JUS B M2 114-1981 Monorails for mining transport boxes《采矿用单轨轨道 运输容器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 01 4203 Za-1990 《捷克国家标准01 4203 公差与RVHP的单个系统 公差列，偏差和基本容差用于规格超过3150毫米》.pdf

CSN 01 4203-1976 Unified system of limits and fits CMEA Tolerance and deviations for sizes above 3150 mm《CMEA极限与配套统一体系 3150mm以上尺寸用公差与偏离度》.pdf

CSN 01 4260-1980 Positional tolerances of axes of holes for fasteners《各部件的可互换性 固定器孔轴位置公差》.pdf

CSN 01 4265-1980 Tolerance zones for plastic parts《塑料部件公差带》.pdf

CSN 01 4270-1977 Interchangeability of parts Angle tolerances《部件可互换性 角公差》.pdf

CSN 01 4275-1981 Interchangeability of parts Cones and cone fits Definitions《椎体零件及配件可互换性 定义》.pdf

CSN 01 4276-1982 System for tolerances and fits for conical assembly《圆锥组装公差与配件系统》.pdf

CSN 01 4315-1970 Recommended ISO Tolerance Classes for Bolts and Nuts Assortment《螺栓与螺母用推荐ISO公差类别 混合物》.pdf

CSN 01 4316-1989 Metric threads Transition fits《公制螺纹 过渡配合》.pdf