JEITA ED4912-2008 Light emitting diodes .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D330-A1-2011 IONOMER (ETHYLENE) MOLDING COMPOUND CLEAR TO BE USED WITH FORD WSS-M99P1111-A 《清晰的离聚物(乙烯)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESB-M4D330-A2-2011 IONOMER (ETHYLENE) MOLDING COMPOUND PIGMENTED ZINC TYPE - EXTERIOR GRADE - PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M4D330-A1)《外部级.pdf

FORD ESB-M4D330-A4-2011 IONOMER (ETHYLENE) MOLDING COMPOUND BLACK SODIUM TYPE - EXTERIOR GRADE - NOT PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M4D330-A1)《外.pdf

FORD ESB-M4D330-A5-2011 IONOMER (ETHYLENE) MOLDING COMPOUND FOAMED GLASS FILLED - BLACK - ZINC SODIUM TYPE EXTERIOR GRADE TO BE USED WITH FORD WSS-M99P1111-A 《外部级黑锌 钠型泡沫玻璃填充离聚物(乙.pdf

FORD ESB-M4D330-A6-2011 IONOMER (ETHYLENE) MOLDING COMPOUND GLASS FILLED - BLACK - ZINC SODIUM TYPE - EXTERIOR GRADE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M4D330.pdf

FORD ESB-M4D334-A-2006 POLYPROPYLENE COPOLYMER SELF-EXTINGUISHING TO BE USED WITH FORD WSS-M99P1111-A 《自熄灭型聚丙烯（PP）共聚物 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M4D638-B》.pdf

FORD ESB-M4D338-A-2009 POLYPROPYLENE GLASS REINFORCED - GLASS TO POLYMER CHEMICALLY LINKED-INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《玻璃与聚合物以化学方式联结的以玻璃增强的聚丙烯.pdf

FORD ESB-M4D345-B-2011 POLYPROPYLENE SHEET 40% CONTINUOUS GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《40%连续玻璃纤维增强聚丙烯板 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESB-M4D353-A1-2008 NYLON (TYPE 6 6) MINERAL FILLED - HIGH IMPACT GRADE TO BE USED WITH FORD WSS-M99P1111-A 《矿物填充的高抗冲级尼龙6 6 与标准FORD WSS-M99P1111-A一起使用 》.pdf