1、INTERNATIONAL TELECOMMUNICATION UNION)45G134 !MENDMENTG0G0 TELECOMMUNICATION 8 STANDARDIZATION SECTOROF ITU (04/95)$!4!G0G0.%47/2+3G0G0!.$/0%.G0G03934%-G0G0#/-5.)#!4)/.3/3)G0G0-!.!%-%.4).b) protocol implementation conformance statement;c) system conformance statement.”ISO/IEC 10164-3 : 1993/Amd.1 19
2、95 (E)2 ITU-T Rec. X.732 (1992)/Amd.1 (1995 E)6) Renumber 3.8 as 3.9 and insert the following new subclause:“3.8 Implementation conformance statement proforma definitionsThis Recommendation | International Standard makes use of the following terms defined in ITU-T Rec. X.724 |ISO/IEC 10165-6:a) Mana
3、ged Relationship Conformance Statement (MRCS);b) Management Conformance Summary (MCS);c) MCS proforma;d) MRCS proforma.”7) Add the following abbreviations to clause 4:“ICS Implementation Conformance StatementMCS Management Conformance SummaryMICS Management Information Conformance StatementMIDS Mana
4、gement Information Definition StatementMOCS Managed Object Conformance StatementMRCS Managed Relationship Conformance StatementPICS Protocol Implementation Conformance Statement”8) Replace clause 13 with the following:“13 ConformanceImplementations claiming to conform to this Recommendation | Intern
5、ational Standard shall comply with theconformance requirements as defined in the following subclauses.13.1 Static conformanceThe implementation shall conform to the requirements of this Recommendation | International Standard in the managerrole, the agent role, or both roles. A claim of conformance
6、to at least one role shall be made in Table A.1.If a claim of conformance is made for support in the manager role, the implementation shall support at least thenotification or one of the management operations specified in this Recommendation | International Standard. Theconformance requirements in t
7、he manager role for those management operations and notifications are specified inTable A.3 and further tables referenced by Annex A.If a claim of conformance is made for support in the agent role, the implementation shall support at least one of theattributes, attribute group, notification identifi
8、ed in Table A.4. The conformance requirements in the agent role arespecified in Annex A and further tables referenced by Annex A.The implementation shall support the transfer syntax derived from the encoding rules specified in CCITT Rec. X.209 |ISO/IEC 8825 named joint-iso-ccitt asn1(1) basicEncodin
9、g(1) for the abstract data types referenced by the definitionsfor which support is claimed.NOTE Prior to the publication of this amendment, this Recommendation | International Standard identified general and dependentconformance classes. A claim of conformance similar to general conformance class ca
10、n be made by stating support in the manager role, the agent role,or both roles, for object events functional unit in Table A.2. A claim of conformance similar to dependent conformance class can be made by statingsupport for at least one of the items in Tables A.3 or A.4.13.2 Dynamic conformanceImple
11、mentations claiming to conform to this Recommendation | International Standard shall support the elements ofprocedure and definitions of semantics corresponding to the definitions for which support is claimed.ISO/IEC 10164-3 : 1993/Amd.1 1995 (E)ITU-T Rec. X.732 (1992)/Amd.1 (1995 E) 313.3 Managemen
12、t implementation conformance statement requirementsAny MCS proforma, MICS proforma, and MOCS proforma which conforms to this Recommendation | InternationalStandard shall be technically identical to the proformas specified in Annexes A, B, and C preserving table numberingand the index numbers of item
13、s, and differing only in pagination and page headers.The supplier of an implementation which is claimed to conform to this Recommendation | International Standard shallcomplete a copy of the Management Conformance Summary (MCS) provided in Annex A as part of the conformancerequirements together with
14、 any other ICS proformas referenced as applicable from that MCS. An ICS which conforms tothis Recommendation | International Standard shall: describe an implementation which conforms to this Recommendation | International Standard; have been completed in accordance with the instructions for completi
15、on given in ITU-T Rec. X.724 |ISO/IEC 10165-6; include the information necessary to uniquely identify both the supplier and the implementation.Claims of conformance to the management information defined in this Recommendation | International Standard inmanaged object classes defined elsewhere shall
16、include the requirements of the MIDS proforma, as specified inAnnex D, in the MOCS for the managed object class.”9) Apply the following change to 11.1.1.1:In the last sentence, replace “11.1.1.1.2” by “11.1.1.2”10) Apply the following change to 11.1.2.1:In the last sentence, replace “11.1.1.2.2” by
17、“11.1.2.2”11) Add the following annexes:ISO/IEC 10164-3 : 1993/Amd.1 1995 (E)4 ITU-T Rec. X.732 (1992)/Amd.1 (1995 E)Annex AMCS proforma3)(This annex forms an integral part of this Recommendation | International Standard)A.1 IntroductionA.1.1 Purpose and structureThe Management Conformance Summary (
18、MCS) is a statement by a supplier that identifies an implementation andprovides information on whether the implementation claims conformance to any of the listed set of documents thatspecify conformance requirements to OSI management.The MCS proforma is a document, in the form of a questionnaire tha
19、t when completed by the supplier of animplementation becomes the MCS.A.1.2 Instructions for completing the MCS proforma to produce an MCSThe supplier of the implementation shall enter an explicit statement in each of the boxes provided. Specific instruction isprovided in the text which precedes each
20、 table.A.1.3 Symbols, abbreviations and termsFor all annexes of this Recommendation | International Standard, the following common notations, defined in CCITTRec. X.291 | ISO/IEC 9646-2 and ITU-T Rec. X.296 | ISO/IEC 9646-7 are used for the Status column:m Mandatoryo Optionalc Conditionalx Prohibite
21、d Not applicable or out of scopeNOTES1 c, m, and o are prefixed by a c: when nested under a conditional or optional item of the same table;2 o may be suffixed by .N (where N is a unique number) for selectable options among a set of status values.Support of at least one of the choices (from the items
22、 with the same values of N) is required.For all annexes of this Recommendation | International Standard, the following common notations, defined in CCITTRec. X.291 | ISO/IEC 9646-2 and ITU-T Rec. X.296 | ISO/IEC 9646-7 are used for the Support column:Y ImplementedN Not implemented No answer required
23、Ig The item is ignored (i.e. processed syntactically but not semantically)A.1.4 Table formatSome of the tables in this Recommendation | International Standard have been split because the information is too wideto fit on the page. Where this occurs, the index number of the first block of columns are
24、the index numbers of thecorresponding rows of the remaining blocks of columns. A complete table reconstructed from the constituent partsshould have the following layout:_3)Users of this Recommendation | International Standard may freely reproduce the MCS proforma in this annex so that it can beused
25、for its intended purpose, and may further publish the completed MCS. Instructions for completing the MCS proforma arespecified in ITU-T Rec.X.724 | ISO/IEC 10165-6.Index First block of columns Second block of columns Etc.ISO/IEC 10164-3 : 1993/Amd.1 1995 (E)ITU-T Rec. X.732 (1992)/Amd.1 (1995 E) 5In
26、 this Recommendation | International Standard the constituent parts of the table appear consecutively, starting with thefirst block of columns.When a table with sub-rows is too wide to fit on a page, the continuation tables(s) have been constructed with indexnumbers identical to the index numbers in
27、 the corresponding rows of the first table, and with sub-index numberscorresponding to the sub-rows within each indexed row. For example, if Table X.1 has 2 rows and the continuation ofTable X.1 has 2 sub-rows for each row, the tables are presented as follows:Table X.1 TitleTable X.1 (concluded) Tit
28、leA complete table reconstructed from the constituent parts should have the following layout:References made to cells within tables shall be interpreted as references within reconstructed tabled. In the example,above, the reference X.1/1d corresponds to the blank cell in the column G for row with In
29、dex 1, and X.1/1.2bcorresponds to the blank cell in column L for row with Sub-index 1.2A.2 Identification of the implementationA.2.1 Date of statementThe supplier of the implementation shall enter the date of this statement in the box below. Use the formatDD-MM-YYYY.SupportIndex A B C D E F G1ab2abI
30、ndex Sub-index H I J K L11.1 h i j1.2 h i j22.1 h i j2.2 h i jSupportIndex A B C D E F G Sub-index H I J K L1ab1.1 h i j1.2 h i j2ab2.1 h i j2.2 h i jDate of statementISO/IEC 10164-3 : 1993/Amd.1 1995 (E)6 ITU-T Rec. X.732 (1992)/Amd.1 (1995 E)A.2.2 Identification of the implementationThe supplier o
31、f the implementation shall enter information necessary to uniquely identify the implementation and thesystem(s) in which it may reside, in the box below.A.2.3 ContactThe supplier of the implementation shall provide information on whom to contact if there are any queries concerning thecontent of the
32、MCS, in the box below.A.3 Identification of the Recommendation | International Standard in which the managementinformation is definedThe supplier of the implementation shall enter the title, reference number and date of the publication of theRecommendation | International Standard which specifies th
33、e management information to which conformance isclaimed, in the box below.A.3.1 Technical corrigenda implementedThe supplier of the implementation shall enter the reference numbers of implemented technical corrigenda which modifythe identified Recommendation | International Standard, in the box belo
34、w.A.3.2 Amendments implementedThe supplier of the implementation shall state the titles and reference numbers of implemented amendments to theidentified Recommendation | International Standard, in the box below.Recommendation | International Standard to which conformance is claimedISO/IEC 10164-3 :
35、1993/Amd.1 1995 (E)ITU-T Rec. X.732 (1992)/Amd.1 (1995 E) 7A.4 Management conformance summaryThe supplier of implementation shall state the capabilities and features supported and provide summary of conformanceclaims to Recommendations | International Standards using the tables in this annex.The sup
36、plier of the implementation shall specify the roles that are supported, in Table A.1.Table A.1 RolesThe supplier of the implementation shall specify support for systems management functional units in Table A.2.Table A.2 Systems management functional unitThe supplier of the implementation shall speci
37、fy support for management information in the manager role, in Table A.3.Table A.3 Manager role minimum conformance requirementIndex Roles supported Status Support Additional information1 Manager role support o.12 Agent role support o.1Manager AgentIndex Capability Status Support Status Support Addit
38、ional information1 relationship change reporting functional unit c1 c2c1: if A.1/1a then o else .c2: if A.1/2a then o else .Index Item Status Support Additional information1 Operations on generic relationship attributes and attributegroupc32 Relationship change notification c43 Operations on managed
39、 objects c3c3: if A.2/1a then o else (if A.1/1a then o.2 else ).c4: if A.2/1a then m else (if A.1/1a then o.2 else ).ISO/IEC 10164-3 : 1993/Amd.1 1995 (E)8 ITU-T Rec. X.732 (1992)/Amd.1 (1995 E)The supplier of the implementation shall specify support for management information in the agent role, in
40、Table A.4.Table A.4 Agent role minimum conformance requirementTable A.5 Logging of event recordsNOTE Conformance to this Recommendation | International Standard does not require conformance to CCITTRec. X.735 | ISO/IEC10164-6.The supplier of the implementation shall provide information on claims of
41、conformance to any of the Recommendation |International Standards summarized in Tables A.6 to A.9. For each Recommendation | International Standard that thesupplier of the implementation claims conformance to, the corresponding conformance statement(s) shall be completed,or referenced by, the MCS. T
42、he supplier of the implementation shall complete the Support, Table numbers andAdditional information columns.In Tables A.6 to A.9 the Status column is used to indicate whether the supplier of the implementation is required tocomplete the referenced tables or referenced items. Conformance requiremen
43、ts are as specified in the referenced tablesor referenced items and are not changed by the value of the MCS Status column. Similarly, the Support column is usedby the supplier of the implementation to indicate completion of the referenced tables or referenced items.NOTE Conformance to the MAPDUs def
44、ined in this Recommendation | International Standard can be claimed bycompleting the corresponding tables in the MICS and MOCS annexes of the referenced Recommendations | International Standards.Index Item Status Support Table reference Additional information1 providerObject attribute c52 userObject
45、 attribute c53 peer attribute c54 primary attribute c55 secondary attribute c56 backUpObject attribute c57 backedUpObject attribute c58 member attribute c59 owner attribute c510 relationships attribute group c511 Relationship change notification c612 relationship change record managed object class c
46、7 c5: if A.2/1b then o else (if A.1/2a then o.3 else ).c6: if A.1/1b then m else (if A.1/2a then o.3 else ).c7: if A.4/11a and A.5/1a then m else .NOTE The Table reference column in this table is the notification, attributes, or managed object class table reference of theMOCS supplied by the supplie
47、r of the managed object which claims to import the notification or attribute from thisRecommendation | International Standard.Index Status SupportAdditionalinformation1 Does the implementation support logging of event records in agent role? c8c8: if A.1/2a then o else .ISO/IEC 10164-3 : 1993/Amd.1 1
48、995 (E)ITU-T Rec. X.732 (1992)/Amd.1 (1995 E) 9Table A.6 PICS support summaryTable A.7 MOCS support summaryTable A.8 MRCS support summaryTable A.9 MICS support summaryIndexIdentification of thedocument thatincludes the PICSproformaTablenumbersof PICSproformaDescriptionConstraintsand valuesStatus Sup
49、portTablenumbersof PICSAdditionalinformation1 CCITT Rec. X.730 |ISO/IEC 10164-1Annex Eall tablesSM applicationcontextOBJECTIDENTIFIERmIndexIdentification of thedocument thatincludes the MOCSproformaTablenumbersofMOCSproformaDescriptionConstraintsand valuesStatus SupportTablenumbersofMOCSAdditionalinformation1 CCITT Rec. X.732 |ISO/IEC 10164-3Annex Call tablesrelationship changerecordc9c9: if A.4/12a then m else .IndexIdentification of thedocument thatincludes the MRCSproformaTablenumbersofMRCSproformaDescriptionCo
