JUS B E4 172-1987 Laboratory glassvvare andaccessories Boiling flasks with flatbottom short wideneck Quality require-ments《实验室玻璃器皿和附件 平底广口烧瓶的质量要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS9222 REV A VALID NOTICE 3-2001 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED 500-20 UNJF-3A《0 4375-20 UNJF-3A型垫圈顶部钻孔加长双重六边形钢锚杆机.pdf

DLA MS9222 REV A-1988 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED 500-20 UNJF-3A《0 4375-20 UNJF-3A型垫圈顶部钻孔加长双重六边形钢锚杆机》.pdf

DLA MS9223 REV A REINST NOTICE 2-1994 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED 5625-18 UNJF-3A《0 5625-18 UNJF-3A型垫圈顶部钻孔加长双重六边形钢锚.pdf

DLA MS9223 REV A VALID NOTICE 3-2001 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED 5625-18 UNJF-3A《0 5625-18 UNJF-3A型垫圈顶部钻孔加长双重六边形钢锚杆.pdf

DLA MS9223 REV A-1988 BOLT MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED 5625-18 UNJF-3A《0 5625-18 UNJF-3A型垫圈顶部钻孔加长双重六边形钢锚杆机》.pdf

DLA MS9229 REV B-1966 BRACKET - 90 DEG ANGLE AMS 5504 190 X 250 BOLT《AMS 5504型90度0 190 X 250螺栓灯座》.pdf

DLA MS9274 REV B VALID NOTICE 2-2001 WASHER KEY-DOUBLE BEARING RETAINING AMS 5510《AMS 5510型支座固定双键垫圈》.pdf

DLA MS9274 REV B VALID NOTICE 3-2006 WASHER KEY-DOUBLE BEARING RETAINING AMS 5510《AMS 5510型支座固定双键垫圈》.pdf

DLA MS9274 REV B-1972 WASHER KEY-DOUBLE BEARING RETAINING AMS 5510《AMS 5510型支座固定双键垫圈》.pdf