1、INTERNATIONAL TELECOMMUNICATION UNION)45G134 !MENDMENTG0G0 TELECOMMUNICATION 8 STANDARDIZATION SECTOROF ITU (04/95)$!4!G0G0.%47/2+3G0G0!.$/0%.G0G03934%-G0G0#/-5.)#!4)/.3/3)G0G0-!.!%-%.4).“b) protocol implementation conformance statement;“c) system conformance statement.”ISO/IEC 10164-2 : 1993/Amd.1
2、: 1995 (E)2 ITU-T Rec. X.731 (1992)/Amd.1 (1995 E)6) Renumber 3.8 as 3.9 and insert the following new subclause:“3.8 Implementation conformance statement proforma definitionsThis Recommendation | International Standard makes use of the following terms defined in ITU-T Rec. X.724 |ISO/IEC 10165-6:a)
3、Managed Relationship Conformance Statement (MRCS);b) Management Conformance Summary (MCS);c) MCS proforma;d) MRCS proforma.”7) Add the following abbreviations to clause 4:“ICS Implementation Conformance Statement“MCS Management Conformance Summary“MICS Management Information Conformance Statement“MI
4、DS Management Information Definition Statement“MOCS Managed Object Conformance Statement“MRCS Managed Relationship Conformance Statement“PICS Protocol Implementation Conformance Statement”8) Replace clause 13 with the following:“13 ConformanceImplementations claiming to conform to this Recommendatio
5、n | International Standard shall comply with theconformance requirements as defined in the following subclauses.13.1 Static conformanceThe implementation shall conform to the requirements of this Recommendation | International Standard in the managerrole, the agent role, or both roles. A claim of co
6、nformance to at least one role shall be made in Table A.1.If a claim of conformance is made for support in the manager role, the implementation shall support at least thenotification or one of the management operations specified in this Recommendation | International Standard. Theconformance require
7、ments in the manager role for those management operations and notification are specified inTable A.3 and further tables referenced by Annex A.If a claim of conformance is made for support in the agent role, the implementation shall support at least one of theattributes, attribute group, notification
8、 identified in Table A.4. The conformance requirements in the agent role arespecified in Annex A and further tables referenced by Annex A.The implementation shall support the transfer syntax derived from the encoding rules specified in CCITT Rec. X.209 |ISO/IEC 8825 named joint-iso-ccitt asn1(1) bas
9、icEncoding(1) for the abstract data types referenced by the definitionsfor which support is claimed.NOTE Prior to the publication of this amendment, this Recommendation | International Standard identified general anddependent conformance classes. A claim of conformance similar to general conformance
10、 class can be made by stating support in themanager role, the agent role, or both roles, for object events functional unit in Table A.2. A claim of conformance similar todependent conformance class can be made by stating support for at least one of the items in Tables A.3 or A.4.13.2 Dynamic conform
11、anceImplementations claiming to conform to this Recommendation | International Standard shall support the elements ofprocedure and definitions of semantics corresponding to the definitions for which support is claimed.13.3 Management implementation conformance statement requirementsAny MCS proforma,
12、 MICS proforma, and MOCS proforma which conforms to this Recommendation | InternationalStandard shall be technically identical to the proformas specified in Annexes A, B, and C preserving table numberingand the index numbers of items, and differing only in pagination and page headers.ISO/IEC 10164-2
13、 : 1993/Amd.1 : 1995 (E)ITU-T Rec. X.731 (1992)/Amd.1 (1995 E) 3The supplier of an implementation which is claimed to conform to this Recommendation | International Standard shallcomplete a copy of the management conformance summary (MCS) provided in Annex A as part of the conformancerequirements to
14、gether with any other ICS proformas referenced as applicable from that MCS. An ICS which conforms tothis Recommendation | International Standard shall: describe an implementation which conforms to this Recommendation | International Standard; have been completed in accordance with the instructions f
15、or completion given in ITU-T Rec. X.724 |ISO/IEC 10165-6; include the information necessary to uniquely identify both the supplier and the implementation.Claims of conformance to the management information defined in this Recommendation | International Standard inmanaged object classes defined elsew
16、here shall include the requirements of the MIDS proforma, as specified inAnnex D, in the MOCS for the managed object class. “9) Apply the following change to 11.1.1.1:In the last sentence, replace “11.1.1.1.2” by “11.1.1.2”10) Apply the following change to 11.1.2.1:In the last sentence, replace “11.
17、1.1.2.2” by “11.1.2.2”11) Apply the following changes to Figure 4:Move the incoming arrow head from the left line at the top of the “Busy” block within the “ENABLED” and“UNLOCKED” blocks and place it on the centre line (i.e. the arrow will then show transition from “Idle” to“Busy”).Move the incoming
18、 arrow head from the right line at the tope of the “Active” block within the “ENABLED”and “SHUTTING DOWN” blocks and place it on the left line.ISO/IEC 10164-2 : 1993/Amd.1 : 1995 (E)4 ITU-T Rec. X.731 (1992)/Amd.1 (1995 E)12) Add the following annexes:Annex AMCS proforma3)(This annex forms an integr
19、al part of this Recommendation | International Standard)A.1 IntroductionA.1.1 Purpose and structureThe Management Conformance Summary (MCS) is a statement by a supplier that identifies an implementation andprovides information on whether the implementation claims conformance to any of the listed set
20、 of documents thatspecify conformance requirements to OSI management.The MCS proforma is a document, in the form of a questionnaire that when completed by the supplier of animplementation becomes the MCS.A.1.2 Instructions for completing the MCS proforma to produce an MCSThe supplier of the implemen
21、tation shall enter an explicit statement in each of the boxes provided. Specific instruction isprovided in the text which precedes each table.A.1.3 Symbols, abbreviations and termsFor all annexes of this Recommendation | International Standard, the following common notations, defined in CCITTRec. X.
22、291 | ISO/IEC 9646-2 and ITU-T Rec. X.296 | ISO/IEC 9646-7 are used for the Status column:m Mandatoryo Optionalc Conditionalx Prohibited Not applicable or out of scopeNOTES1 c, m, and o are prefixed by a c: when nested under a conditional or optional item of the same table;2 o may be suffixed by .N
23、(where N is a unique number) for selectable options among a set of status values. Supportof at least one of the choices (from the items with the same values of N) is required.For all annexes of this Recommendation | International Standard, the following common notations, defined in CCITTRec. X.291 |
24、 ISO/IEC 9646-2 and ITU-T Rec. X.296 | ISO/IEC 9646-7 are used for the Support column:Y ImplementedN Not implemented No answer requiredIg The item is ignored (i.e. processed syntactically but not semantically)A.1.4 Table formatSome of the tables in this Recommendation | International Standard have b
25、een split because the information is too wideto fit on the page. Where this occurs, the index number of the first block of columns are the index numbers of thecorresponding rows of the remaining blocks of columns. A complete table reconstructed from the constituent partsshould have the following lay
26、out:_3)Users of this Recommendation | International Standard may freely reproduce the MCS proforma in this annex so that it can beused for its intended purpose, and may further publish the completed MCS. Instructions for MCS proforma are specified in ITU-TRec. X.724 | ISO/IEC 10165-6.Index First blo
27、ck of columns Second block of columns Etc.ISO/IEC 10164-2 : 1993/Amd.1 : 1995 (E)ITU-T Rec. X.731 (1992)/Amd.1 (1995 E) 5In this Recommendation | International Standard the constituent parts of the table appear consecutively, starting with thefirst block of columns.When a table with sub-rows is too
28、wide to fit on a page, the continuation tables(s) have been constructed with indexnumbers identical to the index numbers in the corresponding rows of the first table, and with sub-index numberscorresponding to the sub-rows within each indexed row. For example, if Table X.1 has 2 rows and the continu
29、ation ofTable X.1 has 2 sub-rows for each row, the tables are presented as follows:Table X.1 TitleTable X.1 (concluded) TitleA complete table reconstructed from the constituent parts should have the following layout:References made to cells within tables shall be interpreted as references within rec
30、onstructed tabled. In the example,above, the reference X.1/1d corresponds to the blank cell in the column G for row with Index 1, and X.1/1.2bcorresponds to the blank cell in column L for row with Sub-index 1.2A.2 Identification of the implementationA.2.1 Date of statementThe supplier of the impleme
31、ntation shall enter the date of this statement in the box below. Use the formatDD-MM-YYYY.SupportIndex A B C D E F G1a b 2a b Index Sub-index H I J K L1 1.1 h i j1.2 h i j2 2.1 h i j2.2 h i jSupportIndex A B C D E F G Sub-index H I J K L1ab1.1 h i j1.2 h i j2ab2.1 h i j2.2 h i jDate of statementISO/
32、IEC 10164-2 : 1993/Amd.1 : 1995 (E)6 ITU-T Rec. X.731 (1992)/Amd.1 (1995 E)A.2.2 Identification of the implementationThe supplier of the implementation shall enter information necessary to uniquely identify the implementation and thesystem(s) in which it may reside, in the box below.A.2.3 ContactThe
33、 supplier of the implementation shall provide information on whom to contact if there are any queries concerning thecontent of the MCS, in the box below.A.3 Identification of the Recommendation | International Standard in which the managementinformation is definedThe supplier of the implementation s
34、hall enter the title, reference number and date of the publication of theRecommendation | International Standard which specifies the management information to which conformance isclaimed, in the box below.A.3.1 Technical corrigenda implementedThe supplier of the implementation shall enter the refere
35、nce numbers of implemented technical corrigenda which modifythe identified Recommendation | International Standard, in the box below.A.3.2 Amendments implementedThe supplier of the implementation shall state the titles and reference numbers of implemented amendments to theidentified Recommendation |
36、 International Standard, in the box below.Recommendation | International Standard to which conformance is claimedISO/IEC 10164-2 : 1993/Amd.1 : 1995 (E)ITU-T Rec. X.731 (1992)/Amd.1 (1995 E) 7A.4 Management conformance summaryThe supplier of implementation shall state the capabilities and features s
37、upported and provide summary of conformanceclaims to Recommendations | International Standards using the tables in this annex.The supplier of the implementation shall specify the roles that are supported, in Table A.1.Table A.1 RolesThe supplier of the implementation shall specify support for the sy
38、stems management functional units in Table A.2.Table A.2 Systems management functional unitThe supplier of the implementation shall specify support for management information in the manager role, in Table A.3.Table A.3 Manager role minimum conformance requirementIndex Roles supported Status Support
39、Additional information1 Manager role support o.12 Agent role support o.1Manager AgentIndex CapabilityStatus Support Status SupportAdditional information1 state change reporting functional unit c1 c2c1: if A.1/1a then o else .c2: if A.1/2a then o else .Index Item Status Support Additional information
40、1 Operations on generic state attributes and attributegroupc32 State change notification c43 Operations on managed objects c3c3: if A.2/1a then o else (if A.1/1a then o.2 else ).c4: if A.2/1a then m else (if A.1/1a then o.2 else ).ISO/IEC 10164-2 : 1993/Amd.1 : 1995 (E)8 ITU-T Rec. X.731 (1992)/Amd.
41、1 (1995 E)The supplier of the implementation shall specify support for management information in the agent role, in Table A.4.Table A.4 Agent role minimum conformance requirementTable A.5 Logging of event recordsNOTE 1 Conformance to this Recommendation | International Standard does not require conf
42、ormance to CCITTRec. X.735 | ISO/IEC 10164-6.The supplier of the implementation shall provide information on claims of conformance to any of the Recommendation |International Standards summarized in Tables A.6 to A.9. For each Recommendation | International Standard that thesupplier of the implement
43、ation claims conformance to, the corresponding conformance statement(s) shall be completed,or referenced by, the MCS. The supplier of the implementation shall complete the Support, Table numbers andAdditional information columns.In Tables A.6 to A.9 the Status column is used to indicate whether the
44、supplier of the implementation is required tocomplete the referenced tables or referenced items. Conformance requirements are as specified in the referenced tablesor referenced items and are not changed by the value of the MCS Status column. Similarly, the Support column is usedby the supplier of th
45、e implementation to indicate completion of the referenced tables or referenced items.NOTE 2 Conformance to the MAPDUs defined in this Recommendation | International Standard can be claimed bycompleting the corresponding tables in the MICS and MOCS annexes of the referenced Recommendations | Internat
46、ional Standards.Index Item Status Support Table reference Additional information1 operationalState attribute c52 usageState attribute c53 administrativeState attribute c54 alarmStatus attribute c55 proceduralStatus attribute c56 availabilityStatus attribute c57 controlStatus attribute c58 standbySta
47、tus attribute c59 unknownStatus attribute c510 state attribute group c511 State change notification c612 state change record managed object class c7 c5: if A.2/1b then o else (if A.1/2a then o.3 else ).c6: if A.2/1b then m else (if A.1/2a then o.3 else ).c7: if A.4/11a and A.5/1a then m else .NOTE T
48、he Table reference column in this table is the notification, attributes, or attribute group table reference of the MOCSsupplied by the supplier of the managed object which claims to import the notification or attribute from this Recommendation |International Standard.Index Status SupportAdditionalin
49、formation1 Does the implementation support logging of event records in agent role? c8c8: if A.1/2a then o else .ISO/IEC 10164-2 : 1993/Amd.1 : 1995 (E)ITU-T Rec. X.731 (1992)/Amd.1 (1995 E) 9Table A.6 PICS support summaryTable A.7 MOCS support summaryTable A.8 MRCS support summaryTable A.9 MICS support summaryIndexIdentification of thedocument thatincludes thePICS proformaTable numbersof PICSproformaDescriptionConstraintsand valuesStatus SupportTablenumbers ofPICSAdditionalinformation1 CCITT Rec. X.730 |ISO/IEC, 101
