JCS 4425-2006 600V EM-united cables for branch-circuits 《支路用600V EM装配电缆》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD SK-M99G9513-B-2006 HEAT BARRIER MAT GLASS FIBER BASE TO BE USED WITH FORD WSS-M99P1111-A (Shown on SK-M99G9513-A)《玻璃纤维基热屏障垫 与标准FORD WSS-M99P1111-A一起使用 列于标准SK-M99G9513-A上》.pdf

FORD SK-M99G9517-A-2006 DEADENER SHEETING LOW TEMPERATURE FUSIBLE TO BE USED WITH FORD WSS-M99P1111-A 《低温可熔的隔音材料毡 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SK-M99G9517-B-2006 DEADENER SHEETING LOW TEMPERATURE FUSIBLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on SK-M99G9517-A)《低温可熔的隔音材料板 与标准FORD WSS-M99P1111-A一起使用 列于标准SK-M99G.pdf

FORD SK-M99G9518-A-2006 POLYURETHANE FOAM MOLDED PART FOR SOUND ABSORPTION TO BE USED WITH FORD WSS-M99P1111-A 《吸声聚氨酯泡沫模制部件 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SK-M99G9518-B-2006 POLYURETHANE FOAM MOLDED PART FOR SOUND ABSORPTION TO BE USED WITH FORD WSS-M99P1111-A (Shown on SK-M99G9518-A)《吸声聚氨酯泡沫模制件 与标准FORD WSS-M99P1111-A一起使用 列于.pdf

FORD SK-M99G9519-A-2006 SOUND ABSORPTION PART MOLDED TO BE USED WITH FORD WSS-M99P1111-A 《模制吸声部件 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SK-M99G9519-B-2006 SOUND ABSORPTION PART MOLDED TO BE USED WITH FORD WSS-M99P1111-A (Shown on SK-M99G9519-A)《模制吸声部件 与标准FORD WSS-M99P1111-A一起使用 列于标准SK-M99G9519-A上》.pdf

FORD SK-M99G9520-A-2007 MULTI-PLY DEADENER PAD MOLDED ENGINE COMPARTMENT - TO BE USED WITH FORD WSS-M99P1111-A 《发动机舱用模制多层隔音垫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SK-M99G9521-A-2007 DEADENER SHEETING HIGH TEMPERATURE FUSIBLE - TO BE USED WITH FORD WSS-M99P1111-A 《高温可熔隔音板 与标准FORD WSS-M99P1111-A一起使用 》.pdf