JRIS J0721 AMD 1-2013 Rolling stock - Hand straps(Amendment1).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 24 3379-1966 Expanding bushes to mandrels acording to CSN 24 3378《CSN 24 3378带膨胀衬套的心轴》.pdf

CSN 24 3386-1953 Clamping tools Expanding carriers《D 从 130 至 450 mm》.pdf

CSN 24 3398-1968 Adjustable adaptors with indentations《带凹槽的可调适配器》.pdf

CSN 24 3500-1961 Jigs and fixtures for hand clamping of workpieces Survey《工件手动钳拉夹具及接合点 调查》.pdf

CSN 24 3501-1974 Jigs and fixtures for hand clamping of workpieces Technical code《用于工件手动钳夹的夹具及装置器 技术规范》.pdf

CSN 24 3503-1974 Tightening screw ball heads and countersinks《上紧螺钉巴厘封头及钻孔》.pdf

CSN 24 3510-1974 Slotted screws with full dog point《带专用螺丝的有槽螺钉》.pdf

CSN 24 3512-1974 Square head screws wit full dog point《带专用螺丝的正方形封头螺钉》.pdf

CSN 24 3516-1974 Screws with pin handle《带钉销把手的螺钉》.pdf