1、JEDEC STANDARD Physical Dimensions JESD22-B100B (Revision of JESD22-B100A) JUNE 2003 (Reaffirmed: JUNE 2006, JANUARY 2016) JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE JEDEC standards and publications contain material that has been prepared, reviewed, and approved through the JEDEC Board of Direc
2、tors level and subsequently reviewed and approved by the JEDEC legal counsel. JEDEC standards and publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assist
3、ing the purchaser in selecting and obtaining with minimum delay the proper product for use by those other than JEDEC members, whether the standard is to be used either domestically or internationally. JEDEC standards and publications are adopted without regard to whether or not their adoption may in
4、volve patents or articles, materials, or processes. By such action JEDEC does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the JEDEC standards or publications. The information included in JEDEC standards and publications represents a so
5、und approach to product specification and application, principally from the solid state device manufacturer viewpoint. Within the JEDEC organization there are procedures whereby a JEDEC standard or publication may be further processed and ultimately become an ANSI standard. No claims to be in confor
6、mance with this standard may be made unless all requirements stated in the standard are met. Inquiries, comments, and suggestions relative to the content of this JEDEC standard or publication should be addressed to JEDEC at the address below, or refer to www.jedec.org under Standards and Documents f
7、or alternative contact information. Published by JEDEC Solid State Technology Association 2016 3103 North 10th Street Suite 240 South Arlington, VA 22201-2107 This document may be downloaded free of charge; however JEDEC retains the copyright on this material. By downloading this file the individual
8、 agrees not to charge for or resell the resulting material. PRICE: Contact JEDEC Printed in the U.S.A. All rights reserved PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by JEDEC and may not be reproduced without permission. For information, contact: JEDEC Solid State Technology Associat
9、ion 3103 North 10th Street Suite 240 South Arlington, VA 22201-2107 or refer to www.jedec.org under Standards-Documents/Copyright Information. JEDEC Standard No. 22-B100B Page 1 Test Method B100B (Revision of Test Method B100-A) TEST METHOD B100B PHYSICAL DIMENSIONS (From JEDEC Board Ballot, JCB-02-
10、136, formulated under the cognizance of the JC-14.1 Subcommittee on Reliability Test Methods for Packaged Devices.) 1 Scope The purpose of this test is to determine whether the external physical dimensions of the device, in all package configurations, are in accordance with the applicable procuremen
11、t document. The physical dimensions test is nondestructive and can be employed for evaluations such as lot acceptance, process monitor, and qualification. 2 Apparatus Equipment used in this examination shall include micrometers, calipers, gauges, contour projectors, or other measuring equipment, cap
12、able of determining the actual device dimensions. 3 Procedure Unless otherwise specified, the physical dimensions specified in the case outline drawings shall be measured. Static handling precautions per JESD625 should be observed when handling saleable devices or devices to be used in other reliabi
13、lity tests. 4 Failure criteria Any device that exhibits a dimension or dimensions not in conformance with specified tolerances or limits of applicable drawings shall constitute a failure. JEDEC Standard No. 22-B100B Page 2 Test Method B100B (Revision of Test Method B100-A) 5 Summary The following de
14、tails shall be specified in the applicable procurement documents: a) Case outline drawings. b) Additional measurements, as required. c) Sample size and acceptance number. Standard Improvement Form JEDEC JESD22-B100B The purpose of this form is to provide the Technical Committees of JEDEC with input
15、from the industry regarding usage of the subject standard. Individuals or companies are invited to submit comments to JEDEC. All comments will be collected and dispersed to the appropriate committee(s). If you can provide input, please complete this form and return to: JEDEC Attn: Publications Depar
16、tment 2500 Wilson Blvd. Suite 220 Arlington, VA 22201-3834 Fax: 703.907.7583 1. I recommend changes to the following: Requirement, paragraph number Test method number Paragraph number The referenced paragraph number has proven to be: Unclear Too Rigid In Error Other 2. Recommendations for correction: 3. Other suggestions for document improvement: Submitted by Name: Phone: Company: E-mail:Address: City/State/Zip: Date:
