JUS B Z2 132-1977 Flexible tubes for ventilation Methods for testing of flammabilitv《通风软管可燃性的试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 3590-1976 Modular units machine tool construction - Spindle units《机床结构的组合件 主轴部件 》.pdf

STAS SR ISO 3599-1996 Vernier callipers reading to 0 1 and 0 05 mm《读数至0.1 和 0.05毫米的游标卡尺 》.pdf

STAS SR ISO 3607-1995 Polyethylene (PE) pipes - Tolerances on outside diameters and wall thicknesses《聚乙烯管材 外径和壁厚极限偏差 》.pdf

STAS SR ISO 3609-1996 Polypropylene (PP) pipes - Tolerances on outside diameters and wall thicknesses《聚丙烯管材 外径和壁厚极限偏差 》.pdf

STAS SR ISO 3611-1995 Micrometer callipers for externai measurement《表面测量的微米卡钳 》.pdf

STAS SR ISO 3655-1994 Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table - General introduction and testing of.pdf

STAS SR ISO 3656-1996 Animal and vegetable fats and oils - Determination of ultraviolet absorbance《动植物脂肪和油 紫外吸光度的测定 》.pdf

STAS SR ISO 3661-1996 End-suction centrifugal pumps Baseplate and installation dimensions《端吸离心泵 地板和安装尺寸 》.pdf

STAS SR ISO 3662-1995 Hydraulic fluid power - Pumps and motors - Geometric displacements《液压流体动力 泵和马达 几何排量 》.pdf