JUS B H8 232-1991 Electrical insulating oils - Method for the detection of corrosive sulphur《电绝缘油 硫腐蚀的检测方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN ISO 18113-1-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1 Terms definitions and general requirements (ISO 18113-1 .pdf

DIN EN ISO 18113-2-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2 In vitro diagnostic reagents for professional use (ISO 1.pdf

DIN EN ISO 18113-3-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3 In vitro diagnostic instruments for professional use (IS.pdf

DIN EN ISO 18113-4-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4 In vitro diagnostic reagents for self-testing (ISO 18113.pdf

DIN EN ISO 18113-5-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5 In vitro diagnostic instruments for self-testing (ISO 18.pdf

DIN EN ISO 18122-2016 Solid biofuels - Determination of ash content (ISO 18122 2015) German version EN ISO 18122 2015《固体生物燃料 灰分含量的测定(ISO 18122-2015) 德文版本EN ISO 18122-2015》.pdf

DIN EN ISO 18123-2016 Solid biofuels - Determination of the content of volatile matter (ISO 18123 2015) German version EN ISO 18123 2015《固体生物燃料 挥发分含量的测定(ISO 18123-2015) 德文版本EEN ISO.pdf

DIN EN ISO 18134-1-2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 1 Total moisture - Reference method (ISO 18134-1 2015) German version EN ISO 181.pdf

DIN EN ISO 18134-2-2017 Solid biofuels - Determination of moisture content - Oven dry method - Part 2 Total moisture - Simplified method (ISO 18134-2 2017) German version EN ISO 18.pdf