable transfer: Model and service definirion. ISOAEC 9066-1: 1989, Information processing systems - Text commun
34、ication - Reliable Transfer - Part I: Model and service definition. CCIT Recommendation X.228 (1988), Reliable transfer: Protocol specijication. ISO/IEC 9066-2: 1989, Information processing sysrems - Text communication - Reliable Transfer - Part 2: Protocol specification. ITU-T Recommendation X.290
35、(1993, OS1 conformance testing methodology and framework for protocol Recommendations for 1TU-T applications - General concepts. ISODEC 9646- 1 : 1994, Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Pan I: General concepts. - - ITU-T Rec. X.24
36、8 (1995 E) 1 ITU-T RECMN*X-248 95 4862591 ObL31LO 847 ISO/lEC 9066-3 : 1996 (E) - ITU-T Recommendation X.296 (1993, OSI conformance testing methodology and framework for protocol Recommendations for ITU-T applications - Implementation conformance statements. ISO/IEC 9646-7: 1995, Informution technol
37、ogy - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements. CCITT Recommendation X.419 (1992). Message handling system - Protocol specijcations. ISOEC 10021-6: 1990, Information technology - Text communication - Message-Oriented
38、 Text Interchange Systems (MOTIS) - Part 6: Protocol specijcations. - 2.3 Additional references - - - CCIIT Recommendation X.482 (1996), Messaging handling systems - PI Protocol PICS proforma. CCIIT Recommendation X.483 (1996), Messaging handling systems - P3 Protocol PICS proforma. CCITT Recommenda
39、tion X.484 (1996), Messaging handling systems - P7 Protocol PICS proforma. 3 Definitions This Recommendation I International Standard makes use of the following terms defined in IT-T Rec. X.290 I ISO/zEC 9646-1: a) Implementation Conformance Statement; b) Implementation Conformance Statement proform
40、a; c) d) PICS proforma. Protocol Implementation Conformation Statement (PICS); and This Recommendation I International Standard makes use of the following terms defined in CCIT Rec. X.419 I ISOAEC 10021-6: a) mts-transfer; b) mts-transfer-protocol; c) mts-transfer-protocol- 1984; d) mts-reliable-acc
41、ess; e) mts-forced-reliable-access; and 0 ms-reliable-access. 4 Abbreviations For the purposes of this Recommendation I International Standard, the following abbreviations apply: ICs Implementation Conformance Statement PICS Protocol Implementation Conformance Statement 5 Conformance A conforming PI
42、CS proforma shall be technically equivalent to the ITU-T I ISO/IEC published PICS proforma and shall preserve the numbering and ordering of the items in the IT-T I ISOAEC PICS proforma. A PICS which conforms to this Recommendation I International Standard shall: a) b) c) describe an implementation w
43、hich conforms to CCIIT Rec. X.228 I ISO/iEC 9066-2; be a confirming PICS proforma, which has been completed in accordance with the instruction for completion given in A.2; include the information necessary to uniquely identify both the supplier and the implementation. 2 ITU-T Rec. X.248 (1995 E) ITU
44、-T RECMN*X.Z+ 95 W 4b2591 Ob131ii1 783 ISO/IEC 9066-3 : 1996 (E) 2 3 Annex A con.: com.: PICS proforma for the reliable transfer protocol) (This annex forms an integral part of this Recommendation I International Standard) 4 A.l The supplier of the PICS proforma shall identify any comgenda (Le. Tech
45、nical Comgenda or equivalent) to the published proforma that have been applied. Suppliers of the proforma should modify the proforma, or attach relevant additional pages in order to apply the corrigenda, and then record the application of the corrigenda in the table below. Identification of PICS pro
46、forma corrigenda Implementors Guide version: 1 I 1 I com.: A.2 Instructions A.2.1 The purpose of this PICS proforma is to provide suppliers of implementations of CCITT Rec. X.228 I ISOIIEC 9066-2 with a consistent means of stating which capabilities have been implemented. The proforma is in the form
47、 of a questionnaire and consists of a set of items. An item is provided for each capability for which an implementation choice is allowed. Items are also provided for major mandatory capabilities for which no implementation choice is allowed. Each item includes an item number, an item description, a
48、 status value specifying the support requirement, and room for a support answer to be provided by the supplier. This subclause provides general information and instructions for completion of the proforma. Purpose and structure of the proforma Subclause A.3 is for identification of the implementation
49、. Subclause A.4 contains the means of specifying, at a high level, the protocol and corrigenda that have been implemented. Subclause AS contains the global statement of conformance. Subclauses A.6 onwards contain tables in which the supplier specifies details of the implementation options chosen. A.2.2 Symbols, terms and abbreviations A.2.2.1 Introduction Notations have been introduced in order to reduce the size of tables in the PICS proforma. These have allowed the use of multi-column layout where the columns are
