JUS B A3 001-1982 Mine designation and symbols Symbol mallet and iron 《矿石名称和符号，槌棒和铁的符号》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 21640-1-1993 Air regulating systems in mining pneumatic cylinders for airdoors without pressure reduction dimensions requirement marking《采矿用空气调节系统 非减压风门用压缩气缸 尺寸、要求、标记》.pdf

DIN 2172-1-2013 Reamers - Part 1 Technical specifications for reamers with shank《铰刀 第1部分 带柄铰刀的技术规范》.pdf

DIN 2172-2-2007 Reamers - Part 2 Technical specifications for shell reamers《铰刀 第2部分 套形铰刀的技术规范》.pdf

DIN 2173-2008 Countersinks and counterbores tools with pilot and shank - Technical specifications《带导柱和柄的沉孔钻和沉孔扩孔钻刀具 技术规范》.pdf

DIN 2174-2008 Cold-forming taps for ISO metric coarse pitch thread M2 to M39 and ISO metric fine pitch thread M3 × 0 25 to M52 × 4 - Dimensions《米制ISO粗螺距螺纹M2至M39和米制ISO细螺距螺纹M3×0 25至M.pdf

DIN 2175-1-2015 Cold-forming taps - Part 1 Technical delivery conditions for high-speed steel cold-forming taps《冷成型丝锥 第1部分 高速钢冷成型丝锥的技术交货条件》.pdf

DIN 2175-2-2015 Cold-forming taps - Part 2 Technical delivery conditions for carbide cold-forming taps《冷成型丝锥 第2部分 硬质合金冷成型丝锥的技术交货条件》.pdf

DIN 21772-2012 Gears - Cylindrical involute gears and gear pairs - Definition of deviations《齿轮 圆柱形渐开线齿轮和齿轮副 偏差定义》.pdf

DIN 21773-2014 Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness《齿轮 圆柱形渐开线齿轮和齿轮副 齿厚检测尺寸》.pdf